Institut de Chimie Moléculaire et des Matériaux d'Orsay

Synthèse, Propriétés et Modélisation des Matériaux

Publications of SP2M team

2024

Weak ferromagnetism in morphotropic phase boundary of BiFeO3-based materials. N.-D. Long, C.-V. Ha, Q.-N. Pham, E. Riviere, N. Tran, N.-T.-M. Hong, D.-V. Karpinsky, L.-T. Ha, P.-T. Thanh, T. Six, P.-M. An, P.-T. Tho, N.-Q. Hai, Journal of Alloys and Compounds, 2024, 174169

Correlation between microstructure, magnetic properties and mechanical behavior of the Permimphy alloy after high-pressure torsion. O. Dabou, T. Baudin, F. Brisset, T. Waeckerlé, Y. Ateba Betanda, Y. Huang, A.-L. Helbert, D. Bradai, T. G. Langdon, Journal of Materials Science, 2024

Enhancement of fatigue properties of selective laser melting fabricated TC4 alloy by multiple shot peening treatments. M. Chen, W. Deng, H. Liu, R. Wang, M. Wang, Y. Duan, C. Jiang, V. Ji, International Journal of Fatigue, 2024, 108215

Microstructural characterization and wear performance of shot-peened TA15 titanium alloy fabricated by SLM. Y. Ang, Y. Wenliang, Z. Wenlong, L. Wenbo, V. Ji, C. Jiang, Materials Characterization, 2024, 113747

Hydrogen on screw dislocation in Fe and W: Existence of 3D-compound and exotic segregation profile. F. Berthier, N. Longa, J. Creuze, B. Legrand, Acta Materialia, 2024, 267, 119714

On some features of the grain and subgrain size in a Cu-Cr-Zr alloy after ECAP processing and aging. K. Abib, B. Alili, T. Baudin, A.-L. Helbert, F. Brisset, L. Litynska-Dobrzynska, P. Zieba, D. Bradai, Archives of Metallurgy and Materials, 2024, 69, 9-16

Estimating dislocation density from electron backscatter diffraction data for an AZ31/Mg-0.6Gd hybrid alloy fabricated by high-pressure torsion. T. Baudin, H. Azzeddine, F. Brisset, Y. Huang, T. G. Langdon, Philosophical Magazine, 2024, 1, 1-17

Influence of Dy3+ environment on magnetic anisotropy and magnetocaloric effect in Dy3B2C3O12 (B = In, Sc, Te; C = Ga, Al, Li) garnets. F. Damay, S. Petit, D. Sheptyakov, C. V. Colin, E. Suard, S. Rols, J. Embs, U. Stuhr, D. Bounoua, O. Demortier, C. Decorse, Physical Review B, 2024, 109, 014419

Space variant fiber nanogratings induced by femtosecond laser direct writing. J. Lu, L. Teng, Q. Zhai, C. Wang, M. Lancry, Y. Dai, X. Zeng, Applied Surface Science, 2024, 646, 158787

Materials roadmap for inscription of nanogratings inside transparent dielectrics using ultrafast lasers. H. Yao, Q. Xie, M. Cavillon, Y. Dai, M. Lancry, Progress in Materials Science, 2024, 142, 101226

Nanoscale investigations of femtosecond laser induced nanogratings in optical glasses. Q. Xie, N. Shchedrina, M. Cavillon, B. Poumellec, M. Lancry, Nanoscale Advances, 2024, 6, 489-498

Engineering Directional Charge Carrier Transport Using Ferroelectric Polarization for Enhanced Photoelectrochemical Water Oxidation. Q. Xu, D. Berardan, F. Brisset, C. Colbeau-Justin, M. N. Ghazzal, Small, 2024, n/a, 2308750

Quantification of Crystalline Phases in Hf0.5Zr0.5O2 Thin Films through Complementary Infrared Spectroscopy and Ab Initio Supercell Simulations. R. Cervasio, E. Amzallag, M. Verseils, P. Hemme, J.-B. Brubach, I. Canero Infante, G. Segantini, P. Rojo Romeo, A. Coati, A. Vlad, Y. Garreau, A. Resta, B. Vilquin, J. Creuze, P. Roy, ACS Applied Materials & Interfaces, 2024, 16, 3829-3840

Effect of laser shock peening on surface integrity and tensile fatigue behavior of TB8 bolts. Y. Zhang, X. Jian, F. Xia, D. Shi, L. Wu, L. Liu, V. Ji, Engineering Failure Analysis, 2024, 157, 107968

Lattice Dynamics, Transport and Thermoelectric Properties of Bi-Sb Alloys Obtained by Mechanical Alloying and Spark Plasma Sintering. R. Viennois, L. Alvarez, L. Coulomb, Y. El Mastour, M. Fabbiani, B. Villeroy, D. Bérardan, A. Moll, M. Beaudhuin, Metals, 2024, 14

Enhanced thermoelectric properties of p-type α-SrSi2 nanostructured by melt spinning. R. Ghannam, L. Coulomb, A. Moll, D. Bérardan, A. Vieira E Silva, B. Villeroy, R. Viennois, M. Beaudhuin, Solid State Sciences, 2024, 147, 107406

Microstructure and properties of HEA fabricated through metal powder wire arc additive manufacturing. A. Zavdoveev, H. S. Kim, Y.-U. Heo, T. Baudin, P. Cortes, F. Brisset, D.-H. Kim, D. Vedel, A. Klapatyuk, A. Gajvoronskiy, V. Poznyakov, E. Pashinska, S. Motrunich, Materials Letters, 2024, 357, 135726

Mechanical strength of different zirconia thin films in relation with their thickness. C. Berdin, N. Prud'Homme, Engineering Fracture Mechanics, 2024, 295, 109743

2023

Microstructural and Mechanical Characterization of Large Surfaces after Laser Cladding by Wavering of Nickel Coating on Cast-Iron Molds Used in Glass Industry. F. Bourahima, T. Lauridant, C. Guasch, A. L. Helbert, T. Baudin, Key Engineering Materials, 2023, 964, 151-156

Basics of additive manufacturing processes for high entropy alloys. A. Zavdoveev, T. Baudin, D.-G. Mohan, D. Pakula, D. Vedel, M. Skoryk, Progress in Physics of Metals, 2023, 24, 561-592

Comparative study of thin layers modeling in electromagnetism: Application to multilayer magnetic shielding. K. Etse, P. Clérico, L. Prevond, A.-L. Helbert, T. Baudin, X. Mininger, IEEE Transactions on Electromagnetic Compatibility, 2023, 65, 1351-1359

Effect of Deformation Rate on the Microstructure and Drawability of Medium-Carbon Steel. T. Abid, M. C. Nebbar, M. Zidani, M. Redouane, T. Baudin, Metal Science and Heat Treatment, 2023, 64, 495-502

Effect of Pulse Current GMAW on the Yield Stress of the S460M TMCP Steel Welded Joints. A. Zavdoveev, P. Zok, V. Pozniakov, M. Rogante, T. Baudin, M. Heaton, A. Gaivoronskiy, S. Zhdanov, P. Acquier, T. Solomijchuk, V. Kostin, M. Skoryk, I. Klochkov, S. Motrunich, Metals and Materials International, 2023, 29, 795-806

Thermoelectric Properties of High-Entropy Wolframite Oxide: (CoCuNiFeZn)1−xGaxWO4. A. Kumar, A. Moll, M. N. Mouhamadsiradjoudine, F. Brisset, D. Berardan, N. Dragoe, physica status solidi (RRL) – Rapid Research Letters, 2023, n/a, 2300372

Optical and structural characterization of femtosecond laser written micro-structures in germanate glass. R. Zaiter, M. Lancry, A. Fargues, F. Adamietz, M. Dussauze, V. Rodriguez, B. Poumellec, T. Cardinal, Scientific Reports, 2023, 13, 11050

Investigating densification processes of amorphous silica phases through activation energy distribution. N. Shchedrina, N. Ollier, M. Mobasher, M. Lancry, Journal of Non-Crystalline Solids, 2023, 617, 122491

Femtosecond laser direct writing multilayer chiral waveplates with minimal linear birefringence. J. Lu, E. Garcia-Caurel, R. Ossikovski, F. Courvoisier, X. Zeng, B. Poumellec, M. Lancry, Optics Letters, 2023, 48, 271-274

Structural, microstructural, and textural modifications of meringues induced by low-pressure baking process. J.-B. Scolan, E. Vennat, B. Smaniotto, L. Pillard, F. Corlay, R. Haumont, International Journal of Gastronomy and Food Science, 2023, 33, 100767

Impact of the nanostructuring on the thermal and thermoelectric properties of α-SrSi2. R. Ghannam, A. Moll, D. Bérardan, L. Coulomb, A. Vieira-E-Silva, B. Villeroy, R. Viennois, M. Beaudhuin, Journal of Alloys and Compounds, 2023, 968, 171876

Effect of long-term natural aging on the microstructural characteristics of an extruded WE54 alloy. H. Azzeddine, T. Baudin, F. Brisset, Current Applied Physics, 2023, 54, 38-43

Evaluation of Thermal Stability and Its Effect on the Corrosion Behaviour of Mg-RE Alloys Processed by High-Pressure Torsion. H. Azzeddine, A. Hanna, A. Dakhouche, T. Baudin, F. Brisset, Y. Huang, T. G. Langdon, Crystals, 2023, 13, 662

Investigation of Microstructure and Texture Evolution in an AZ31/Mg–Gd Alloy Hybrid Metal Fabricated by High-Pressure Torsion. O. Ould Mohamed, H. Azzeddine, Y. Huang, T. Baudin, P. Bazarnik, F. Brisset, M. Kawasaki, T. G. Langdon, Advanced Engineering Materials, 2023, 25, 2201794

Effect of heat treatment on the welded joint of X70 steel joined to duplex stainless steel by gas tungsten arc welding. O. Beziou, I. Hamdi, Z. Boumerzoug, F. Brisset, T. Baudin, The International Journal of Advanced Manufacturing Technology, 2023, 127, 2799-2814

Local Microstructure and Texture Development during Friction Stir Spot of 5182 Aluminum Alloy. T. Baudin, S. Bozzi, F. Brisset, H. Azzeddine, Crystals, 2023, 13, 540

On the microstructure and texture of intermetallics in Al/Mg/Al multi-layer composite fabricated by Accumulative Roll Bonding. I. Bencherifa, B. Alili, T. Baudin, F. Brisset, D. Thiaudière, C. Mocuta, D. Bradai, Micron, 2023, 173, 103507

Grain growth activation energy of ECAP-processed Mg-Ce alloy: Effect of deformation temperature. H. Azzeddine, S. Sadi, A. Hanna, T. Baudin, F. Brisset, J. M. Cabrera, Materials Today Communications, 2023, 37, 107161

A Comparative Study Between AZ31 and Mg-Gd Alloys After High-Pressure Torsion. O. O. Mohamed, P. Bazarnik, Y. Huang, H. Azzeddine, T. Baudin, F. Brisset, T. G. Langdon, Journal of Materials Engineering and Performance, 2023, online

Evolution of the texture, microstructure, and magnetic properties of a Permimphy alloy after accumulative roll bonding and aging. O. Dabou, A. Bensouilah, T. Baudin, F. Brisset, L. Perrière, A.-L. Helbert, D. Bradai, Journal of Materials Science, 2023, 58, 15884-15900

An EBSD analysis of a commercial immiscible Cu43%Cr alloy after high-pressure torsion processing and annealing. I. Bibimoune, K. Abib, T. Baudin, F. Brisset, Y. Huang, D. Bradai, T. G. Langdon, Philosophical Magazine, 2023, 104, 88-114

3D structured Bessel beam polarization and its application to imprint chiral optical properties in silica. J. Lu, M. Hassan, F. Courvoisier, E. Garcia-Caurel, F. Brisset, R. Ossikovski, X. Zeng, B. Poumellec, M. Lancry, APL Photonics, 2023, 8, 060801

Stability of untransformed ferrite in 10Cr ODS steel. A. Durand, D. Sornin, O. Taché, T. Guilbert, F. Brisset, L. Delbes, B. Baptiste, T. Baudin, R. Logé, Journal of Nuclear Materials, 2023, 574, 154146

Non-equimolar Cantor high entropy alloy fabrication using metal powder cored wire arc additive manufacturing. A. Zavdoveev, A. Klapatyuk, T. Baudin, E. Macdonald, D. Mohan, J.-P. Oliveira, A. Gajvoronskiy, V. Poznyakov, H. S. Kim, F. Brisset, M. Khokhlov, M. Heaton, M. Rogante, M. Skoryk, D. Vedel, R. Kozin, I. Klochkov, S. Motrunich, Additive Manufacturing Letters, 2023, 6, 100124

Plasma deposition of silver nanoparticles onto poly(ethylene terephthalate) surfaces for the preparation of antimicrobial materials. H. Salmi-Mani, G. Balthazar, C. Atkins, C. Aymes-Chodur, P. Ribot, G. Terreros, N. Barroca-Aubry, C. Regeard, P. Roger, Journal of Coatings Technology and Research, 2023, 20, 1395-1405

Tailoring chiral optical properties by femtosecond laser direct writing in silica. J. Lu, J. Tian, B. Poumellec, E. Garcia-Caurel, R. Ossikovski, X. Zeng, M. Lancry, Light: Science & Applications, 2023, 12, 46

Contact Fatigue Behavior Evolution of 18CrNiMo7-6 Gear Steel Based on Surface Integrity. L. Wu, Y. Lv, Y. Zhang, A. Li, V. Ji, Metals, 2023, 13, 1605

Investigation of intense visible defect luminescence from visible and infrared pumped barium fluorosilicate glass-core fiber. A. R. Pietros, K. Rebeszko, J. R. Rosenbaum, M. P. Stone, A. Brasovs, K. G. Kornev, T. Hawkins, M. Cavillon, J. Ballato, P. D. Dragic, Optical Materials: X, 2023, 19, 100231

Electrostatic Interpretation of Phase Separation Induced by Femtosecond Laser Light in Glass. B. Poumellec, M. Cavillon, M. Lancry, Crystals, 2023, 13

Volume nanogratings inscribed by ultrafast IR laser in alumino-borosilicate glasses. H. Yao, Q. Xie, M. Cavillon, D. R. Neuville, D. Pugliese, D. Janner, Y. Dai, B. Poumellec, M. Lancry, Optics Express, 2023, 31, 15449-15460

Upper temperature limit for nanograting survival in oxide glasses. Q. Xie, M. Cavillon, B. Poumellec, M. Lancry, Applied Optics, 2023, 62, 6794-6801

Polarization-dependent orientation of LiNbO3:Eu3+ nanocrystals using ultrashort laser pulses in borosilicate glasses. J. Ari, M. Cavillon, M. Lancry, B. Poumellec, Advanced Optical Technologies, 2023, 12

Vibronic collapse of ordered quadrupolar ice in the pyrochlore magnet Tb2+xTi2−xO7+y. Y. Alexanian, J. Robert, V. Simonet, B. Langérôme, J.-B. Brubach, P. Roy, C. Decorse, E. Lhotel, E. Constable, R. Ballou, S. De Brion, Phys Rev B, 2023, 107, 224404

Investigation on microstructure and tribological performances of electrodeposited Ni-W-Y2O3 composite coatings. S. Xing, W. Zhu, S. You, W. Yu, C. Jiang, V. Ji, Journal of Alloys and Compounds, 2023, 965, 171397

The synthesis and mechanism of superhydrophobic coatings with multifunctional properties on aluminum alloys surface: a review. Q. Yang, J. Cao, R. Ding, K. Zhan, Z. Yang, B. Zhao, Z. Wang, V. Ji, Progress in Organic Coatings, 2023, 183, 107786

Novel entropy-stabilized fluorite oxides with multifunctional properties. A. Kumar, D. Bérardan, F. Brisset, D. Dragoe, N. Dragoe, Journal of Materials Chemistry A, 2023, 11, 14320-14332

Enhancements of critical current density in Bi1.6Pb0.4Sr2Ca2Cu3O10+δ superconductors by additions of SnO2 nanoparticles. L. H. Vu, A. T. Pham, N. D. Thien, N. H. Nam, E. Riviere, Q. N. Pham, N. K. Man, N. T. Binh, N. T.-M. Hong, L. V. Cuong, T. L. Nguyen, D. H. Tran, Ceramics International, 2023, 49, 27614-27621

Effect of crystal field engineering and Fermi level optimization on thermoelectric properties of Ge1.01Te: Experimental investigation and theoretical insight. A. Kumar, P. Bhumla, D. Sivaprahasam, S. Bhattacharya, N. Dragoe, Physical Review Materials, 2023, 7, 045402

Atomic-scale surface segregation in copper-gold nanoparticles. G. Breyton, H. Amara, J. Nelayah, J. Creuze, H. Guesmi, D. Alloyeau, G. Wang, C. Ricolleau, Physical Review Letters, 2023, 130, 236201

Compact A15 Frank-Kasper nano-phases at the origin of dislocation loops in face-centred cubic metals. A. M. Goryaeva, C. Domain, A. Chartier, A. Dézaphie, T. D. Swinburne, K. Ma, M. Loyer-Prost, J. Creuze, M.-C. Marinica, Nature Communications, 2023, 14, 3003

Adjusting the optical band gap of CsPbBr3-yXy (X=Cl, I) for optimal interfacial charge transfer and enhanced photocatalytic hydrogen generation. M. Knezevic, V.-D. Quach, I. Lampre, M. Erard, P. Pernot, D. Bérardan, C. Colbeau-Justin, M. N. Ghazzal, Journal of Materials Chemistry A, 2023, 11, 6226-6236

Magnetic and Electrical Properties of high-entropy rare-earth manganites. A. Kumar, D. Bérardan, D. Dragoe, E. Rivière, T. Takayama, H. Takagi, N. Dragoe, Materials Today Physics, 2023, 32, 101026

Microstructure, properties and synergetic effect of graphene oxide-functionalized carbon nanotubes hybrid reinforced copper matrix composites prepared by DC electrodeposition. J. Cao, Q. Yang, L. Zhou, H. Chen, K. Zhan, J. Liu, R. Ding, S. You, B. Zhao, V. Ji, Carbon, 2023, 212, 118157

Thermoelectric properties and lattice dynamics of tetragonal topological semimetal Ba3Si4. R. Viennois, M. M. Koza, A. Moll, M. Beaudhuin, Physical Chemistry Chemical Physics, 2023, 25, 1987

Experimental study of spinon-phonon coupling in spin-chain cuprates. D. Msika, D. Bounoua, O. Demortier, F. Damay, R. Saint-Martin, R. Heid, A. Ivanov, A. Piovano, F. Bourdarot, D. Bérardan, L. Pinsard-Gaudart, S. Petit, Physical Review B, 2023, 107, 104420

Surface integrity and tribological behavior of 17Cr2Ni2MoVNb steel under combined carburizing treatment and ultrasonic rolling. Y. Zhang, L. Wu, D. Shi, Z. Wang, H. Jin, L. Liu, S. Qu, V. Ji, Surface and Coatings Technology, 2023, 461, 129371

The microstructural features and strengthening mechanisms of Mg-Al-Zn-Ca-(RE) extruded alloys having high-volume fractions of second-phase particles. F. Wang, N. Dang, J. Chen, J. Li, T. Hu, W. Xiao, R. Zheng, V. Ji, C. Ma, Materials Science and Engineering: A, 2023, 868, 144765

Microstructure Evolution and Hardness Improvement of WC-Co Composites Sintered with Fe Substituting Part of Co Binder. X. Li, J. Zhang, Q. Zhang, X. Zhang, V. Ji, J. Liu, Coatings, 2023, 13

Investigation of the chemical versatility in high entropy pyrochlores. F. Vayer, C. Decorse, D. Bérardan, D. Dragoe, N. Dragoe, Journal of the American Ceramic Society, 2023, 106, 2601-2621

Thermoelectric properties of high-entropy rare-earth cobaltates. A. Kumar, D. Dragoe, D. Berardan, N. Dragoe, Journal of Materiomics, 2023, 9, 191-196

Chemical vapor deposition of entropy-stabilized rock-salt type oxide thin films. A. Raison, N. Prud'Homme, W. Wang, D. Dragoe, N. Dragoe, Materials Letters, 2023, 337, 133955

Influence of ordering phenomena on carbon segregation in tungsten screw dislocation. F. Berthier, B. Legrand, Acta Materialia, 2023, 245, 118610

Surface integrity and bending fatigue behavior of aeronautic gear steel under combined carburized treatment and shot peening. Y. Zhang, J. Wang, L. Wu, Z. Wang, L. Liu, V. Ji, S. Qu, International Journal of Fatigue, 2023, 169, 107488

Erosion-corrosion behaviour of shot peening treated nickel-aluminium bronze in simulated sand-containing seawater. C. Wang, X. Xiong, L. Yang, Y. Hong, S. She, H. Zhang, H. Liu, V. Ji, M. Li, Corrosion Science, 2023, 211, 110908

Investigation on the Evolution of Residual Stress in Ultrasonic Surface Rolling Treatment-Processed 18CrNiMo7-6 Alloy Steel. Z. Liu, H. Zhao, C. Zhang, Z. He, V. Ji, Transactions of the Indian Institute of Metals, 2023

2022

Optimization of the pulsed arc welding parameters for wire arc additive manufacturing in austenitic steel applications. A. Zavdoveev, V. Pozniakov, T. Baudin, H. S. Kim, I. Klochkov, S. Motrunich, M. Heaton, P. Aquier, M. Rogante, A. Denisenko, A. Gajvoronskiy, M. Skoryk, The International Journal of Advanced Manufacturing Technology, 2022, 119, 5175-5193

Texture evolution in high-pressure torsion processing. H. Azzeddine, D. Bradai, T. Baudin, T. G. Langdon, Progress in Materials Science, 2022, 125, 100886

Investigation of residual strain in quartzite using neutron diffraction: Interpretation and self-consistent modelling. J.-C. Guezou, H. Azzeddine, M. Ceretti, T. Baudin, Geological Journal, 2022, 57, 1125-1136

Photosensitivity of Infrared Glasses under Femtosecond Laser Direct Writing for mid-IR Applications. P. Delullier, L. Calvez, G. Druart, F. De La Barrière, C. Humbert, B. Poumellec, M. Lancry, Applied Sciences, 2022, 12

Space-selective creation of photonics functions in a new organic material: Femtosecond laser direct writing in Zeonex glass of refractive index change and photoluminescence. R. Que, L. Houel-Renault, M. Temagoult, C. Herrero, M. Lancry, B. Poumellec, Optical Materials, 2022, 133, 112651

Femtosecond Laser Direct Writing of Gradient Index Fresnel Lens in GeS2-Based Chalcogenide Glass for Imaging Applications. P. Delullier, G. Druart, F. De La Barrière, L. Calvez, M. Lancry, Applied Sciences, 2022, 12

Formation of a joint between deposited and base metals during laser cladding of a nickel-based powder onto a copper-based alloy. F. Bourahima, T. Baudin, M. Rege, V. Ji, F. Brisset, A. Zavdoveev, A.-L. Helbert, The Paton Welding Journal, 2022, 4, 26-33

Microstructure and texture evolution of the nonoriented silicon steel during the punching process. X. Fang, W. Wei, F. Brisset, A.-L. Helbert, T. Baudin, International Journal of Minerals, Metallurgy and Materials, 2022, 29, 2064-2071

Microstructure and texture evolution of ECAP-processed Mg-Ce alloy during isothermal annealing. S. Sadi, A. Hanna, T. Baudin, F. Brisset, J. M. Cabrera, H. Azzeddine, Materials Today Communications, 2022, 32, 103920

Microstructure and texture characterization in friction stir lap welded TIMETAL 21S. T. Baudin, F. Brisset, A. Zavdoveev, H. Azzeddine, Materials Characterization, 2022, 192, 112216

Lifetime prediction of nanogratings inscribed by a femtosecond laser in silica glass. Y. Wang, M. Lancry, M. Cavillon, B. Poumellec, Optics Letters, 2022, 47, 1242-1245

Application and validation of a viscosity approach to the existence of nanogratings in oxide glasses. Q. Xie, M. Cavillon, B. Poumellec, D. Pugliese, D. Janner, M. Lancry, Optical Materials, 2022, 130, 112576

On the Formation of Nanogratings in Commercial Oxide Glasses by Femtosecond Laser Direct Writing. Q. Xie, M. Cavillon, D. Pugliese, D. Janner, B. Poumellec, M. Lancry, Nanomaterials, 2022, 12

Formation of nanogratings driven by ultrafast laser irradiation in mid-IR heavy oxide glasses. H. Yao, R. Zaiter, M. Cavillon, P. Delullier, B. Lu, T. Cardinal, Y. Dai, B. Poumellec, M. Lancry, Ceramics International, 2022, 48, 31363-31369

Europium spectroscopic properties impacted by femtosecond laser 3D nanostructuring in lithium niobium borosilicate glasses. J. Ari, M. Cavillon, O. Plantevin, M. Lancry, B. Poumellec, Optical Materials: X, 2022, 16, 100198

3D Laser Engineering of Molten Core Optical Fibers: Toward a New Generation of Harsh Environment Sensing Devices. Y. Wang, M. Cavillon, J. Ballato, T. Hawkins, T. Elsmann, M. Rothhardt, R. Desmarchelier, G. Laffont, B. Poumellec, M. Lancry, Advanced Optical Materials, 2022, 10, 2200379

Unraveling higher-order contributions to spin excitations probed using resonant inelastic x-ray scattering. U. Kumar, A. Nag, J. Li, A. C. Walters, M. Garcia-Fernandez, R. Saint-Martin, A. Revcolevschi, J. Schlappa, T. Schmitt, S. Johnston, K. Zhou, Physical Review B, 2022, 106, L060406

Effect of Mo and C Additions on Eta Phase Evolution of WC-13Co Cemented Carbides. X. Li, X. Zhang, J. Zhang, Q. Zhang, V. Ji, J. Liu, Coatings, 2022, 12, 1993

Surface characteristic and corrosion resistance of different plasma-sprayed coatings (Zn, Al6061and Zn/23Al) on S960 high strength steel with subsequent micro-shot peening. J. Zheng, K. Li, Y. Zhang, K. Zhan, Z. Yang, B. Zhao, Z. Wang, V. Ji, Surface and Coatings Technology, 2022, 451, 129046

Phase transformations mechanism in commercially pure titanium subjected to multiple laser shock peening. L. Li, W. Jia, V. Ji, Surface and Coatings Technology, 2022, 450, 129010

Effect of laser shock peening on α→ω phase transformation in high-purity titanium. L. Li, W. Jia, V. Ji, Vacuum, 2022, 206, 111510

Modified Johnson–Cook Constitutive Model of 18CrNiMo7-6 Alloy Steel under Ultrasonic Surface Burnishing Process. Z. Liu, H. Zhao, J. Li, Z. Niu, V. Ji, Journal of Materials Engineering and Performance, 2022, 32, 4022-4030

Interface Resistivity in Ni/Cu Bilayers, and Ni/Pd bilayers Comparison of the Mode of Electrical Transport in Ni/Cu bilayers and Ni/Pd bilayers in Relation with the Chemical Reactions at the Interfaces of bilayers,. M.-K. Loudjani, International Journal of Thin Films Science and Technology, 2022, 11, 321-326

IR Spectroscopy of PbZr1–xTixO3 Material: A Complementary Experimental/Ab Initio Calculations Approach of a Solid Solution. R. Cervasio, Y. Peperstraete, T. Maroutian, R. Haumont, M. Verseils, J.-B. Brubach, R. Tétot, J. Creuze, P. Roy, E. Amzallag, The Journal of Physical Chemistry C, 2022, 126, 12860-12869

Sensitivity analysis and uncertainty propagation for SMA-TB potentials. M. Trochet, F. Berthier, P. Pernot, Computational Materials Science, 2022, 213, 111641

Surface characteristics and stress corrosion behavior of AA 7075-T6 aluminum alloys after different shot peening processes. L. Bao, K. Li, J. Zheng, Y. Zhang, K. Zhan, Z. Yang, B. Zhao, V. Ji, Surface and Coatings Technology, 2022, 440, 128481

Thermal and Electron Plasma Effects on Phase Separation Dynamics Induced by Ultrashort Laser Pulses. M. Cavaillon, J. Cao, M. Vallet, F. Brisset, L. Mazerolles, B. Dkhil, M. Lancry, B. Poumellec, Crystals, 2022, 12, 496

Superior photocatalytic activity of polypyrrole nanostructures prepared by radiolysis in water and dichloromethane. Y. Chouli, F. Belkhadem-Mokhtari, S. Abou-Zeid, D. Dragoe, R. Saint-Martin, F. Brisset, H. Remita, S. Remita, Radiation Physics and Chemistry, 2022, 195, 110079

Evaluation of static recrystallization and grain growth kinetics of hot-rolled AZ31 alloy. S. Sadi, A. Hanna, T. Baudin, A.-L. Helbert, F. Brisset, D. Bradai, H. Azzeddine, Journal of Metals, Materials and Minerals, 2022, 32, 12-26

Ab Initio Study of the Thermodynamics of Intrinsic Point Defects in Thermoelectric Oxychalcogenide BiCuSeO. D. Goury, E. Amzallag, D. Berardan, J. Creuze, The Journal of Physical Chemistry C, 2022, 126, 5960-5969

Effect of size on the surface energy of noble metal nanoparticles from analytical and numerical approaches. H. Amara, J. Nelayah, J. Creuze, A. Chmielewski, D. Alloyeau, C. Ricolleau, B. Legrand, Physical Review B, 2022, 105, 165403

Surface characteristic and wear resistance of S960 high-strength steel after shot peening combing with ultrasonic sprayed graphene oxide coating. Z. Yang, J. Zheng, K. Zhan, C. Jiang, V. Ji, Journal of Materials Research and Technology, 2022, 18, 978-689

Effect of Ti microparticles on the microstructure and properties of Ni-Ti composite coating prepared by electrodeposition. L. Wang, J. Ren, Y. Zhao, V. Ji, H. Liu, M. Liu, Z. Wang, C. Jiang, Z. Wang, Journal of Alloys and Compounds, 2022, 908, 164313

Kinetics and energetics of room-temperature microstructure in nanocrystalline Cu films: The grain-size dependent intragrain strain energy. Z. Chai, X. Huang, Z. Yu, V. Ji, C. Jiang, X. Chen, Journal of Applied Physics, 2022, 131, 055301

Estimating linear mass transport coefficients in solid solutions via correlation splitting and a law of total diffusion. M. Athènes, G. Adjanor, J. Creuze, Physical Review Materials, 2022, 6, 013805

Absorption kinetics of vacancies by cavities in aluminum: Numerical characterization of sink strengths and first-passage statistics through Krylov subspace projection and eigenvalue deflation. S. Kaur, M. Athènes, J. Creuze, Journal of Computational Physics, 2022, 454, 110987

Effect of ECAP and Subsequent Annealing on Microstructure, Texture, and Microhardness of an AA6060 Aluminum Alloy. T. Khelfa, R. Lachhab, H. Azzeddine, Z. Chen, J. A. Muñoz, J. M. Cabrera-Marrero, F. Brisset, A.-L. Helbert, T. Baudin, M. Khitouni, Journal of Materials Engineering and Performance, 2022, 31, 2606-2623

Tribological Behavior and Corrosion Resistance of S30432 Steel after Different Shot Peening Processes. K. Zhan, Y. Zhang, S. Zhao, Z. Yang, B. Zhao, V. Ji, Journal of Materials Engineering and Performance, 2022, 31, 1250-1258

The synergistic role of Ti microparticles and CeO2 nanoparticles in tailoring microstructures and properties of high-quality Ni matrix nanocomposite coating. L. Wang, S. Xing, Z. Shen, H. Liu, C. Jiang, V. Ji, Y. Zhao, Journal of Materials Science & Technology, 2022

2021

Effect of heat treatment on the mechanical properties and microstructure of HSLA steels processed by various technologies. A. Zavdoveev, V. Poznyakov, T. Baudin, M. Rogante, H. S. Kim, M. Heaton, Y. Demchenko, V. Zhukov, M. Skoryk, Materials Today Communications, 2021, 28, 102598

Welding Thermal Cycle Impact on the Microstructure and Mechanical Properties of Thermo–Mechanical Control Process Steels. A. Zavdoveev, V. Poznyakov, T. Baudin, M. Heaton, H. S. Kim, P. Acquier, M. Skory, M. Rogante, A. Denisenko, Steel Research International, 2021, 92, 2000645

Optimization by calculation method of pulsed-arc welding modes using high alloy welding material. A.-V. Zavdoveev, V.-D. Poznyakov, O.-A. Gaivoronsky, A.-M. Denysenko, T. Baudin, The Paton Welding Journal, 2021, 4, 9-13

Reduced quantum defect in a Yb-doped fiber laser by balanced dual-wavelength excitation. N. Yu, K. V. Desai, A. E. Mironov, M. Xiong, M. Cavillon, T. Hawkins, J. Ballato, J. G. Eden, P. D. Dragic, Applied Physics Letters, 2021, 119, 141105

Thermal Stability of Type II Modifications Inscribed by Femtosecond Laser in a Fiber Drawn from a 3D Printed Preform. Y. Wang, S. Wei, M. Cavillon, B. Sapaly, B. Poumellec, G.-D. Peng, J. Canning, M. Lancry, Applied Sciences, 2021, 11, 600

An Overview of the Thermal Erasure Mechanisms of Femtosecond Laser-Induced Nanogratings in Silica Glass. Y. Wang, M. Cavillon, N. Ollier, B. Poumellec, M. Lancry, Physica Status Solidi (A), 2021, 218, 2100023

Photosensitivity of barium germano-gallate glasses under femtosecond laser direct writing for Mid-IR applications. H. Yao, R. Zaiter, M. Cavillon, B. Sapaly, F. Calzavara, P. Delullier, T. Cardinal, Y. Dai, B. Poumellec, M. Lancry, Ceramics International, 2021, 47, 34235-34241

Intrinsic non-stoichiometry and anomalous transport properties of layered oxysulfide LaOPbBiS3. C. Roux-Byl, D. Bérardan, Journal of Materials Chemistry C, 2021, 9, 12839-12848

Synthesis of (MgCoNiCuZn)O entropy-stabilized oxides using solution-based routes: influence of composition on phase stability and functional properties. W. Mnasri, D. Bérardan, S. Tusseau-Nenez, T. Gacoin, I. Maurin, N. Dragoe, Journal of Materials Chemistry C, 2021, 9, 15121-15131

In- and out-plane transport properties of chemical vapor deposited TiO2 anatase films. A. Miquelot, L. Youssef, C. Villeneuve-Faure, N. Prud’Homme, N. Dragoe, A. Nada, V. Rouessac, S. Roualdes, J. Bassil, M. Zakhour, M. Nakhl, C. Vahlas, Journal of Materials Science, 2021, 56, 10458-10476

Mechanism of Blunt Punching Tools: Influence on Deformation and Residual Stress Distribution. W. Wang, X. Fang, X. Wang, M. Andrieux, V. Ji, Metals, 2021, 11, 2029

Probing the interplay between lattice dynamics and short-range magnetic correlations in CuGeO3 with femtosecond RIXS. E. Paris, C. W. Nicholson, S. Johnston, Y. Tseng, M. Rumo, G. Coslovich, S. Zohar, M. F. Lin, V. N. Strocov, R. Saint-Martin, A. Revcolevschi, A. Kemper, W. Schlotter, G. L. Dakovski, C. Monney, T. Schmitt, npj Quantum Materials, 2021, 6, 51

Polarization-oriented LiNbO3 nanocrystals by femtosecond laser irradiation in LiO2 Nb2O5 SiO2 B2O3 glasses. E. Muzi, M. Cavillon, M. Lancry, F. Brisset, B. Sapaly, D. Janner, B. Poumellec, Optical Materials Express, 2021, 11, 1313-1320

Heterogeneity of microstructure, texture and mechanical properties along the building direction of Ti-6Al-4V alloy developed by SLM. C. Widomski, D. Solas, T. Baudin, F. Brisset, S. Lebel, A.-L. Helbert, Mater. Sci. Eng., 2021, 1121, 012031

Characterization of microstructure and texture of binary Mg-Ce alloy processed by equal channel angular pressing. S. Sadi, A. Hanna, H. Azzeddine, C. Casas, T. Baudin, A.-L. Helbert, F. Brisset, J. M. Cabrera, Materials Characterization, 2021, 181, 111454

Numerical homogenization and experimental study of the influence of graphite content and voids on the coefficients of thermal expansion of 2017 Aluminium matrix composites. M. Bhouri, F. Mzali, C. Berdin, F. Di Paola, Materials Today Communications, 2021, 26, 101638

Surface characteristic and wear resistance of QT-700-2 nodular cast iron after laser quenching combing with shot peening treatment. K. Zhan, Y. Zhang, L. Bao, Z. Yang, B. Zhao, V. Ji, Surface and Coatings Technology, 2021, 423, 127589

New entropy-stabilized oxide with pyrochlore structure: Dy2(Ti0.2Zr0.2Hf0.2Ge0.2Sn0.2)2O7. F. Vayer, C. Decorse, D. Berardan, N. Dragoe, Journal of Alloys ans Compounds, 2021, 883, 160773

Effective site energy and cluster expansion approaches for the study of phase diagrams. F. Berthier, Q. Lullien, B. Legrand, Physical Review B, 2021, 104, 014111

Effect of water incorporation on the ionic conduction properties of the solid electrolyte material Rb2Ti2O5.(H2O)x. S. De Sousa Coutinho, D. Bérardan, G. Lang, R. Federicci, P. Giura, K. Beneut, N. Dragoe, S. Holé, B. Leridon, Solid State Ionics, 2021, 364, 115630

Resistivity of Bilayers Ni/Pd Films and Ni1-xPdx Alloys Films. M.-K. Loudjani, C. Sella, International Journal of Thin Films Science and Technology, 2021, 10, 75-79

Strain localization and delamination mechanism of cold-drawn pearlitic steel wires during torsion. A. Jamoneau, D. Solas, J. Bourgon, P. Morisot, J.-H. Schmitt, Materials Science and Engineering: A, 2021, 814, 141222

On the evolution of microstructure, texture and corrosion behavior of a hot-rolled and annealed AZ31 alloy. S. Tighiouaret, A. Hanna, H. Azzeddine, L. Rabahi, A. Dakhouche, F. Brisset, A.-L. Helbert, T. Baudin, D. Bradai, Materials Chemistry and Physics, 2021, 267, 124598

Towards a Rationalization of Ultrafast Laser-Induced Crystallization in Lithium Niobium Borosilicate Glasses: The Key Role of the Scanning Speed. E. Muzi, M. Cavillon, M. Lancry, F. Brisset, R. Que, D. Pugliese, D. Janner, B. Poumellec, Crystals, 2021, 11, 290

Characterization of untransformed ferrite in 10Cr and 12Cr ODS steels. A. Durand, D. Sornin, Y. D. Carlan, G. Spartacus, F. Brisset, L. Delbes, B. Baptiste, T. Baudin, R. Logé, Materialia, 2021, 16, 101066

From metastability to equilibrium during the sequential growth of Co-Ag supported clusters: a real-time investigation. P. Andreazza, A. Lemoine, A. Coati, D. Nelli, R. Ferrando, Y. Garreau, J. Creuze, C. Andreazza-Vignolle, Nanoscale, 2021, 13, 6096-6104

Surface residual stress and microstructure evolutions of Hastelloy X alloy after severe shot peening. M. Chen, S. Xing, J. Li, J. He, Y. Lu, C. Jiang, V. Ji, Vacuum, 2021, 187, 110136

Theoretical analysis and performance prediction on modified surface layer caused by ultrasonic surface rolling. Z. Liu, C. Zhang, H. Zhao, V. Ji, D. Wang, The International Journal of Advanced Manufacturing Technology, 2021, 113, 1307-1330

Unveiling the Residual Stresses, Local Micromechanical Properties and Crystallographic Texture in a Ti-6Al-4V Weld Joint. B. Mehdi, R. Badji, V. Ji, B. Alili, D. Bradai, W. Bedjaoui, F. Deschaux-Beaume, F. Brisset, Acta Metallurgica Sinica (English Letters), 2021, 34, 997-1006

Study of the Microstructure and Mechanical Properties Obtained by Laser Boost in SLM Process for the Ti-64 Alloy. C. Widomski, D. Solas, F. Brisset, A. L. Helbert, T. Baudin, S. Lebel, Materials Science Forum, 2021, 1016, 1611-1617

Continuous Severe Plastic Deformation of Low-Carbon Steel: Physical–Mechanical Properties and Multiscale Structure Analysis. A. Zavdoveev, T. Baudin, E. Pashinska, H. S. Kim, F. Brisset, M. Heaton, V. Poznyakov, M. Rogante, V. Tkachenko, I. Klochkov, M. Skoryk, Steel Research International, 2021, 92, 2000482

A stored energy analysis of grains with shear texture orientations in Cu-Ni-Si and Fe-Ni alloys processed by high-pressure torsion. H. Azzeddine, T. Baudin, A.-L. Helbert, F. Brisset, Y. Huang, M. Kawasaki, D. Bradai, T. G. Langdon, Journal of Alloys and Compounds, 2021, 864, 158142

Multi-Scale Characterization by Neutronography and Electron Diffraction of Ni Coating on Cu-Ni-Al or Cast-Iron Glass Molds after Laser Cladding. F. Bourahima, A. L. Helbert, F. Ott, V. Ji, M. Rege, F. Brisset, A. Courteaux, T. Baudin, Materials Science Forum, 2021, 1016, 297-302

Toughening effects of Mo and Nb addition on impact toughness and crack resistance of titanium alloys. S. Huang, Q. Zhao, Y. Zhao, C. Lin, C. Wu, W. Jia, C. Mao, V. Ji, Journal of Materials Science & Technology, 2021, 79, 147-164

Microstructure evolution and mechanical properties of a lamellar near-α titanium alloy treated by laser shock peening. W. Jia, Y. Zan, C. Mao, S. Li, W. Zhou, Q. Li, S. Zhang, V. Ji, Vacuum, 2021, 184, 109906

Effects of ultrasonic surface rolling on fretting wear behaviors of a novel 25CrNi2MoV steel. Y. Zhang, L. Huang, F. Lu, S. Qu, V. Ji, X. Hu, H. Liu, Materials Letters, 2021, 284, 128955

Effect of stress shot peening on the residual stress field and microstructure of nanostructured Mg-8 Gd-3 Y alloy. H. Liu, X. Wei, S. Xing, L. Wang, W. Zhu, C. Jiang, V. Ji, K. Zhan, Journal of Materials Research and Technology, 2021, 10, 74-83

2020

Improved SMTB-Q model applied to oxygen migration and pressure phase transitions in UO2. D. Mbongo, R. Tétot, R. Ducher, R. Dubourg, N. Salles, Journal of Physics: Condensed Matter, 2020, 32, 095701

Thermal Stability of Type II Modifications by IR Femtosecond Laser in Silica-based Glasses. S.-E. Wei, Y. Wang, H. Yao, M. Cavillon, B. Poumellec, G.-D. Peng, M. Lancry, Sensors, 2020, 20, 762

PC-GMAW effect on the welding thermal cycle and weld metal geometry for high strength steels. A. Zavdoveev, V. Poznyakov, H.-S. Kim, M. Rogante, M. Heaton, T. Baudin, International Journal of Engineering and Safety Sciences, 2020, 1, 5-16

Influence of pulsed-arc welding conditions on change of parameters of weld and haz of welded joints and mechanical properties of low-alloy steels. A. Zavdoveev, V.-D. Poznyakov, S.-L. Zhdanov, M. Rogante, T. Baudin, The Paton Welding Journal, 2020, 12, 21-26

Shear impact during steel wire drawing on grain boundaries and mechanical properties. A. Zavdoveev, T. Baudin, M. Rogante, E. Pashinska, M. Skoryk, Letters on Materials, 2020, 10, 558-565

Development of the PC-GMAW welding technology for TMCP steel in accordance with welding thermal cycle, welding technique, structure, and properties of welded joints. A. Zavdoveev, M. Rogante, V. Poznyakov, M. Heaton, P. Acquier, H. S. Kim, T. Baudin, V. Kostin, Reports in Mechanical Engineering, 2020, 1, 26-33

Magnetic shielding of a thin Al/steel/Al composite. P. Clérico, X. Mininger, L. Prévond, T. Baudin, A.-L. Helbert, COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, 2020, 39, 595-609

Probabilistic and deterministic full field approaches to simulate recrystallization in ODS steels. F. Villaret, B. Hary, Y. De Carlan, T. Baudin, R. Logé, L. Maire, M. Bernacki, Computational Materials Science, 2020, 179, 109646

Single crystal growth, optical absorption and luminescence properties under VUV-UV synchrotron excitation of type III Pr3+:KGd(PO3)4. I. Adell, M. C. Pujol, R. M. Solé, M. Lancry, N. Ollier, M. Aguiló, F. Díaz, Scientific Reports, 2020, 10, 6712

Femtosecond laser direct writing in SiO2-Al2O3 binary glasses and thermal stability of Type II permanent modifications. Y. Wang, S. Wei, M. R. Cicconi, Y. Tsuji, M. Shimizu, Y. Shimotsuma, K. Miura, G.-D. Peng, D. R. Neuville, B. Poumellec, M. Lancry, Journal of the American Ceramic Society, 2020, 103, 4286-4294

Radiation-induced absorption and photobleaching in erbium Al–Ge-codoped optical fiber. R. Dardaillon, M. Lancry, M. Myara, C. Palermo, P. Signoret, Journal of Materials Science, 2020, 55, 14326-14335

Impact of Al2O3 doping on Bi active center photobleaching in Bi/Er-codoped fibers. S. Wei, Y. Luo, B. Zhang, M. Lu, M. Ding, Y. Wang, M. Lancry, G.-D. Peng, Optics Letters, 2020, 45, 4016-4019

Helical distributed feedback fiber Bragg gratings and rocking filters in a 3D printed preform-drawn fiber. J. Canning, Y. Wang, M. Lancry, Y. Luo, G.-D. Peng, Optics Letters, 2020, 45, 5444-5447

Accurate modeling of radiation-induced absorption in Er-Al-doped silica fibers exposed to high-energy ionizing radiations. R. Dardaillon, C. Palermo, M. Lancry, M. Myara, R. K. Kribich, P. Signoret, Optics Express, 2020, 28, 4694-4707

A Comparison between Nanogratings-Based and Stress-Engineered Waveplates Written by Femtosecond Laser in Silica. J. Tian, H. Yao, M. Cavillon, E. Garcia-Caurel, R. Ossikovski, M. Stchakovsky, C. Eypert, B. Poumellec, M. Lancry, Micromachines, 2020, 11, 131

Random lasing from optical fibers with phase separated glass cores. S. Jagannathan, L. Ackerman, W. Chen, N. Yu, M. Cavillon, M. Tuggle, T. W. Hawkins, J. Ballato, P. D. Dragic, Optics Express, 2020, 28, 22049-22063

Crystal Structure, Lattice Dynamics and Thermodynamic Properties of Thermoelectric Orthorhombic BaCu2Se2 Compound. R. Viennois, D. Bérardan, C. Popescu, Journal of Physical Chemistry C, 2020, 124, 13627-13638

Assessing the potential of LiPON-based double layer microsupercapacitors for on-chip power storage. V. Sallaz, S. Oukassi, F. Voiron, R. Salot, D. Bérardan, Journal of Power Sources, 2020, 451, 227786

Residual Stresses and Microstructural Features of Rotary-Friction-Welded from Dissimilar Medium Carbon Steels. E. Priymak, Z. Boumerzoug, A. Stepanchukova, V. Ji, Physics of Metals and Metallography, 2020, 121, 1339-1346

Erasure of nanopores in silicate glasses induced by femtosecond laser irradiation in the Type II regime. M. Cavillon, Y. Wang, B. Poumellec, F. Brisset, M. Lancry, Applied Physics A: Materials Science & Processing, 2020, 126, 876

Space-Selective Control of Functional Crystals by Femtosecond Laser: A Comparison between SrO-TiO2-SiO2 and Li2O-Nb2O5-SiO2 Glasses. X. He, Q. Liu, M. Lancry, F. Brisset, B. Poumellec, Crystals, 2020, 10, 979-991

The Microstructure, Texture and Mechanical Properties of Friction Stir Welded Aluminum Alloy. S. Gachi, M. Aissani, T. Baudin, A.-L. Helbert, F. Brisset, S. Gautrot, M.-H. Mathon, D. Bradai, F. Boubenider, Russian Journal of Non-Ferrous Metals, 2020, 61, 523–533

Dry reforming of methane over calcium-deficient hydroxyapatite supported cobalt and nickel catalysts. T. Q. Tran, D. Pham Minh, T. S. Pham, Q. N. Pham, H. Nguyen Xuan, Chemical Engineering Science, 2020, 228, 115975

Terahertz magneto-optical investigation of quadrupolar spin-lattice effects in magnetically frustrated Tb2Ti2O7. K. Amelin, Y. Alexanian, U. Nagel, T. Rõõm, J. Robert, J. Debray, V. Simonet, C. Decorse, Z. Wang, R. Ballou, E. Constable, S. De Brion, Physical Review B, 2020, 102, 134428

Microstructure evolution and residual stress distribution of nanostructured Mg-8Gd-3Y alloy induced by severe shot peening. H. Liu, W. Zhu, C. Jiang, M. Guagliano, S. Xing, L. Wang, V. Ji, K. Zhan, Surface and Coatings Technology, 2020, 404, 126465

Mechanical properties of CoCrCuFeNi multi-principal element alloy thin films on Kapton substrates. C.-H. Li, R. Dedoncker, L.-W. Li, F. Sedghgooya, F. Zighem, V. Ji, D. Depla, P. Djemia, D. Faurie, Surface and Coatings Technology, 2020, 402, 126474

Mechanical Properties and Texture Evolution of High-Carbon Steel Wires during Wire Drawing: Strand Manufacturing. A. Kisrane-Bouzidi, M. Zidani, M.-C. Nebbar, T. Abid, A.-L. Helbert, F. Brisset, T. Baudin, International Journal of Engineering Research in Africa, 2020, 49, 130-138

Microstructural and textural investigation of an Mg–Dy alloy after hot plane strain compression. F. Guerza-Soualah, H. Azzeddine, T. Baudin, A.-L. Helbert, F. Brisset, D. Bradai, Journal of Magnesium and Alloys, 2020, 8, 1198-1207

Microstructures and rolling contact fatigue behaviors of 17Cr2Ni2MoVNb steel under combined ultrasonic surface rolling and shot peening. Y. Zhang, S. Qu, F. Lu, F. Lai, V. Ji, H. Liu, X. Li, International Journal of Fatigue, 2020, 141, 105867

Influence of Y2O3 nanoparticles on microstructures and properties of electrodeposited Ni–W–Y2O3 nanocrystalline coatings. S. Xing, L. Wang, C. Jiang, H. Liu, W. Zhu, V. Ji, Vacuum, 2020, 181, 109665

Improved wear properties of NiTi nanocomposite coating with tailored spatial microstructures by extra adding CeO2 nanoparticles. L. Wang, S. Xing, H. Liu, C. Jiang, V. Ji, Surface and Coatings Technology, 2020, 399, 126119

Loop currents in two-leg ladder cuprates. D. Bounoua, L. Mangin-Thro, J. Jeong, R. Saint-Martin, L. Pinsard-Gaudart, Y. Sidis, P. Bourges, Communications Physics, 2020, 3, 123

Chemical vapor deposition of Cu films from copper(I) cyclopentadienyl triethylphophine: Precursor characteristics and interplay between growth parameters and films morphology. N. Prud'Homme, V. Constantoudis, A. E. Turgambaeva, V. V. Krisyuk, D. Samélor, F. Senocq, C. Vahlas, Thin Solid Films, 2020, 701, 137967

Tight-binding Ising modeling of the interplay between bulk ordering and surface segregation in Pt-Ag nanoalloys. A. Hizi, A. Front, M. Said, F. Berthier, G. Tréglia, C. Mottet, Surface Science, 2020, 700, 121626

Determination of surface mechanical property and residual stress stability for shot-peened SAF2507 duplex stainless steel by in situ X-ray diffraction stress analysis. M. Chen, S. Xing, H. Liu, C. Jiang, K. Zhan, V. Ji, Journal of Materials Research and Technology, 2020, 9, 7644-7654

The deformation and recrystallization behaviour of an Mg-Dy alloy processed by plane strain compression. F. Guerza-Soualah, A. Hanna, H. Azzeddine, A.-L. Helbert, F. Brisset, T. Baudin, D. Bradai, Materials Today Communications, 2020, 24, 101239

Evaluation of Mechanical Behavior and Surface Morphology of Shot-Peened Ti-6Al-4V Alloy. Y. Wen, P. Liu, L. Xie, Z. Wang, L. Wang, W. Lu, C. Jiang, V. Ji, Journal of Materials Engineering and Performance, 2020, 29, 182-190

Analytical modeling and experimental verification of surface roughness in the ultrasonic-assisted ball burnishing of shaft targets. Z. Liu, Q. Dai, J. Deng, Y. Zhang, V. Ji, The International Journal of Advanced Manufacturing Technology, 2020, 107, 3593-3613

Effect of the hot rolling on Goss development and magnetic induction in an advanced soft magnetic Fe–27%Co alloy. B. Nabi, A.-L. Helbert, F. Brisset, T. Waeckerlé, R. Batonnet, T. Baudin, Journal of Alloys and Compounds, 2020, 834, 155149

Analysis of Au-Pd Driving forces via the Effective Site Energy Model: LRO, Antisites and Enthalpy of Permutation. F. Berthier, B. Legrand, J. Phys.: Condens. Matter, 2020, 32, 354001

Effect of TiO2-Nanoparticles on Ni Electrodeposition on Copper Wire. S. Saad, Z. Boumerzoug, A. L. Helbert, F. Brisset, T. Baudin, Metals, 2020, 10

SPS-assisted synthesis of InGaO3(ZnO)m ceramics, and influence of m on the band gap and the thermal conductivity. S. Préaud, C. Byl, F. Brisset, D. Berardan, Journal of the American Ceramic Society, 2020, 103, 3030-3038

Microstructural peculiarities and textural characteristics of Ni–W sheet alloy after accumulative roll-bonding and annealing. S. Koriche, S. Boudekhani-Abbas, H. Azzeddine, T. Baudin, A.-L. Helbert, F. Brisset, Y. A. Betanda, T. Waeckerlé, D. Bradai, SN Applied Sciences, 2020, 2, 650

Impact of rare-earth elements on the corrosion performance of binary magnesium alloys. H. Azzeddine, A. Hanna, A. Dakhouche, L. Rabahi, N. Scharnagl, M. Dopita, F. Brisset, A.-L. Helbert, T. Baudin, Journal of Alloys and Compounds, 2020, 829, 154569

In-situ EBSD investigation of thermal stability of a 316L stainless steel nanocrystallized by Surface Mechanical Attrition Treatment. Y. Wu, Z. Sun, F. Brisset, T. Baudin, A.-L. Helbert, D. Retraint, Materials Letters, 2020, 263, 127249

An investigation of the stored energy and thermal stability in a Cu–Ni–Si alloy processed by high-pressure torsion. H. Azzeddine, Y. Bourezg, A. Khereddine, T. Baudin, A.-L. Helbert, F. Brisset, M. Kawasaki, D. Bradai, T. Langdon, Philosophical Magazine, 2020, 100, 688-712

Effect of shot peening on residual stress distribution and tribological behaviors of 17Cr2Ni2MoVNb steel. Y. Zhang, F. Lai, S. Qu, V. Ji, H. Liu, X. Li, Surface and Coatings Technology, 2020, 386, 125497

Atomic-scale investigation of the interface precipitation in a TiB2 nanoparticles reinforced Al–Zn–Mg–Cu matrix composite. Y. Ma, A. Addad, G. Ji, M.-X. Zhang, W. Lefebvre, Z. Chen, V. Ji, Acta Materialia, 2020, 185, 287-299

Morphological, structural, optical, and electrical study of nanostructured thin films: Charge transport mechanism of p-type Co3O4. A. Miquelot, M. Despotopoulou, C. Vahlas, C. Villeneuve, N. Dragoe, N. Prud'Homme, O. Debieu, Materials Chemistry and Physics, 2020, 240, 122059

2019

Compromise between magnetic shielding and mechanical strength of thin Al/Steel/Al sandwiches produced by cold roll bonding: Experimental and numerical approaches. P. Clérico, X. Mininger, L. Prévond, T. Baudin, A.-L. Helbert, Journal of Alloys and Compounds, 2019, 798, 67-81

Cr cluster characterization in a Cu-Cr-Zr alloy after ECAP processing and aging using SANS and HAADF-STEM. K. Abib, H. Azzeddine, B. Alili, L. Litynska-Dobrzynska, A.-L. Helbert, T. Baudin, P. Jegou, M.-H. Mathon, P. Zieba, D. Bradai, Kovové Materialy-Metallic Materials, 2019, 57, 121-129

Magnetic Shielding at Low Frequencies: Application for an Aluminum/Steel Composite Elaborated by Accumulative Roll Bonding. K. Verstraete, L. Prévond, A.-L. Helbert, T. Baudin, Advanced Engineering Materials, 2019, 21, 1800967

Modification of fluorine-doped tin oxide surface: Optimization of the electrochemical grafting of diazonium salt. V. Bui-Thi-Tuyet, C. Cannizzo, C. Legros, M. Andrieux, A. Chaussé, Surfaces and Interfaces, 2019, 15, 110-116

Stress-induced optical waveguides written by an ultrafast laser in Nd3+, Y3+ co-doped SrF2 crystals. B. H. Babu, C. Lyu, T. Billotte, D. Pallares-Aldeiturriaga, B. Poumellec, J. M. Lopez-Higuera, X.-T. Hao, M. Lancry, Applied Optics, 2019, 58, 984-990

Relaxation study of pre-densified silica glasses under 2.5 MeV electron irradiation. N. Ollier, M. Lancry, C. Martinet, V. Martinez, S. Le Floch, D. Neuville, Scientific Reports, 2019, 9, 1227

Unique silica polymorph obtained under electron irradiation. I. Reghioua, M. Lancry, O. Cavani, S. L. Floch, D. R. Neuville, N. Ollier, Applied Physics Letters, 2019, 115, 251101

Spectral dependence of femtosecond laser induced circular optical properties in silica. J. Tian, R. Li, S. H. Yoo, B. Poumellec, E. Garcia-Caurel, R. Ossikovski, M. Stchakovsky, C. Eypert, J. Canning, M. Lancry, OSA Continuum, 2019, 2, 1233-1241

BAC activation by thermal quenching in bismuth/erbium codoped fiber. S. Wei, Y. Luo, D. Fan, G. Xiao, Y. Chu, B. Zhang, Y. Tian, M. Talal, M. Lancry, G.-D. Peng, Optics Letters, 2019, 44, 1872-1875

Calcium silicate and fluorosilicate optical fibers for high energy laser applications. M. Cavillon, P. Dragic, C. Kucera, T. W. Hawkins, J. Ballato, Opt. Mater. Express, 2019, 9, 2147-2158

Recrystallization and grain growth at the interface of a bimetallic colaminated strip composed of two different Fe-Ni alloys. J. Poncelet, T. Baudin, M. D. Oliveira, T. Waeckerlé, Y. Ateba-Betanda, F. Brisset, A. Helbert, Journal of Physics: Conference Series, 2019, 1270, 012024

Temperature-Driven Multiferroic Phase Transitions and Structural Instability Evolution in Lanthanum-Substituted Bismuth Ferrite. J. Wei, C.-F. Wu, T.-T. Yang, R. Haumont, Z.-X. Cheng, Journal of Physical Chemistry C, 2019, 123, 4457-4468

Interaction of low-energy electrons with surface polarity near ferroelastic domain boundaries. Z. Zhao, N. Barrett, Q. Wu, D. Maritinotti, R. Haumont, M. Pellen, E.-H.-K. Saije, Physical Review Materials, 2019, 3, 043601

Overview of high temperature fibre Bragg gratings and potential improvement using highly doped aluminosilicate glass optical fibres. M. Cavillon, M. Lancry, B. Poumellec, Y. Wang, J. Canning, K. Cook, T. Hawkins, P. Dragic, J. Ballato, Journal of Physics: Photonics, 2019, 1, 042001

Structural, Half-metallic and Magnetic Properties of the Imperfect Pb2FeReO6 Containing Eight Different Inherent Defects. Y. Zhang, H.-X. Chen, L. Duan, L. Ni, J.-B. Fan, J. Wang, G.-T. Ci, V. Ji, Journal of Magnetics, 2019, 24 (3), 413-422

Microstructural Evolutions and Mechanical Properties of Drawn Medium Carbon Steel Wire. M. C. Nebbar, M. Zidani, T. Djimaoui, T. Abid, H. Farh, T. Ziar, A.-L. Helbert, F. Brisset, T. Baudin, International Journal of Engineering Research in Africa, 2019, 41, 1-7

Texture analysis of welded 304L pipeline steel. S. Hamza, Z. Boumerzoug, A.-L. Helbert, F. Brisset, T. Baudin, Journal of Metals, Materials and Minerals, 2019, 29 (3), 32-41

Thermal Stability of an Mg–Nd Alloy Processed by High-Pressure Torsion. S. Tighiouaret, R. Lachhab, A. Hanna, H. Azzeddine, Y. Huang, T. Baudin, A.-L. Helbert, F. Brisset, D. Bradai, T. G. Langdon, Advanced Engineering Materials, 2019, 21, 1900801

Optimization of Microstructural Evolution during Laser Cladding of Ni Based Powder on GCI Glass Molds. F. Bourahima, A. L. Helbert, V. Ji, M. Rege, A. Courteaux, F. Brisset, T. Baudin, Key Engineering Materials, 2019, 813, 185-190

Origin of the {111}〈112〉 Cold Rolling Texture Development in a Soft Magnetic Fe-27%Co Alloy. B. Nabi, A.-L. Helbert, H. Azzeddine, D. Bradai, F. Brisset, T. Waeckerlé, V. Aubin, T. Baudin, Journal of Materials Engineering and Performance, 2019, 28, 3767-3776

Surface layer characteristics of SAF2507 duplex stainless steel treated by stress shot peening. M. Chen, C. Jiang, Z. Xu, V. Ji, Applied Surface Science, 2019, 481, 226-233

Roles of growth mechanisms of Ni deposits on corrosion behaviors of NixAlyTi composite coatings. Y. Zhao, S. Xing, L. Wang, Y. Sun, H. Liu, K. Zhan, C. Jiang, V. Ji, W. Li, Applied Surface Science, 2019, 492, 177-188

Surface layer microstructures and wear properties modifications of Mg-8Gd-3Y alloy treated by shot peening. H. Liu, C. Jiang, M. Chen, L. Wang, V. Ji, Materials Characterization, 2019, 158, 109952

Magnetic and atomic short range order in Fe1-xCrx alloys. I. Mirebeau, V. Pierron-Bohnes, C. Decorse, E. Rivière, C.-C. Fu, K. Li, G. Parette, N. Martin, Physical Review B, 2019, 100, 224406

TiO2 nanotree films for the production of green H2 by solar water splitting: From microstructural and optical characteristics to the photocatalytic properties. A. Miquelot, O. Debieu, V. Rouessac, C. Villeneuve, N. Prud'Homme, J. Cure, V. Constantoudis, G. Papavieros, S. Roualdes, C. Vahlas, Applied Surface Science, 2019, 494, 1127-1137

Effect of alkali cations on the photomagnetic behavior of CoFe Prussian blue analogue nanoparticles embedded in ordered mesoporous silica. L. Altenschmidt, G. Fornasieri, E. Rivière, F. Brisset, R. Saint-Martin, A. Bleuzen, Comptes Rendus Chimie, 2019, 22, 508-515

A new powder metallurgy routine to fabricate TiB2/Al–Zn–Mg–Cu nanocomposites based on composite powders with pre-embedded nanoparticles. Q. Yang, Y. Ma, Z. Chen, G. Ji, M.-L. Wang, S.-Y. Zhong, Y. Wu, V. Ji, H.-W. Wang, Materialia, 2019, 8, 100458

Effect of scandia content on the hot corrosion behavior of Sc2O3 and Y2O3 co-doped ZrO2 in Na2SO4 + V2O5 molten salts at 1000 °C. C. Chen, T. Liang, Y. Guo, X. Chen, Q. Man, X. Zhang, J. Zeng, V. Ji, Corrosion Science, 2019, 158, 108094

Crystalline growth under electric field: Toward a new route to design domain modulated-structures. Case of CaTiO3. M. Pellen, R. Saint-Martin, R. Haumont, Journal of Crystal Growth, 2019, 525, 125190

Ab initio thermodynamics of carbon segregation on dislocation cores in bcc iron. B. Lüthi, F. Berthier, L. Ventelon, B. Legrand, D. Rodney, F. Willaime, Modelling and Simulation in Materials Science and Engineering, 2019, 27, 074002

Lattice Dynamics Study of Thermoelectric Oxychalcogenide BiCuChO (Ch = Se, S). R. Viennois, P. Hermet, M. Beaudhuin, J.-L. Bantignies, D. Maurin, S. Pailhès, M. Fernandez-Diaz, M. Koza, C. Barreteau, N. Dragoe, D. Bérardan, The Journal of Physical Chemistry C, 2019, 123, 16046-16057

Magnetoelastic excitation spectrum in the rare-earth pyrochlore Tb2Ti2O7. M. Ruminy, S. Guitteny, J. Robert, L.-P. Regnault, M. Boehm, P. Steffens, H. Mutka, J. Ollivier, U. Stuhr, J.-S. White, B. Roessli, L. Bovo, C. Decorse, M.-K. Haas, R.-J. Cava, I. Mirebeau, M. Kenzelmann, S. Petit, T. Fennell, Physical Review B, 2019, 99, 224431

Probing NaCl at High Pressure through Optical Studies and Ab Initio Calculations. B. Langerome, M. Verseils, F. Capitani, J.-B. Brubach, E. Amzallag, E. Calandrini, J. Creuze, P. Roy, The Journal of Physical Chemistry C, 2019, 123, 15724-15728

Zirconia layers: Structure, residual stress and fracture strength. J. Djuidje-Dzumgam, C. Berdin, M. Andrieux, P. Ribot, Engineering Fracture mechanics, 2019, 214, 378-389

Towards the synthesis of mixed oxides with controlled stoichiometry from Prussian blue analogues. V. Trannoy, A. Bordage, J. Dezalay, R. Saint-Martin, E. Rivière, P. Beaunier, C. Baumier, C. La Fontaine, G. Fornasieri, A. Bleuzen, CrystEngComm, 2019, 21, 3634-3643

Prediction of the terminations and Miller planes of the tetragonal zirconia thin films as a gate dielectric layer in integrated-circuit industry. Y. Zhang, H.-X. Chen, L. Duan, L. Ni, J.-B. Fan, Z. Wang, V. Ji, Surface and Interface Analysis, 2019, 51, 774-782

Studying the insulating characters of cubic ZrO2 slabs with nine terminations within three lower index Miller planes (001), (110) and (111). Y. Zhang, H.-X. Chen, L. Duan, J.-B. Fan, L. Ni, Z. Wang, H. Li, V. Ji, Microelectronic Engineering, 2019, 213, 77-85

Influences of Al and Ti particles on microstructure, internal stress and property of Ni composite coatings. Y. Zhao, L. Wang, Y. Sun, H. Liu, C. Jiang, V. Ji, W. Li, Journal of Alloys and Compounds, 2019, 793, 314-325

Femtosecond Laser-Induced Crystallization in Glasses: Growth Dynamics for Orientable Nanostructure and Nanocrystallization. J. Cao, M. Lancry, F. Brisset, L. Mazerolles, R. Saint-Martin, B. Poumellec, Crystal Growth & Design, 2019, 19, 2189-2205

Charge compensation mechanisms in Li‐substituted high‐entropy oxides and influence on Li superionic conductivity. N. Osenciat, D. Berardan, D. Dragoe, B. Léridon, S. Holé, A. K. Meena, S. Franger, N. Dragoe, Journal of the American Ceramic Society, 2019, 102, 6156-6162

Cube orientation bands observed in largely deformed Al-Sc alloys containing shearable precipitates. C.-Y. Dan, Z. Chen, G. Ji, S.-Y. Zhong, J. Li, X.-R. Li, F. Brisset, G.-A. Sun, H.-W. Wang, V. Ji, Scripta Materialia, 2019, 166, 139-143

Long-range magnetic ordering in rocksalt-type high-entropy oxides. J.-S. Polo, T. Takayama, D. Bérardan, A. Hoser, M. Reehuis, H. Takagi, N. Dragoe, Applied Physics Letters, 2019, 114, 122401

Study of the microstructure and texture heterogeneities of Fe-48wt%Ni alloy severely deformed by equal channel angular pressing. R. Lachhab, M. A. Rekik, H. Azzeddine, T. Baudin, A.-L. Helbert, F. Brisset, M. Khitouni, Journal of Materials Science, 2019, 54, 4354-4365

Evaluating the textural and mechanical properties of an Mg-Dy alloy processed by high-pressure torsion. A. Hanna, H. Azzeddine, R. Lachhab, T. Baudin, A.-L. Helbert, F. Brisset, Y. Huang, D. Bradai, T. G. Langdon, Journal of Alloys and Compounds, 2019, 778, 61-71

Investigation of microstructure and texture evolution of a Mg/Al laminated composite elaborated by accumulative roll bonding. W. Habila, H. Azzeddine, B. Mehdi, K. Tirsatine, T. Baudin, A.-L. Helbert, F. Brisset, S. Gautrot, M.-H. Mathon, D. Bradai, Materials Characterization, 2019, 147, 242-252

Texture control of 316L parts by modulation of the melt pool morphology in selective laser melting. O. Andreau, I. Koutiri, P. Peyre, J.-D. Penot, N. Saintier, E. Pessard, T. De Terris, C. Dupuy, T. Baudin, Journal of Materials Processing Technology, 2019, 264, 21-31

On the evaluation of dislocation densities in pure tantalum from EBSD orientation data. C. Fressengeas, B. Beausir, C. Kerisit, A.-L. Helbert, T. Baudin, F. Brisset, M.-H. Mathon, R. Besnard, N. Bozzolo, Matériaux & Techniques, 2019, 106, 604

Modulated magnetic structure in 57Fe doped orthorhombic YbMnO3: A Mossbauer study. M. Duttine, A. Wattiaux, F. Balima, C. Decorse, H. Moutaabbid, D.-H. Ryan, P. Bonville, AIP Advances, 2019, 9, 035008

Study of femtosecond laser writing in the bulk of Nd3+, Y3+ co-doped CaF2 crystals. B. H. Babu, T. Billotte, C. Lyu, B. Poumellec, M. Lancry, X.-T. Hao, OSA Continuum, 2019, 2, 151-161

Order-disorder or phase-separation transition: Analysis of the Au-Pd system by the effective site energy model. F. Berthier, J. Creuze, T. Gabard, B. Legrand, M.-C. Marinica, C. Mottet, Physical Review B, 2019, 99, 014108

Single crystal growth of BaZrO3 from the melt at 2700 °C using optical floating zone technique and growth prospects from BaB2O4 flux at 1350 °C. C. Xin, P. Veber, M. Guennou, C. Toulouse, N. Valle, M. Ciomaga Hatnean, G. Balakrishnan, R. Haumont, R. Saint-Martin, M. Velasquez, A. Maillard, D. Rytz, M. Josse, M. Maglione, J. Kreisel, CrystEngComm, 2019, 21, 502-512

Laser cladding of Ni based powder on a Cu-Ni-Al glassmold: Influence of the process parameters on bonding quality and coating geometry. F. Bourahima, A.-L. Helbert, M. Rege, V. Ji, D. Solas, T. Baudin, Journal of Alloys and Compounds, 2019, 771, 1018-1028

Investigation on microstructure and properties of Al18B4O33 whisker reinforced Al-Mg-Si matrix composite after shot peening. H. Liu, M. Chen, L. Wang, K. Zhan, V. Ji, C. Jiang, Vacuum, 2019, 160, 303-310

Experimental study of the mechanisms of nanoparticle influencing the fatigue crack growth in an in-situ TiB2/Al-Zn-Mg-Cu composite. Y. Ma, J. Geng, Z. Chen, M. Wang, D. Chen, G. Ji, V. Ji, H. Wang, Engineering Fracture Mechanics, 2019, 207, 23–35

Experimental study on macro- and microstress state, microstructural evolution of austenitic and ferritic steel processed by shot peening. M. Chen, C. Jiang, Z. Xu, K. Zhan, V. Ji, Surface and Coatings Technology, 2019, 359, 511-519

Studies by X-ray Absorption Spectrometry (XAS) of the Local Order at the Zironium Threshold in an alpha-Al2O3 Layer Developed by Oxidation at High Temperature on an Alloy FeCr22Al5. M.-K. Loudjani, International Journal of Thin Films Science and Technology, 2019, 8, 1-4

2018

Low cycle fatigue of 316L stainless steel processed by surface mechanical attrition treatment (SMAT). Z. Sun, J. Zhou, D. Retraint, T. Baudin, A.-L. Helbert, F. Brisset, P. Kanouté, MATEC Web Conf., 2018, 165

Texture, microstructure and mechanical properties evolution in Fe-x (x = 36 and 48 wt.%) Ni alloy after accumulative roll bonding. S. Boudekhani-Abbas, K. Tirsatine, H. Azzeddine, B. Alili, A. L. Helbert, F. Brisset, T. Baudin, D. Bradai, IOP Conference Series: Materials Science and Engineering, 2018, 375, 012034

Electric field effects during solidification of the ternary oxide eutectic Al2O3-YAG-ZrO2. M. Cherif, P. Hicher, O. Benamara, K. Lebbou, R. Haumont, T. Duffar, Crystal Research and Technology, 2018, 53, 1700251

Oxygen evolution reaction on perovskites: A multieffect descriptor study combining experimental and theoretical methods. X. Cheng, E. Fabbri, Y. Yamashita, I.-E. Castelli, R. Haumont, I. Puente-Orench, T.-J. Schmidt, ACS Catalysis, 2018, 8, 9567-9578

On the groove pressing of Ni-W alloy: microstructure, texture and mechanical properties evolution. S. Koriche, S. Boudekhani-Abbas, H. Azzeddine, K. Abib, A.-L. Helbert, F. Brisset, T. Baudin, D. Bradai, Kovové Materialy-Metallic Materials, 2018, 56, 313-323

Strain-induced dissolution of Y-Ti-O nano-oxides in a consolidated ferritic oxide dispersion strengthened (ODS) steel. B. Hary, R. Logé, J. Ribis, M.-H. Mathon, M. Van Der Meer, T. Baudin, Y. De Carlan, Materialia, 2018, 4, 444-448

Microstructure, texture and mechanical properties of Ni-W alloy after accumulative roll bonding. S. Boudekhani-Abbas, H. Azzeddine, K. Tirsatine, T. Baudin, A.-L. Helbert, F. Brisset, B. Alili, D. Bradai, Journal of Materials Engineering and Performance, 2018, 27, 5561-5570

Effet du traitement thermique sur la texture cristallographique de l’aluminium 1050. N. Chérifi-Bennadji, Z. Boumerzoug, T. Baudin, Courrier du Savoir, 2018, 26, 443-448

Technique ECAP - Aspects théoriques et applicatifs. F. Hadj-Larbi, B. Alili, D. Bradai, A.-L. Helbert, T. Baudin, Les Techniques de l’Ingénieur, 2018, M3045, 1-13

Texture and microhardness of Mg-Rare Earth (Nd and Ce) alloys processed by high-pressure torsion. Y.-I. Bourezg, H. Azzeddine, T. Baudin, A.-L. Helbert, Y. Huang, D. Bradai, T.-G. Langdon, Materials Science & Engineering A, 2018, 724, 477-485

Probing multi-spinon excitations outside of the two-spinon continuum in the antiferromagnetic spin chain cuprate Sr2CuO3. J. Schlappa, U. Kumar, K.-J. Zhou, S. Singh, M. Mourigal, V.-N. Strocov, A. Revcolevschi, L. Patthey, H.-M. Rønnow, S. Johnston, T. Schmitt, Nature Communications, 2018, 9, 5394

Femtosecond laser-induced circular dichroism in silica: Dependence on energy and focusing depth. J. Tian, R. Desmarchelier, B. Poumellec, M. Lancry, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2018, 435, 258-262

Single crystal growth, optical absorption and luminescence properties under VUV-UV synchrotron excitation of type III Ce3+:KGd(PO3)4, a promising scintillator material. I. Adell, R. M. Solé, M. C. Pujol, M. Lancry, N. Ollier, M. Aguiló, F. Díaz, Scientific Reports, 2018, 8, 11002

Magneto-absorption spectra of hydrogen-like yellow exciton series in cuprous oxide: excitons in strong magnetic fields. S. Artyukhin, D. Fishman, C. Faugeras, M. Potemski, A. Revcolevschi, M. Mostovoy, P. H.-M. Van Loosdrecht, Scientific Reports, 2018, 8, 7818

Charge and bonding in CuGeO3 nanorods. K. R. O' Neal, A. Al Wanish, Z.-Q. Li, G. Dhalenne, A. Revcolevschi, X.-T. Chen, J. L. Musfeld, Nano Letters, 2018, 18, 3428-3434

Atomic-layer-resolved composition and electronic structure of the cuprate Bi2Sr2CaCu2O8+δ from soft x-ray standing-wave photoemission. C.-T. Kuo, S. Lin, G. Conti, S.-T. Pi, L. Moreschini, A. Bostwick, J. Meyer-Ilse, E. Gullikson, J. B. Kortright, S. Nemsak, J. E. Rault, P. Le Fèvre, F. Bertran, A. F. Santander-Syro, I. A. Vartanynats, W. E. Pickett, R. Saint-Martin, A. Taleb-Ibrahimi, C. S. Fadley, Physical Review B, 2018, 98, 155133

Residual stress and microstructure evolutions of SAF 2507 duplex stainless steel after shot peening. M. Chen, H. Liu, L. Wang, Z. Xu, V. Ji, C. Jiang, Applied Surface Science, 2018, 459, 155-163

Evaluation of LaAlO3 as top coat material for thermal barrier coatings. N. Vourdas, E. Marathoniti, P.-K. Pandis, C. Argirusis, G. Sourkouni, C. Legros, S. Mirza, V.-N. Stathopoulos, Transactions of Nonferrous Metals Society of China, 2018, 28, 1582-1592

Angle resolved photoemission spectroscopy study of the spin-charge separation in the strongly correlated cuprates SrCuO2 and Sr2CuO3 with S=0 impurities. D. Bounoua, R. Saint-Martin, J. Dai, T. Rodel, S. Sengupta, E. Franzeskakis, F. Bertran, P. Lefevre, F. Fortuna, A. Santander-Syro, L. Pinsard-Gaudart, Journal of Electron Spectroscopy and Related Phenomena, 2018, 225, 49-54

Spin textures induced by quenched disorder in a reentrant spin glass: Vortices versus ‘frustrated’ skyrmions. I. Mirebeau, N. Martin, M. Deutsch, L. J. Bannenberg, C. Pappas, G. Chaboussant, R. Cubitt, C. Decorse, A. O. Leonov, Physical Review B, 2018, 98, 014420

Equilibrium Au-Pd(100) Surface Structures Under CO Pressure : Energetic Stabilities and Phase Diagrams. I. C. Oguz, T. Mineva, J. Creuze, H. Guesmi, The Journal of Physical Chemistry C, 2018, 122, 18922-18932

Realization of n-type and enhanced thermoelectric performance of p-type BiCuSeO by controlled iron incorporation. L. Pan, Y. Lang, L. Zhao, D. Berardan, E. Amzallag, C. Xu, Y. Gu, C. Chen, L.-D. Zhao, X. Shen, Y. Lyu, C. Lu, Y. Wang, Journal of Materials Chemistry A, 2018, 6, 13340-13349

An EBSD analysis of Fe-36%Ni alloy processed by HPT at ambient and a warm temperature. K. Tirsatine, H. Azzeddine, Y. Huang, T. Baudin, A.-L. Helbert, F. Brisset, D. Bradai, T.-G. Langdon, Journal of Alloys and Compounds, 2018, 753, 46-53

Models, Methods and Measurements of Thin Films Resistivities of Ni/Cu Bi layers and Ni/Pd/Cu Tri layers Films. M.-K. Loudjani, C. Sella, International Journal of Thin Films Science and Technology, 2018, 7, 67-71

Investigations into the Surface Strain/Stress State in a Single-Crystal Superalloy via XRD Characterization. H. Duan, L. Qin, Y. Pei, S. Li, L.-D. Zhao, V. Ji, S. Gong, Metals, 2018, 8, 376

A comparison study of the Born effective charges and dielectric properties of the cubic, tetragonal, monoclinic, ortho-I, ortho-II and ortho-III phases of zirconia. Y. Zhang, H.-X. Chen, L. Duan, J.-B. Fan, L. Ni, V. Ji, Solid State Sciences, 2018, 81, 58-65

Investigation on the thermostability of residual stress and microstructure in shot peened SAF 2507 duplex stainless steel. M. Chen, H. Liu, L. Wang, Z. Xu, V. Ji, C. Jiang, Vacuum, 2018, 153, 145-153

Investigation on microstructure and properties of electrodeposited Ni-Ti-CeO2 composite coating. L. Wang, Y. Zhao, C. Jiang, V. Ji, M. Chen, K. Zhan, F. Moreira, Journal of Alloys and Compounds, 2018, 754, 93-104

Microstructure evolution and hot corrosion mechanisms of Ba2REAlO5 (RE = Yb, Er, Dy) exposed to V2O5 + Na2SO4 molten salt. L. Guo, C. Zhang, Q. He, J. Yu, Z. Yan, F. Ye, C. Dan, V. Ji, Journal of the European Ceramic Society, 2018, 38, 3555-3563

Simultaneously increasing strength and ductility of nanoparticles reinforced Al composites via accumulative orthogonal extrusion process. J. Liu, Z. Chen, F. Zhang, G. Ji, M. Wang, Y. Ma, V. Ji, S. Zhong, Y. Wu, H. Wang, Materials Research Letters, 2018, 6, 406-412

Triphenylamine–Thienothiophene Organic Charge‐Transport Molecular Materials: Effect of Substitution Pattern on their Thermal, Photoelectrochemical, and Photovoltaic Properties. T. H. Le, Q. Dao, M. Nghiêm, S. Péralta, R. Guillot, Q. N. Pham, A. Fujii, M. Ozaki, F. Goubard, T. Bui, Chemistry – An Asian Journal, 2018, 18, 1302-1311

Ab initio study for the IR spectroscopy of PbTiO3 and PbZrO3, primary blocks of PbZr1-xTixO3. Y. Peperstraete, E. Amzallag, R. Tetot, P. Roy, Journal of Physics: Condensed Matter, 2018, 30, 215702

EPR reversible signature of self-trapped holes in fictive temperature-treated silica glass. M. Lancry, N. Ollier, B. Babu, C. Herrero, B. Poumellec, Journal of Applied Physics, 2018, 123, 113101

Pulse energy dependence of refractive index change in lithium niobium silicate glass during femtosecond laser direct writing. J. Cao, B. Poumellec, F. Brisset, M. Lancry, Optics Express, 2018, 26, 7460-7474

A comparison study of the structural and mechanical properties of cubic, tetragonal, monoclinic, and three orthorhombic phases of ZrO2. Y. Zhang, H.-X. Chen, L. Duan, J.-B. Fan, L. Ni, V. Ji, Journal of Alloys and Compounds, 2018, 749, 283-292

Synthesis and transport properties of p-type lead-free AgSnmSbSe2Tem thermoelectric systems. S. Figueroa-Millon, I. Alvarez-Serrano, D. Berardan, A. Galdamez, Materials Chemistry and Physics, 2018, 211, 321

Finite size effect on the magnetic excitations spectra and magnetic heat conduction of the quasi- one dimensional spin chains system SrCuO2. D. Bounoua, R. Saint-Martin, S. Petit, F. Bourdarot, L. Pinsard-Gaudart, Physica B: Condensed Matter, 2018, 536, 323-326

Cold rolling texture evolution of TiB2 particle reinforced Al-based composites by Neutron Diffraction and EBSD analysis. C.-Y. Dan, Z. Chen, M.-H. Mathon, G. Ji, L.-W. Li, Y. Wu, F. Brisset, L. Guo, H.-W. Wang, V. Ji, Materials Characterization, 2018, 136, 293-301

Investigation on surface layer characteristics of shot peened graphene reinforced Al composite by X-ray diffraction method. K. Zhan, Y. Wu, J. Li, B. Zhao, Y. Yan, L. Xie, L. Wang, V. Ji, Applied Surface Science, 2018, 435, 1257-1264

Hot corrosion behavior of TiO2 doped, Yb2O3 stabilized zirconia exposed to V2O5 + Na2SO4 molten salt at 700–1000°C. L. Guo, Z. Yan, J. Yu, C. Zhang, M. Li, F. Ye, V. Ji, Ceramics International, 2018, 44, 261-268

Evaluation of the residual stress and microstructure character in SAF 2507 duplex stainless steel after multiple shot peening process. M. Chen, H. Liu, L. Wang, C. Wang, K. Zhu, Z. Xu, C. Jiang, V. Ji, Surface and Coatings Technology, 2018, 344, 132-140

Microstructural Evolution and Texture Analysis in a Thermomechanically Processed Low SFE Super-Austenitic Steel (Alloy-28). N. Eftekhari, A. Zarei-Hanzaki, A. Shamsolhodaei, A.-L. Helbert, T. Baudin, Advanced Engineering Materials, 2018, 20, 1700928

Multiscale modeling of a low magnetostrictive Fe-27wt%Co-0.5wt%Cr alloy. M. Savary, O. Hubert, A.-L. Helbert, T. Baudin, R. Batonnet, T. Waeckerlé, AIP Advances, 2018, 8, 056117

Magnetostrictive and magnetic effects in Fe-27%Co laminations. M. Savary, O. Hubert, A.-L. Helbert, T. Baudin, T. Waeckerlé, AIP Advances, 2018, 8, 047711

Accumulative roll bonding at room temperature of a bi-metallic AA5754/AA6061 composite: Impact of strain path on microstructure, texture and mechanical properties. K. Verstraete, H. Azzeddine, A.-L. Helbert, F. Brisset, D. Bradai, T. Baudin, Advanced Engineering Materials, 2018, 20, 1700285

Superconductivity, pseudo-gap, and stripe correlations in high-Tc cuprates. Z. Zhang, S. Denis, B. W. Lebert, F. Bertran, P. Le Fèvre, A. Taleb-Ibrahimi, J.-P. Castellan, D. L. Bolloc'H, V. L.-R. Jacques, Y. Sidis, B. Baptiste, C. Decorse, P. Berthet, L. Perfetti, M. D'Astuto, Physica B: Condensed Matter, 2018, 536, 747-751

Direct measurement of the surface energy of bimetallic nanoparticles: Evidence of Vegard’s rule-like dependence. A. Chmielewski, J. Nelayah, H. Amara, J. Creuze, D. Alloyeau, G. Wang, C. Ricolleau, Physical Review Letters, 2018, 120, 025901

2017

Microstructure and Microtexture Evolution of Invar Alloy after Cross Accumulative Roll Bonding (CARB) Compared to ARB. K. Tirsatine, H. Azzeddine, T. Baudin, A. L. Helbert, F. Brisset, D. Bradai, Materials Science Forum, 2017, 879, 744-749

Texture Gradient through Thickness of a Cross Roll-Bonded AA5754/AA6061 Aluminum Composite. K. Verstraete, A. L. Helbert, F. Brisset, T. Baudin, Materials Science Forum, 2017, 879, 2038-2043

Surface layer characteristics of CNT/Al–Mg–Si alloy composites treated by stress peening. K. Zhu, C. Jiang, V. Ji, Surface and Coatings Technology, 2017, 317, 10-16

Dependence of the voids-fiber Bragg grating radiation response on temperature, dose and dose-rate. A. Morana, S. Girard, E. Marin, M. Lancry, J. Grelin, C. Marcandella, P. Paillet, A. Boukenter, Y. Ouerdane, IEEE Transactions on Nuclear Science, 2017

Femtosecond laser-induced circular dichroism in silica: Dependence on energy and focusing depth. J. Tian, R. Desmarchelier, B. Poumellec, M. Lancry, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2017

Femtosecond laser processing induced low loss waveguides in multicomponent glasses. B. H. Babu, M. Niu, T. Billotte, P. Bi, F. Zheng, B. Poumellec, M. Lancry, X.-T. Hao, Optical Materials Express, 2017, 7, 3580-3590

Study of femtosecond laser-induced circular optical properties in silica by Mueller matrix spectropolarimetry. J. Tian, M. Lancry, S. H. Yoo, E. Garcia-Caurel, R. Ossikovski, B. Poumellec, Optics letters, 2017, 42, 4103-4106

Tunability of form birefringence induced by femtosecond laser irradiation in anion doped silica glass. Y. Shimotsuma, S. Kubota, A. Murata, T. Kurita, M. Sakakura, K. Miura, M. Lancry, B. Poumellec, Journal of the American Ceramic Society, 2017, 100, 3912

Abnormal elemental redistribution in silicate glasses irradiated by ultrafast laser. X. Zhang, X. He, Q. Liu, B. Poumellec, M. Lancry, F. Brisset, Journal of Alloys and Compounds, 2017, 727, 444-448

Impact of glass density on the green emission and NBOHC formation in silica glass: A combined high pressure and 2.5 MeV electron irradiation. N. Ollier, K. Piven, C. Martinet, T. Billotte, V. Martinez, D. Neuville, M. Lancry, Journal of Non-Crystalline Solids, 2017, 476, 81-86

Radiation hardening of silica glass through fictive temperature reduction. M. Lancry, B. H. Babu, N. Ollier, B. Poumellec, International Journal of Applied Glass Science, 2017, 8, 285-290

Chiroptical properties photo-induced by femtosecond laser irradiation in silica glass. R. Desmarchelier, M. Lancry, J. Tian, B. Poumellec, Applied Physics Letters, 2017, 110, 021112

Modifications in lithium niobium silicate glass by femtosecond laser direct writing: morphology, crystallization, and nanostructure. J. Cao, L. Mazerolles, M. Lancry, F. Brisset, B. Poumellec, JOSA B, 2017, 34, 160-168

Effect of the shot peening on the deformation of Al alloy component. X. Zhang, K. Liao, V. Ji, H. Chen, L. Hu, Surface Engineering, 2017, 0, 1-8

Room-temperature soft mode and ferroelectric like polarization in SrTiO3 ultrathin films: Infrared and ab initio study. W.-W. Peng, R. Tétot, N. Gang, E. Amzallag, B. Viquin, J.-B. Brubach, P. Roy, Scientific Reports, 2017, 7, 2160

Control of surface potential at polar domain walls in a nonpolar oxide. G. Nataf, M. Guennou, J. Kreisel, R. Haumont, P. Hicher, O. Aktas, L. Tortech, N. Barrett, Physical Review Materials, 2017, 1, 074410

Structural Distortion, Spin-Phonon Coupling, Interband Electronic Transition, and Enhanced Magnetization in Rare-Earth-Substituted Bismuth Ferrite. W. Jie, W. Chunfang, L. Yalong, R. Haumont, B. Dkhil, Inorganic Chemistry, 2017, 56, 8964-8974

Polar nature of stress-induced twin walls in ferroelastic CaTiO3. H. Yokota, S. Niki, R. Haumont, AIP Advances, 2017, 7, 085315

Impurity-induced spin pseudogap in $\mathrm{SrCu}{\mathrm{O}}2$ doped with Mg, Zn, or La. D. Bounoua, R. Saint-Martin, S. Petit, P. Berthet, F. Damay, Y. Sidis, F. Bourdarot, L. Pinsard-Gaudart, Physical Review B, 2017, 95, 224429

Synthesis, Structure, and Magnetic Electrochemical Properties of a Family of Tungstoarsenates Containing Just CoII Centers or Both CoII and FeIII Centers. C. S. Ayingone Mezui, P. De Oliveira, A.-L. Teillout, J. Marrot, P. Berthet, M. Lebrini, I. M. Mbomekallé, Inorg. Chem., 2017, 56, 1999-2012

Effect of different in-chain impurities on the magnetic properties of the spin chain compound SrCuO2 probed by NMR. Y. Utz, F. Hammerath, A. Mohan, C. Hess, S. Singh, D. Bounoua, R. Saint-Martin, L. Pinsard-Gaudart, A. Revcolevschi, B. Büchner, H. J. Grafe, Physical Review B, 2017, 96, 115125

The Roles of Ti Particles in Improving the Corrosion Resistance of Electrochemically Assembled Ni-Ti Composite Coatings. Y. Zhao, L. Wang, Z. Qin, C. Wang, Z. Xu, C. Jiang, V. Ji, CORROSION, 2017, 73, 1107-1118

Structural, electronic, and magnetic properties of double perovskite Pb2FeReO6 thin films with (001) orientation and three possible terminations. Y. Zhang, L. Duan, V. Ji, Surface and Interface Analysis, 2017, 49, 960-966

On the recrystallization and texture of Fe-36%Ni alloy after accumulative roll bonding and annealing at 600°C. K. Tirsatine, H. Azzeddine, T. Baudin, A.-L. Helbert, F. Brisset, D. Bradai, Materials Engineering - Materiálové inžinierstvo (MEMI), 2017, 24, 56-66

Preparation of metallographic specimens for electron backscatter diffraction. A. Zavdoveev, T. Baudin, E. Pashinska, M. Skoryk, Emerging Materials Research, 2017, 6, 260-264

Relaxation path of nanoparticles in an oxygen-enriched ferritic oxide-dispersion-strengthened alloy. M. A. Thual, J. Ribis, T. Baudin, V. Klosek, Y. De Carlan, M. H. Mathon, SCRIPTA MATERIALIA, 2017, 136, 37-40

Neutron diffraction versus EBSD analysis of the texture in Fe-36%Ni alloy after accumulative roll bonding. H. Azzeddine, K. Tirsatine, T. Baudin, A.-L. Helbert, M.-H. Mathon, F. Brisset, D. Bradai, INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2017, 24, 35-44

On the stored energy evolution after accumulative roll-bonding of invar alloy. H. Azzeddine, K. Tirsatine, T. Baudin, M.-H. Mathon, A.-L. Helbert, F. Brisset, D. Bradai, MATERIALS CHEMISTRY AND PHYSICS, 2017, 201, 408-415

Benefits of energetic ion bombardment for tailoring stress and microstructural evolution during growth of Cu thin films. F. Cemin, G. Abadias, T. Minea, C. Furgeaud, F. Brisset, D. Solas, D. Lundin, Acta Materialia, 2017, 141, 120-130

Disorder and Quantum Spin Ice. N. Martin, P. Bonville, E. Lhotel, S. Guitteny, A. Wildes, C. Decorse, M. Ciomaga Hatnean, G. Balakrishnan, I. Mirebeau, S. Petit, Physical Review X, 2017, 7, 041028

Optimisation of microstructure and corrosion resistance of Ni-Ti composite coatings by the addition of CeO2 nanoparticles. L. Wang, M. Chen, H. Liu, C. Jiang, V. Ji, F. Moreira, Surface and Coatings Technology, 2017, 331, 196-205

Structure transformation of Ti films deposited on SiC single crystal substrates. L. Li, Y. Liu, X. Mao, L. Zeng, V. Ji, Materials Characterization, 2017, 134, 64-68

Residual stress and microstructure evolution of shot peened Ni-Al bronze at elevated temperatures. C. Wang, C. Jiang, M. Chen, L. Wang, H. Liu, V. Ji, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 707, 629-635

Hot corrosion behavior of Ba2REAlO5 (RE = Dy, Er, Yb) ceramics by vanadium pentoxide at 900–1000°C. C. Zhang, L. Guo, J. Yu, M. Li, F. Ye, V. Ji, Ceramics International, 2017, 43, 11944-11952

Effects of TiO2 doping on the defect chemistry and thermo-physical properties of Yb2O3 stabilized ZrO2. L. Guo, C. Zhang, L. Xu, M. Li, Q. Wang, F. Ye, C. Dan, V. Ji, Journal of the European Ceramic Society, 2017, 37, 4163-4169

Measurement of Texture Gradient in HeavilyCold-Drawn Pearlitic Wires. A. Jamoneau, D. Solas, J.-H. Schmitt, Advanced Engineering Matérials, 2017, 1700279, 1-8

Effect of different in-chain impurities on the magnetic properties of the spin chain compound SrCuO2 probed by NMR. Y. Utz, F. Hammerath, R. Kraus, T. Ritschel, J. Geck, L. Hozoi, J. Van Den Brink, A. Mohan, C. Hess, K. Karmakar, S. Singh, D. Bounoua, R. Saint-Martin, L. Pinsard-Gaudart, A. Revcolevschi, B. Büchner, H.-J. Grafe, Physical Review B, 2017, 96, 115135

Vibronic coupling and band gap trends in CuGeO3 nanorods. K.-R. O’Neal, A. Al Wahish, Z. Li, P. Chen, J. W. Kim, S.-W. Cheong, G. Dhalenne, A. Revcolevschi, J. Musfeldt, Physical Review B, 2017, 96, 075437

Influence of structural isomerism of amino acid on the crystal growth of ZnO nanoparticles synthetized by polyol methods. C. Byl, A. Gloter, J.-P. Baltaze, D. Berardan, N. Dragoe, Journal of Sol-Gel Science and Technology, 2017, 83, 296

A versatile system for Hall effect measurements at high temperature. M. Gunes, H. Sato, L. Pinsard-Gaudart, D. Berardan, N. Dragoe, Measurement Science and Technology, 2017, 28, 105905

Models of Electric Transport in Bilayer Ni/Cu And in a Tri-layer Ni/Pd/Cu Thin Films. M.-K. Loudjani, C. Sella, International Journal of Thin Films Science and Technology, 2017, 6-N°3, PP-113-116

Ag on a Ni vicinal surface: Coupling Stranski-Krastanov and “magic” heteroepitaxial growth. A. Bellec, Y. Garreau, J. Creuze, A. Vlad, F. Picca, M. Sauvage-Simkin, A. Coati, Physical Review B, 2017, 96, 085414

Influence of the temperature and composition on the crystal structure of the AgBiSe2-AgBiS2 system. S. Mitra, D. Berardan, Crystal Research & Technology, 2017, 52, 1700075

Effective site-energy model: A thermodynamic approach applied to size-mismatched alloys. F. Berthier, J. Creuze, B. Legrand, Physical Review B, 2017, 95, 224102

Microstructure study of cold rolling nanosized in-situ TiB2 particle reinforced Al composites. C.-Y. Dan, Z. Chen, G. Ji, S.-H. Zhong, Y. Wu, F. Brisset, H.-W. Wang, V. Ji, Materials & Design, 2017, 130, 357-365

Calcium-magnesium-alumina-silicate (CMAS) resistance property of BaLn2Ti3O10 (Ln=La, Nd) for thermal barrier coating applications. L. Guo, M. Li, C. Yang, C. Zhang, L. Xu, F. Ye, C. Dan, V. Ji, Ceramics International, 2017, Volume 43, Issue 13, Pages 10521–10527

Hot corrosion behavior of (Gd0.9Sc0.1)2Zr2O7 in V2O5 molten salt at 700–1000 °C. C. Zhang, M. Li, Y. Zhang, L. Guo, J. Dong, F. Ye, L. Li, V. Ji, Ceramics International, 2017, Volume 43, Pages 9041–9046

Surface mechanical property and residual stress of peened nickel-aluminum bronze determined by in-situ X-ray diffraction. C. Wang, C. Jiang, Y. Zhao, M. Chen, V. Ji, Applied Surface Science, 2017, Volume 420, Pages 28–33

Surface layer characteristics of CNT/Al–Mg–Si alloy composites treated by stress peening. K. Zhu, C. Jiang, V. Ji, Surface and Coatings Technology, 2017, Volume 317, Pages 10–16

Field-induced phase diagram of the XY pyrochlore antiferromagnet Er2Ti2O7. E. Lhotel, J. Robert, E. Ressouche, F. Damay, I. Mirebeau, J. Ollivier, H. Mutka, P. Dalmas De Réotier, A. Yaouanc, C. Marin, C. Decorse, S. Petit, Physical Review B, 2017, 95, 134426

Spin pseudogap in the S=1/2 chain material Sr2CuO3 with impurities. G. Simutis, S. Gvasaliya, N.-S. Beesetty, T. Yoshida, J. Robert, S. Petit, A.-I. Kolesnikov, M.-B. Stone, F. Bourdarot, H.-C. Walker, D.-T. Adroja, O. Sobolev, C. Hess, T. Masuda, A. Revcolevschi, B. Büchner, A. Zheludev, Physical Review B, 2017, 95, 054409

Controlled Jahn-Teller distortion in (MgCoNiCuZn)O-based high entropy oxides. D. Berardan, A.-K. Meena, S. Franger, C. Herrero, N. Dragoe, Journal of Alloys and Compounds, 2017, 704, 693-700

Thermal stability of residual stresses and work hardening of shot peened tungsten cemented carbide. C. Wang, C. Jiang, V. Ji, Journal of Materials Processing Technology, 2017, 240, 98-103

Estimation of microstructure and corrosion properties of peened nickel aluminum bronze. C. Wang, C. Jiang, Z. Chai, M. Chen, L. Wang, V. Ji, Surface and Coatings Technology, 2017, 313, 136-142

Double Vibronic process in the quantum spin ice candidate Tb2Ti2O7 revealed by terahertz spectroscopy. E. Constable, R. Ballou, J. Robert, C. Decorse, J.-B. Brubach, P. Roy, E. Lhotel, L. Del-Rey, V. Simonet, S. Petit, S. Debrion, Physical Review B, 2017, 95, 020415(R)

Experimental study of microstructure changes due to low cycle fatigue of a steel nanocrystallised by Surface Mechanical Attrition Treatment (SMAT). Z. Sun, D. Retraint, T. Baudin, A.-L. Helbert, F. Brisset, M. Chemkhi, J. Zhou, P. Kanoute, Materials Characterization, 2017, 124, 117-121

Magic compositions in Pd-Au nanoalloys. B. Zhu, A. Front, H. Guesmi, J. Creuze, B. Legrand, C. Mottet, Computational and Theoretical Chemistry, 2017, 1107, 49-56

Nanoscale Phase Separation in Lithium Niobium Silicate Glass by Femtosecond Laser Irradiation. J. Cao, B. Poumellec, L. Mazerolles, F. Brisset, A.-L. Helbert, S. Surble, X. He, M. Lancry, Journal of the American Ceramic Society, 2017, 100, 115-124

Incoherent Ag islands growth on Ni(100). J.-B. Marie, I. Braems, A. Bellec, C. Chacon, J. Creuze, Y. Girard, S. Gueddani, J. Lagoute, V. Repain, S. Rousset, Surface Science, 2017, 656, 101-108

2016

Choice of a Substrate for PdxNi1-x Thin Films used as Hydrogen Sensors. M.-K. Loudjani, International Journal of Thin Films Science and Technology, 2016, 5, 169-171

Resistivity of NixCu1-x Alloy Films. M.-K. Loudjani, C. Sella, International Journal of Thin Films Science and Technology, 2016, 5, 25-31

Nanogratings formation in multicomponent silicate glasses. M. Lancry, F. Zimmerman, R. Desmarchelier, J. Tian, F. Brisset, S. Nolte, B. Poumellec, Applied Physics B, 2016, 122, 66

Residual stress analysis on oxide layers obtained by high temperature oxidation of Chromia-forming alloys. N. Li, J. Xiao, N. Prud'Homme, L. Li, V. Ji, Materials Research Proceedings 2, 2016, pp 365-370

EFFECT OF HEAT TREATMENT ON THE MICROSTRUCTURAL EVOLUTION IN WELD REGION OF 304L PIPELINE STEEL. Z. Boumerzoug, S. Hamza, V. Ji, Journal of Thermal Engineering, 2016, Vol. 2, No. 6, Special Issue 5,, pp. 1017-1022

Crystal structure, leakeage conduction mechanism evolution and enhanced multiferroic properties in Y-doped BiFeO3 ceramics. W. Jie, L. Yang, B. Xiofei, R. Haumont, B. Dkhil, Ceramics International, 2016, 42, 13395-13403

Magneto-transport properties of La0.75Ca0.15Sr0.1MnO3 with YBa2Cu3O7–δ addition. E. Zghal, M. Koubaa, P. Berthet, L. Sicard, W. Cheikhrouhou-Koubaa, C. Decorse-Pascanut, A. Cheikhrouhou, S. Ammar-Merah, Journal of Magnetism and Magnetic Materials, 2016, 414, 97-104

Hubbard band versus oxygen vacancy states in the correlated electron metal SrVO3. S. Backes, T. C. Rödel, F. Fortuna, E. Frantzeskakis, P. Le Fèvre, F. Bertran, M. Kobayashi, R. Yukawa, T. Mitsuhashi, M. Kitamura, K. Horiba, H. Kumigashira, R. Saint-Martin, A. Fouchet, B. Berini, Y. Dumont, A. J. Kim, F. Lechermann, H. O. Jeschke, M. J. Rozenberg, R. Valenti, A. F. Santander-Syro, Physical Review B, 2016, 94, 241110(R)

Preparation of metal-ceramic composites by sonochemical synthesis of metallic nano-particles and in-situ decoration on ceramic powders. A. Poulia, P.-M. Sakkas, D.-G. Kanellopoulou, G. Sourkouni, C. Legros, C. Argirusis, Ultrasonics Sonochemistry, 2016, 31, 417-422

Key role of the short-range order on the response of the titanate pyrochlore Y2Ti2O7 to irradiation. G. Sattonnay, S. Cammelli, D. Menut, N. Sellami, C. Grygiel, I. Monnet, J. Béchade, J.-P. Crocombette, A. Chartier, A. Soulié, R. Tétot, C. Legros, P. Simon, S. Miro, L. Thomé, PHYSICAL REVIEW B, 2016, 94, 224109

Molecular dynamics study of high-pressure alumina polymorphs with a tight-binding variable-charge model. N. Salles, O. Politano, E. Amzallag, R. Tétot, Computational Materials Science, 2016, 111, 181–189

XPS-nanocharacterization of organic layers electrochemically grafted on the surface of SnO2 thin films to produce a new hybrid material coating. R. Drevet, D. Dragoe, M.-G. Barthès-Labrousse, A. Chaussé, M. Andrieux, Applied Surface Science, 2016, 384, 442-448

Ultrashort Pulse Laser Processing of Silica at High Repetition Rates—from Network Change to Residual Strain. F. Zimmermann, M. Lancry, A. Plech, S. Richter, T. Ullsperger, B. Poumellec, A. Tünnermann, S. Nolte, International Journal of Applied Glass Science, 2016, 8

Femtosecond laser written nanostructures in Ge-doped glasses. F. Zimmermann, M. Lancry, A. Plech, S. Richter, B. H. Babu, B. Poumellec, A. Tünnermann, S. Nolte, Optics letters, 2016, 41, 1161-1164

Parity violation in chiral structure creation under femtosecond laser irradiation in silica glass&quest. B. Poumellec, M. Lancry, R. Desmarchelier, E. Hervé, B. Bourguignon, Light: Science & Applications, 2016, 5, e16178

Ge-and Al-related point defects generated by gamma irradiation in nanostructured erbium-doped optical fiber preforms. M. León, M. Lancry, N. Ollier, B. Babu, L. Bigot, H. El Hamzaoui, I. Savelii, A. Pastouret, E. Burov, F. Trompier, Journal of Materials Science, 2016, 51, 10245-10261

Low Loss Multimode Optical Fibers via Fictive Temperature Reduction by Means of Outer-Cladding Na Doping. M. Lancry, B. Poumellec, C. Gonnet, Journal of Lightwave Technology, 2016, 34, 1238-1241

Nanoscale femtosecond laser milling and control of nanoporosity in the normal and anomalous regimes of GeO 2-SiO 2 glasses. M. Lancry, J. Canning, K. Cook, M. Heili, D. Neuville, B. Poumellec, Optical Materials Express, 2016, 6, 321-330

The dependence of Raman defect bands in silica glasses on densification revisited. M. Heili, B. Poumellec, E. Burov, C. Gonnet, C. Le Losq, D. R. Neuville, M. Lancry, Journal of Materials Science, 2016, 51, 1659-1666

Tunable angular-dependent second-harmonic generation in glass by controlling femtosecond laser polarization. J. Cao, B. Poumellec, F. Brisset, A.-L. Helbert, M. Lancry, Journal of the Optical Society of America B, 2016, 33, 741-747

Form birefringence induced in multicomponent glass by femtosecond laser direct writing. J. Cao, L. Mazerolles, M. Lancry, D. Solas, F. Brisset, B. Poumellec, Optics Letters, 2016, 41, 2739-2742

Study of Radiation Effects on Er 3+-Doped Nanoparticles Germano-Silica Fibers. B. H. Babu, N. Ollier, I. Savelli, H. El Hamzaoui, A. Pastouret, B. Poumellec, M. Bouazaoui, L. Bigot, M. Lancry, Journal of Lightwave Technology, 2016, 34, 4981-4987

Radiation hardening of sol gel-derived silica fiber preforms through fictive temperature reduction. B. H. Babu, M. Lancry, N. Ollier, H. El Hamzaoui, M. Bouazoui, B. Poumellec, Applied Optics, 2016, 55, 7455-7461

Finite element modelling of the oxidation kinetics of Zy-4 with a controlled metal-oxide interface and the influence of growth stress. G. Zumpicchiat, S. Pascal, M. Tupin, C. Berdin, Corr. Sc., 2016, 100, 209-221

Study of texture, mechanical and electrical properties of cold drawn AGS alloy wire. M. Zidani, L. Bessais, H. Farh, M.-D. Hadid, S. Messaoudi, D. Miroud, M.-K. Loudjani, A.-L. Helbert, T. Baudin, Steel and Composite Structures, 2016, 22, 745-752

Investigation of the relationships between mechanical properties and microstructure in a Fe-9%Cr ODS steel. B. Hary, T. Guilbert, P. Wident, T. Baudin, R. Loge, Y. De Carlan, EPJ NUCLEAR SCIENCES & TECHNOLOGIES, 2016, 2, 1-8

Microstructural evolution and mechanical properties on an ARB processed IF steel studied by X-ray diffraction and EBSD. F. Cruz-Gandarilla, A. Maria Salcedo-Garrido, R. E. Bolmaro, T. Baudin, N. S. De Vincentis, M. Avalos, J. G. Cabanas-Moreno, H. Mendoza-Leon, MATERIALS CHARACTERIZATION, 2016, 118, 332-339

Thermal stability of Cu-Cr-Zr alloy processed by equal-channel angular pressing. K. Abib, H. Azzeddine, K. Tirsatine, T. Baudin, A.-L. Helbert, F. Brisset, B. Alili, D. Bradai, MATERIALS CHARACTERIZATION, 2016, 118, 527-534

Additive layer manufacturing of titanium matrix composites using the direct metal deposition laser process. S. Pouzet, P. Peyre, C. Gorny, O. Castelnau, T. Baudin, F. Brisset, C. Colin, P. Gadaud, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 677, 171-181

XPS-nanocharacterization of organic layers electrochemically grafted on the surface of SnO2 thin films to produce a new hybrid material coating. R. Drevet, D. Dragoe, M. G. Barthes-Labrousse, A. Chausse, M. Andrieux, Applied Surface Science, 2016, 384, 442-448

Self-lubricating, low-friction, wear-resistant Al-based quasicrystalline coatings. B. De Lima, R. M. Gomes, S. J. G. De Lima, D. Dragoe, M. G. Barthes-Labrousse, R. Kouitat-Njiwa, J. M. Dubois, Science and Technology of Advanced Materials, 2016, 17, 71-79

Stripe order of La1.64Eu0.2Sr0.16CuO4 in magnetic fields studied by resonant soft x-ray scattering. M. Zwiebler, E. Schierle, E. Weschke, B. Büchner, A. Revcolevschi, P. Ribeiro, J. Geck, J. Fink, Physical Review B, 2016, 94, 165157

Magnetic properties and crystal field in Pr2Zr2O7. P. Bonville, S. Guitteny, A. Gukasov, I. Mirebeau, S. Petit, C. Decorse, M. Ciomaga Hatnean, G. Balakrishnan, Physical Review B, 2016, 94, 134428

Antiferroquadrupolar correlations in the quantum spin ice candidate Pr2Zr2O7. S. Petit, E. Lhotel, O. Florea, J. Robert, P. Bonville, I. Mirebeau, J. Ollivier, H. Mutka, O. Ressouche, C. Decorse, M. Ciomaga Hatnean, G. Balakrishnan, Physical Review B, 2016, 94, 165153

Stability Diagram of Janus and Core–Shell Configurations in Bimetallic Nanowires. E. Maras, F. Berthier, B. Legrand, J. Phys. Chem. C, 2016, 120, 22670-22680

Development of an in situ method for measuring elastic and total strain fields at the grain scale with an estimation of accuracy. W. Chow, D. Solas, G. Puel, T. Baudin, V. Aubin, JOURNAL OF MATERIALS SCIENCE, 2016, 51, 1234 1250

Form birefringence induced in multicomponent glass by femtosecond laser direct writing. J. Cao, L. Mazerolles, M. Lancry, F. Brisset, B. Poumellec, OPTICS LETTERS, 2016, 41, 2739 2742

Modelling of liquid sodium induced crack propagation in T91 martensitic steel: Competition with ductile fracture. S. Hémery, C. Berdin, T. Auger, M. Bhouri, J. of Nuc. Mat., 2016, 481, 24-32

Magnetic ordering in the ultrapure site-diluted spin chain materials SrCu1−xNixO2. G. Simutis, M. Thede, R. Saint-Martin, A. Mohan, C. Baines, Z. Guguchia, R. Khasanov, C. Hess, A. Revcolevschi, B. Büchner, A. Zheludev, Physical Review B, 2016, 93, 214430

Zirconate pyrochlore frustrated magnets: Crystal growthby the floating zone technique. M. Ciomaga Hatnean, C. Decorse, M. R. Lees, O. A. Petrenko, G. Balakrishnan, Crystals, 2016, 6, 79

The half-metallic ferromagnetic characters of (001)-oriented thin films of the double perovskite Pb2FeMoO6. Y. Zhang, L. Duan, V. Ji, Thin Solid Films, 2016, 615, 318-323

The role of ionized impurity scattering on the thermoelectric performances of rock salt AgPbmSnSe2+m. L. Pan, S. Mitra, L.-D. Zhao, Y. Shen, Y. Wang, C. Felser, D. Berardan, Advanced Functional Materials, 2016, 26, 5149

Room temperature lithium superionic conductivity in high entropy oxides. D. Berardan, S. Franger, A. K. Meena, N. Dragoe, Journal of Materials Chemistry A, 2016, 6, 9536

The detailed crystal and electronic structures of the cotunnite-type ZrO2. Y. Zhang, L. Duan, V. Ji, Solid State Communications, 2016, 239, 27–31

Numerical analysis and experimental validation on residual stress distribution of titanium matrix composite after shot peening treatment. L. Xie, C. Wang, L. Wang, Z. Wang, C. Jiang, W. Lu, V. Ji, Mechanics of Materials, 2016, 99, 2–8

The detailed crystal and electronic structures of the cotunnite-type ZrO2. Y. Zhang, L. Duan, V. Ji, Solid State Communications, 2016, 239, 27-31

First-principles study of the structural, electronic, and magnetic properties of double perovskite Sr2FeReO6 containing various imperfections. Y. Zhang, L. Duan, V. Ji, K.-W. Xu, Chin. Phys. B, 2016, Vol. 25 Issue (5), 058102

Colossal dielectric constant in high entropy oxides. D. Berardan, S. Franger, D. Dragoe, A.-K. Meena, N. Dragoe, Physica Status Solidi (Rapid Research Letters), 2016, 10(4), 328-333

The structural, electronic, and magnetic properties of the stoichiometric (001) surface of double perovskite Sr2FeMoO6. Y. Zhang, V. Ji, K.-W. Xu, Surface and Interface Analysis, 2016, 1040–1047

Nematicity in stripe-ordered cuprates probed via resonant x-ray scattering. A. J. Achkar, M. Zwiebler, C. Mcmahon, F. He, R. Sutarto, I. Djianto, Z. Hao, M. J. P. Gingras, M. Hücker, G. D. Gu, A. Revcolevschi, H. Zhang, Y. J. Kim, J. Geck, D.-G. Hawthorn, Science, 2016, 351, 6273, 576-578

Microstructure and residual stresses in Ti-6Al-4V alloy pulsed and unpulsed TIG welds. B. Mehdi, R. Badji, V. Ji, B. Allili, D. Bradai, F.-D. Beaume, F. Soulié, Journal of Materials Processing Technology, 2016, 231, 441-448

Characterization on surface mechanical properties of Ti–6Al–4V after shot peening. L. Xie, Y. Wen, K. Zhan, L. Wang, C. Jiang, V. Ji, Journal of Alloys and Compounds, 2016, 666, 65-70

CO Adsorption-Induced Surface Segregation and Formation of Pd Chains on AuPd(100) Alloy: DFT-Based Ising Model and Monte Carlo Simulations. B. Zhu, J. Creuze, C. Mottet, B. Legrand, H. Guesmi, The Journal of Physical Chemistry C, 2016, 120, 350

2015

Relation between Microstructure and Electric Resistivity of Copper, Nickel, NixCu1-x Alloys and Ni/Cu Bilayered Thin Films. M.-K. Loudjani, C. Sella, International Journal of Thin Films Science and Technology, 2015, 4, 75-82

Kinetics of Thermally Activated Physical Processes in Disordered Media. B. Poumellec, M. Lancry, Fibers, 2015, 3, 206-252

An evaluation of high temperature tensile properties for a magnesium AZ31 alloy processed by high-pressure torsion. Y. Huang, P.-H.-R. Pereira, R.-B. Figueiredo, T. Baudin, A.-L. Helbert, F. Brisset, T.-G. Langdon, LETTERS ON MATERIALS-PIS MA O MATERIALAKH, 2015, 5, 341-346

Effect of humidity on high temperature oxidation of AISI 430 stainless steel. N. Li, J. Xiao, N. Prud’Homme, V. Ji, Materials Science Forum, 2015, Vol. 833, pp 165-168

Experimental evidence that a high electric field acts as an efficient external parameter during crystalline growth of bulk oxide. P. Hicher, R. Haumont, R. Saint-Martin, X. Mininger, P. Berthet, A. Revcolevski, Journal of Crystal Growth, 2015, 409, 23-26

Direct evidence of polar nature of ferroelastic twin boundaries in CaTiO3 obtained by second harmonic generation microscope. Y. Yokota, H. Usami, R. Haumont, P. Hicher, J. Kaneshiro, Y. Uesu, Physical Review B, 2015, 89, 144109

Modifications of structural and physical properties induced by swift heavy ions in Gd2Ti2O7 and Y2Ti2O7 pyrochlores. N. Sellami, G. Sattonnay, C. Grygiel, I. Monnet, A. Debelle, C. Legros, D. Menut, S. Miro, P. Simon, J.-L. Béchade, L. Thomé, Nuclear Instruments and Methods in Physics Research Section B, 2015, 365, 371-375

Oxygen Evolution Reaction on La1-xSrxCoO3 Perovskites: A Combined Experimental and Theoretical Study of Their Structural, Electronic, and Electrochemical Properties. X. Cheng, E. Fabbri, M. Nachtegaal, I. E. Castelli, M. El Kazzi, R. Haumont, N. Marzari, T. J. Schmidt, CHEMISTRY OF MATERIALS, 2015, 27, 7662-7672

Angular Dependence of the Second Harmonic Generation Induced by Femtosecond Laser Irradiation in Silica-Based Glasses: Variation with Writing Speed and Pulse Energy. J. Cao, B. Poumellec, F. Brisset, A.-L. Helbert, M. Lancry, World Journal of Nano Science and Engineering, 2015, 5, 96-106

In the heart of femtosecond laser induced nanogratings: from porous nanoplanes to form birefringence. R. Desmarchelier, B. Poumellec, F. Brisset, S. Mazerat, M. Lancry, World Journal of Nano Science and Engineering, 2015, 5, 115-125

Improved Tight-Binding Charge Transfer Model and Calculations of Energetics of a Step on the Rutile TiO 2(110) Surface. E. Maras, N. Salles, R. Tétot, T. Ala-Nissila, H. Jonsson, The journal of Physical Chemistry C, 2015, 119, 10391−10399

Copper Refinement from Anode to Cathode and then to Wire Rod: Effects of Impurities on Recrystallization Kinetics and Wire Ductility. A.-L. Helbert, A. Moya, T. Jil, M. Andrieux, M. Ignat, F. Brisset, T. Baudin, Microscopy and Microanalysis, 2015, 21, 1153-1166

Systematic control of structural changes in GeO2 glass induced by femtosecond laser direct writing. T. Asai, Y. Shimotsuma, T. Kurita, A. Murata, S. Kubota, M. Sakakura, K. Miura, F. Brisset, B. Poumellec, M. Lancry, Journal of the American Ceramic Society, 2015, 98, 1471-1477

Radiation hardening in sol-gel derived Er3+-doped silica glasses. B. H. Babu, N. Ollier, M. L. Pichel, H. El Hamzaoui, B. Poumellec, L. Bigot, I. Savelii, M. Bouazaoui, A. Ibarra, M. Lancry, Journal of Applied Physics, 2015, 118, 123107

Influence of photo-inscription conditions on the radiation-response of fiber Bragg gratings. A. Morana, S. Girard, E. Marin, M. Lancry, C. Marcandella, P. Paillet, L. Lablonde, T. Robin, R. J. Williams, M. J. Withford, Optics express, 2015, 23, 8659-8669

Achromatic polarization rotator imprinted by ultrafast laser nanostructuring in glass. R. Desmarchelier, M. Lancry, M. Gecevicius, M. Beresna, P. Kazansky, B. Poumellec, Applied Physics Letters, 2015, 107, 181111

Effect of temperature on the initial stages of oxidation of gamma-Al4Cu9(110). M. Warde, J. Ledieu, M. C. De Weerd, V. Fournee, M. G. Barthes-Labrousse, Applied Surface Science, 2015, 347, 208-213

Adsorption of O-2 and C2Hn (n=2, 4, 6) on the Al9Co2(001) and o-Al13Co4(100) complex metallic alloy surfaces. M. Warde, M. Herinx, J. Ledieu, L. N. S. Loli, V. Fournee, P. Gille, S. Le Moal, M. G. Barthes-Labrousse, Applied Surface Science, 2015, 357, 1666-1675

Metal organic precursor effect on the properties of SnO2 thin films deposited by MOCVD technique for electrochemical applications. R. Drevet, C. Legros, D. Berardan, P. Ribot, D. Dragoe, C. Cannizzo, M. G. Barthes-Labrousse, A. Chausse, M. Andrieux, Surface & Coatings Technology, 2015, 271, 234-241

3D numerical modeling of dynamic recrystallization under hot working: Application to Inconel 718. J. De Jaeger, D. Solas, O. Fandeur, J.-H. Schmitt, C. Rey, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 646, 33 44

Comparison of four arc welding processes used for aluminium alloy cladding. A. Benoit, P. Paillard, T. Baudin, V. Klosek, J.-B. Mottin, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2015, 20, 75-81

TEM STUDY OF RECRYSTALLIZATION IN ULTRA-FINE GRAIN AA3104 ALLOY PROCESSED BY HIGH-PRESSURE TORSION. H. Paul, A. Morawiec, T. Baudin, T. Czeppe, ARCHIVES OF METALLURGY AND MATERIALS, 2015, 60, 131-144

Formation of annealing twins during primary recrystallization of two low stacking fault energy Ni-based alloys. W. Wang, S. Lartigue-Korinek, F. Brisset, A.-L. Helbert, J. Bourgon, T. Baudin, JOURNAL OF MATERIALS SCIENCE, 2015, 50, 2167-2177

On the Influence of Crystallographic Texture on Pitting Corrosion in Pipeline Steels. V. Venegas, F. Caleyo, L. E. Vazquez, T. Baudin, J. M. Hallen, INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2015, 10, 3539-3552

Microstructure and texture evolution in a Cu-Ni-Si alloy processed by equal-channel angular pressing. F. H. Larbi, H. Azzeddine, T. Baudin, M.-H. Mathon, F. Brisset, A.-L. Helbert, M. Kawasaki, D. Bradai, T. G. Langdon, JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 638, 88-94

Microstructure, mechanical properties and texture of an AA6061/AA5754 composite fabricated by cross accumulative roll bonding. K. Verstraete, A.-L. Helbert, F. Brisset, A. Benoit, P. Poniard, T. Baudin, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 640, 235-242

Copper Refinement from Anode to Cathode and then to Wire Rod: Effects of Impurities on Recrystallization Kinetics and Wire Ductility. A.-L. Helbert, A. Moya, T. Jil, M. Andrieux, M. Ignat, F. Brisset, T. Baudin, MICROSCOPY AND MICROANALYSIS, 2015, 21, 1153-1166

Effect of Annealing Atmosphere on the Recrystallized Texture and Abnormal Grain Growth of Ni-5% W Alloy Sheets. Y. A. Betanda, A.-L. Helbert, F. Brisset, T. Waeckerle, T. Baudin, ADVANCED ENGINEERING MATERIALS, 2015, 17, 1568-1572

Structural, electronic and magnetic properties of the Si chains doped zigzag AlN nanoribbons. J.-M. Zhang, J. Zhang, K.-W. Xu, V. Ji, Physica E: Low-dimensional Systems and Nanostructures, 2015, 65, 114-119

Finite element analysis of laser shock peening of 2050-T8 aluminum alloy. N. Hfaiedh, P. Peyre, H. Song, I. Popa, V. Ji, V. Vignal, International Journal of Fatigue, 2015, 70, 480-489

Effects of Co contents on the microstructures and properties of electrodeposited NiCo–Al composite coatings. F. Cai, C. Jiang, P. Fu, V. Ji, Applied Surface Science, 2015, 324, 482-489

Two stages for the evolution of crystallite size and texture of electrodeposited Ni–ZrC composite coating. Z. Zhang, C. Jiang, F. Cai, P. Fu, N. Ma, V. Ji, Surface and Coatings Technology, 2015, 261, 122-129

Hydrogen adsorption and storage on palladium-decorated graphene with boron dopants and vacancy defects: A first-principles study. L. Ma, J.-M. Zhang, K.-W. Xu, V. Ji, Physica E: Low-dimensional Systems and Nanostructures, 2015, 66, 40-47

Effects of vertical strain on zigzag graphene nanoribbon with a topological line defect. L.-H. Qu, J.-M. Zhang, K.-W. Xu, V. Ji, Physica E: Low-dimensional Systems and Nanostructures, 2015, 67, 116-120

Effects of Co contents on the microstructures and properties of the electrodeposited NiCo–Zr composite coatings. F. Cai, C. Jiang, Y. Zhao, V. Ji, Materials Research Bulletin, 2015, 65, 195-203

A first-principles study on uniaxial strain effects of nonplanar oxygen-functionalized armchair graphene nanoribbons. L.-H. Qu, J.-M. Zhang, K.-W. Xu, V. Ji, Journal of Alloys and Compounds, 2015, 631, 219-224

Fabrication and characterization of Ni–Zr composite coatings using electrodepositing technique. F. Cai, C. Jiang, Z. Zhang, E. Muttini, P. Fu, Y. Zhao, V. Ji, Journal of Alloys and Compounds, 2015, 635, 73-81

Nanoscale microstructural and chemical analysis of SiO2-Zn1-xAlxO nanocomposites: towards a better understanding of Si and Al substitution in ZnO. M. Gilbert, C. Byl, D. Berardan, A. Gloter, N. Dragoe, F. Vurpillot, Journal of the American Ceramic Society, 2015, 98, 3948

Preparation and study of the thermoelectric properties of nanocrystalline Sn1-xTaxO2 (0. T.-T.-X. Vo, N.-G.-H. Le, Q.-N. Pham, C. Byl, D. Dragoe, M.-G. Barthes-Labrousse, D. Berardan, N. Dragoe, Physica Status Solidi A, 2015, 212, 2776

Structure and transport properties of the BiCuSeO-BiCuSO solid solution. D. Berardan, J. Li, E. Amzallag, S. Mitra, J. Sui, W. Cai, N. Dragoe, Materials, 2015, 8, 01043

BaCu2Se2 based compounds as promising thermoelectric materials. J. Li, L. Zhao, J. Sui, D. Berardan, W. Cai, N. Dragoe, Dalton Transactions, 2015, 44, 2285

Transport properties of the SnBi2Te4-PbBi2Te4 solid solution. L. Pan, J. Li, D. Berardan, N. Dragoe, Journal of Solid State Chemistry, 2015, 225, 168

A round robin test of the uncertainty on the measurement of the thermoelectric dimensionless figure of merit of Co0.97Ni0.03Sb3. E. Alleno, D. Berardan, C. Byl, C. Candolfi, R. Daou, R. Decourt, E. Guilmeau, S. Hebert, J. Hejtmanek, B. Lenoir, P. Masschelein, V. Ohorodnichuk, M. Pollet, S. Populoh, D. Ravot, O. Rouleau, M. Soulier, Review of Scientific Instruments, 2015, 86, 011301

Studies on the thermal stability of BiCuSeO. C. Barreteau, D. Berardan, N. Dragoe, Journal of Solid State Chemistry, 2015, 222, 53

Hydrogen assisted phase transition in a trihydride MgNi2H3 synthesized at high hydrogen pressures: thermodynamics, crystal and electronic structures. V. Yartys, V. Antonov, A. Beskrovnyi, J.-C. Crivello, R. Denys, V. Fedotov, M. Gupta, V. Kulakov, M. Kuzovnikov, M. Latroche, Y. Morozov, S. Sheverev, B. Tarasov, Acta Materialia, 2015, 82, 316-327

First principles investigations of the electronic structure of hydrides of intermetallic compounds La2Ni7 and alloys (La-Mg)2Ni7. J.-C. Crivello, M. Gupta, M. Latroche, Journal of Alloys and Compounds, 2015, 645, 5-8

Mesoscopic correlations in Tb2Ti2O7 liquid spin. S. Guitteny, I. Mirebeau, P. Dalmas De Réotier, C. Colin, P. Bonville, F. Porcher, B. Grenier, C. Decorse, S. Petit, Physical Review B, 2015, 92, 144412

Spin dynamics in the presence of competing ferromagnetic and antiferromagnetic correlations in Yb2Ti2O7. J. Robert, E. Lhotel, G. Remenyi, S. Sahling, I. Mirebeau, C. Decorse, B. Canals, S. Petit, Physical Review B, 2015, 92, 064425

Surface segregation in AuPd alloys: ab initio analysis of the driving forces. J. Creuze, H. Guesmi, C. Mottet, B. Zhu, B. Legrand, Surface Science, 2015, 639, 48

Crossover among structural motifs in Pd-Au nanoalloys. B. Zhu, H. Guesmi, J. Creuze, B. Legrand, C. Mottet, Physical Chemistry Chemical Physics, 2015, 17, 28129

Suppression of the impurity-induced local magnetism by the opening of a spin pseudogap in Ni-doped Sr2CuO3. Y. Utz, F. Hammerath, S. Nishimoto, C. Hess, N. S. Beesetty, R. Saint-Martin, A. Revcolevschi, B. Büchner, H.-J. Grafe, Physical Review B, 2015, 92, 6, 060405R

Characterization of the deformation texture after tensile test and cold rolling of a Ti-6Al-4V sheet alloy. B. Mehdi, H. Azzeddine, R. Badji, V. Ji, B. Alili, D. Bradai, IOP Conf. Series: Materials Science and Engineering, 2015, 82, 012018

A first-principles study on gas sensing properties of graphene andPd-doped graphene. L. Ma, J.-M. Zhang, K.-W. Xu, V. Ji, Applied Surface Science, 2015, 343, 121–127

Effects of the defects on the structural, electronic and magnetic properties of Sr2FeMoO6. Y. Zhang, V. Ji, K.-W. Xu, Journal of Alloys and Compounds, 2015, 648, 374-381

Residual stress distribution and microstructure in the friction stir weld of 7075 aluminum alloy. P. Ji, Z. Yang, J. Zhang, L. Zheng, V. Ji, V. Klosek, J Mater Sci, 2015, 50, 7262–7270

Quantitative study of particle size distribution in an in-situ grown Al–TiB2 composite by synchrotron X-ray diffraction and electron microscopy. Y. Tan, Z. Chen, A. Borbélyb, G. Ji, S.-Y. Zhong, D. Schryvers, V. Ji, H.-W. Wang, Materials Characterization, 2015, 102, 131–136

Effects of the defects on the half-metallic characters and magnetic properties in double perovskite Pb2FeMoO6. Y. Zhang, K.-W. Xu, V. Ji, Materials Chemistry and Physics, 2015, 162, 711-723

Study of ion diffusion in oxidation films grown on a model Fe–15%Cr alloy. A. C. S. Sabioni, J. N. V. Souza, V. Ji, F. Jomard, V. B. Trindade, J. F. Carneiro, Solid State Ionics, 2015, 276, 1–8

Experimental realization of long-distance entanglement between spins in antiferromagnetic quantum spin chains. S. Sahling, G. Remenyi, C. Paulsen, P. Monceau, V. Saligrama, C. Marin, A. Revcolevschi, L. P. Regnault, S. Raymond, J. E. Lorenzo, Nature Physics, 2015, 11, 255-260

Phase diagrams of nanoalloys: influence of size and morphology. F. Berthier, E. Maras, B. Legrand, Phys. Chem. Chem. Phys., 2015, 17, 28347-28353

Memristive and neuromorphic behavior in a LixCoO2 nanobattery. V. H. Mai, A. Moradpour, P. A. Senzier, C. Pasquier, K. Wang, M. J. Rozenberg, J. Giapintzakis, C. N. Mihailescu, C. M. Orfanidou, E. Svoukis, A. Breza, C. B. Lioutas, S. Franger, A. Revcolevschi, T. Maroutian, P. Lecoeur, P. Aubert, G. Agnus, R. Salot, P. A. Albouy, R. Weil, D. Alamarguy, K. March, F. Jomard, P. Chretien, O. Schneegans, Scientific Reports, 2015, 5, 7761

Antibacterial surfaces obtained through dopamine and fluorination functionalizations. B. Lepoittevin, S. Bedel, D. Dragoe, J. Bruzaud, M.-G. Barthes-Labrousse, S. Mazerat, J.-M. Herry, M.-N. Bellon-Fontaine, P. Roger, Progress in Organic Coatings, 2015, 82, 17-25

Single-crystal growth of Mg- and Ni-doped chain compound SrCuO2 by the traveling-solvent floating-zone method and chain breaking effect induced by the dopants. R. Saint-Martin, P. Berthet, A. Revcolevschi, Journal of Crystal Growth, 2015, 415, 118-122

The effect of strontium non-stoichiometry on the physical properties of double perovskite Sr2FeMoO6. L. Harnagea, P. Berthet, Journal of Solid State Chemistry, 2015, 222, 115-122

Ageing of out-of-equilibrium nanoalloys by a kinetic mean-field approach. F. Berthier, A. Tadjine, B. Legrand, Phys. Chem. Chem. Phys., 2015, 17, 28193-28199

Internal stresses at the crystalline scale in textured ZrO2 films before lateral cracking. C. Berdin, S. Pascal, Y. Tang, J. Nuc. Mat., 2015, 460, 44-51

2014

Residual stress study in oxide scale obtained on high temperature oxidation of AISI 430 stainless steel. N. Li, J. Xiao, N. Prud’Homme, V. Ji, Advanced Materials Research, 2014, Vol. 996, pp 918-923

Structural and electronic properties of copper nanowires inside zigzag carbon nanotubes. Y.-N. Duan, J.-M. Zhang, X.-M. Wei, X.-X. Fan, K.-W. Xu, V. Ji, Physica B: Condensed Matter, 2014, 447, 77-82

Improving SO2 gas sensing properties of graphene by introducing dopant and defect: A first-principles study. X.-Y. Liu, J.-M. Zhang, K.-W. Xu, V. Ji, Applied Surface Science, 2014, 313, 405-410

Synthesis and characterization of Ni–Al–Y2O3 composite coatings with different Y2O3 particle content. F. Cai, C. Jiang, Z. Zhang, V. Ji, Ceramics International, 2014, 40, 15105-15111

Residual stress study in oxide scale obtained on high temperature oxidation of AISI 430 stainless steel. N. Li, J. Xiao, N. Prud'Homme, V. Ji, Advanced Materials Research, 2014, 966, 918-923

Residual stresses in oxide scale formed on Fe–17Cr stainless steel. N. Li, J. Xiao, N. Prud'Homme, Z. Chen, V. Ji, Applied Surface Science, 2014, 316, 108-113

Scanning Tunneling Microscopy Investigation of Ultrathin Titanium Oxide Films Grown on Pt3Ti(111). C. Breinlich, M. Buchholz, M. Moors, S. Le Moal, C. Becker, K. Wandelt, JOURNAL OF PHYSICAL CHEMISTRY C, 2014, 118, 6186-6192

Experimental approach and atomistic simulations to investigate the radiation tolerance of complex oxides: Application to the amorphization of pyrochlores. F. Sattonnay, L. Thomé, N. Sellami, I. Monnet, C. Grygiel, C. Legros, R. Tétot, Nuclear Instruments and Methods in Physics Research B, 2014, 326, 228-233

The theoretical account of the ligand field bonding regime and magnetic anisotropy in the DySc2N@C80 single ion magnet endohedral fullerene. F. Cimpoesu, N. Dragoe, H. Ramanantoanina, W. Urland, C. Daul, Phys. Chem. Chem. Phys., 2014, 16, 11337-11348

One-step photoinscription of asymmetrically oriented fresnoite-type crystals in glass by ultrafast laser. X. He, B. Poumellec, Q. Liu, F. Brisset, M. Lancry, Optics letters, 2014, 39, 5423-5426

Size-controlled oriented crystallization in SiO 2-based glasses by femtosecond laser irradiation. X. He, C. Fan, B. Poumellec, Q. Liu, H. Zeng, F. Brisset, G. Chen, X. Zhao, M. Lancry, JOSA B, 2014, 31, 376-381

Asymmetric orientational writing dependence on polarization and direction in Li2O–Nb2O5–SiO2 glass with femtosecond laser irradiation. C. Fan, B. Poumellec, R. Desmarchelier, H. Zeng, B. Bourguignon, G. Chen, M. Lancry, Applied Physics B, 2014, 117, 737-747

Growth and structure of ultrathin alumina films on the (110) surface of gamma-Al4Cu9 complex metallic alloy. M. Warde, J. Ledieu, L. N. S. Loli, M. Herinx, M. C. De Weerd, V. Fournee, S. Le Moal, M. G. Barthes-Labrousse, Journal of Physics-Condensed Matter, 2014, 26

High temperature oxidation of AlCrFe complex metallic alloys. N. Prud'Homme, P. Ribot, M. Herinx, P. Gille, B. Bauer, M. C. De Weerd, M. G. Barthes-Labrousse, Corrosion Science, 2014, 89, 118-126

Patterning SiC nanoprecipitate in Si single crystals by simultaneous dual- beam ion implantation. G. Velisa, P. Trocellier, L. Thome, S. Vaubaillon, G. Sattonnay, S. Miro, Y. Serruys, Journal of Materials Science, 2014, 49, 4899-4904

Atomic scale simulations of pyrochlore oxides with a tight-binding variable-charge model: implications for radiation tolerance. G. Sattonnay, R. Tetot, Journal of Physics-Condensed Matter, 2014, 26, 055403

Hard X-ray Photoelectron Spectroscopy (HAXPES) characterisation of electrochemical passivation oxide layers on Al-Cr-Fe complex metallic alloys (CMAs). A. Beni, N. Ott, M. Pawelkiewicz, M. Warde, K. Young, B. Bauer, P. Rajput, B. Detlefs, J. Zegenhagen, R. Mcgrath, M. G. Barthes-Labrousse, L. P. H. Jeurgens, P. Schmutz, Electrochemistry Communications, 2014, 46, 13-17

Influence of stored energy on twin formation during primary recrystallization. W. Wang, F. Brisset, A.-L. Helbert, D. Solas, I. Drouelle, M. H. Mathon, T. Baudin, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 589, 112-118

Quantitative infrared analysis of welding processes: temperature measurement during RSW and CMT-MIG welding. R. Frappier, A. Benoit, P. Paillard, T. Baudin, R. Le Gall, T. Dupuy, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2014, 19, 38-43

CHARACTERIZATION OF EXPLOSIVE WELD JOINTS BY TEM AND SEM/EBSD. H. Paul, J. Morgiel, T. Baudin, F. Brisset, M. Prazmowski, M. Miszczyk, ARCHIVES OF METALLURGY AND MATERIALS, 2014, 59, 1129-1136

Effect of long range order on mechanical properties of partially recrystallized Fe49Co-2V alloy. B. Nabi, A.-L. Helbert, F. Brisset, R. Batonnet, G. Andre, T. Waeckerle, T. Baudin, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 592, 70-76

Influence of Sulfur on the Recrystallization and 100< 001 > Cube Texture Formation in Fe48%Ni Alloys Tapes. Y. A. Betanda, A.-L. Helbert, F. Brisset, M. Wehbi, M.-H. Mathon, T. Waeckerle, T. Baudin, ADVANCED ENGINEERING MATERIALS, 2014, 16, 933-939

The effect of Ti/Y ratio on the recrystallisation behaviour of Fe-14%Cr oxide dispersion-strengthened alloys. S. Y. Zhong, J. Ribis, T. Baudin, N. Lochet, Y. De Carlan, V. Klosek, M. H. Mathon, JOURNAL OF NUCLEAR MATERIALS, 2014, 452, 359-363

Measurement of stored energy in Fe-48%Ni alloys strongly cold-rolled using three approaches: Neutron diffraction, Dillamore and KAM approaches. Y. A. Betanda, A.-L. Helbert, F. Brisset, M.-H. Mathon, T. Waeckerle, T. Baudin, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 614, 193-198

Texture and microstructure evolution of Fe-Ni alloy after accumulative roll bonding. K. Tirsatine, H. Azzeddine, T. Baudin, A.-L. Helbert, F. Brisset, B. Alili, D. Bradai, JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 610, 352-360

Texture evolution of an Fe-Ni alloy sheet produced by cross accumulative roll bonding. H. Azzeddine, K. Tirsatine, T. Baudin, A.-L. Helbert, F. Brisset, D. Bradai, MATERIALS CHARACTERIZATION, 2014, 97, 140-149

Monte Carlo simulation of primary recrystallization and annealing twinning. W. Wang, A.-L. Helbert, F. Brisset, M. H. Mathon, T. Baudin, ACTA MATERIALIA, 2014, 81, 457-468

BiCuSeO oxyselenides: new promising thermoelectric materials. L. Zhao, J. He, D. Berardan, Y. Lin, J.-F. Li, C.-W. Nan, N. Dragoe, Energy & Environmental Science, 2014, 7, 2900

Roles of Na doping in BiCuSeO oxyselenides as a thermoelectric material. J. Li, J. Sui, Y.-L. Pei, X. Meng, D. Berardan, N. Dragoe, W. Cai, L. Zhao, Journal of Materials Chemistry A, 2014, 2, 4903

Layered oxychalcogenide in the Bi-Cu-O-Se system as good thermoelectric materials. C. Barreteau, L. Pan, E. Amzallag, L. Zhao, D. Berardan, N. Dragoe, Semiconductor Science & Technology, 2014, 29, 064001

The phase stability and thermophysical properties of InFeO3(ZnO)m (m=2, 3, 4, 5). C.-L. Zhang, Y.-L. Pei, L. Zhao, D. Berardan, N. Dragoe, S.-K. Gong, H.-B. Guo, Journal of the European Ceramic Society, 2014, 34, 63

Structural and magnetic properties of single-cristal of the geometrically frustrated zirconium pyrochlore, Pr2Zr2O7. M. Ciomaga Hatnean, C. Decorse, M.-R. Lees, O.-A. Petrenko, D.-S. Keeble, G. Balakrishnan, Materials Research Express, 2014, 1, 026109

Order by disorder or energetic selection of the ground state in the XY pyrochlore antiferromagnet Er2Ti2O7: An inelastic neutron scattering study. S. Petit, J. Robert, S. Guitteny, P. Bonville, C. Decorse, J. Ollivier, H. Mutka, M. J. P. Gingras, I. Mirebeau, Physical Review B, 2014, 90, 060410(R)

X-Ray Analysis of Residual Stress in Weld Region of X70 Pipeline Steel. Z. Boumerzoug, K. Digheche, V. Ji, Advanced Materials Research, 2014, Vol. 936, 2011-2016

Residual Stress and Microstructures Characterization in Welded Al-Si- 12Cu Alloy. Z. Boumerzoug, C. Bouremel, V. Ji, Advanced Materials Research, 2014, Vol. 856, 201-204

Residual stress and micro-structure of GCr15 steel after multistep shot peening. P. Fu, C. Jiang, Z. Zhang, V. Ji, Surface Engineering, 2014, VOL 30 NO 11, 847-851

Nitrogen and Boron substitutional doped zigzag silicene nanoribbons: Ab initio investigation. L. Ma, J.-M. Zhang, K.-W. Xu, V. Ji, Physica E, 2014, 60, 112–117

Armchair graphene nanoribbos under shear strain. L.-H. Qu, J.-M. Zhang, K.-W. Xu, V. Ji, Physica E, 2014, 60, 156–159

Magnetic properties and possible martensitic transformation in Mn2NiSi and Ni2MnSi Heusler alloys. Q.-L. Fang, J.-M. Zhang, X.-M. Zhao, K.-W. Xu, V. Ji, Journal ofMagnetismandMagneticMaterials, 2014, 362, 42–46

The study of the P doped silicene nanoribbons with first-principles. J.-M. Zhang, W.-T. Song, K.-W. Xu, V. Ji, Computational Materials Science, 2014, 95, 429–434

Effects of the 3d transition metal doping on the structural, electronic, and magnetic properties of BeO nanotubes. J.-M. Zhang, W.-T. Song, H.-H. Li, K.-W. Xu, V. Ji, Chin. Phys. B, 2014, Vol. 23, No. 1, 017103-01/06

Bond disorder and spinon heat transport in the S=1/2 Heisenberg spin chain compound Sr2CuO3: From clean to dirty limits. A. Mohan, N. S. Beesetty, N. Hlubek, R. Saint-Martin, A. Revcolevschi, B. Büchner, C. Hess, Physical Review B, 2014, 89, 104302

Spin gap in the single spin chain cuprate Sr1.9Ca0.1CuO3. F. Hammerath, E. M. Brüning, S. Sanna, Y. Utz, N. S. Beesetty, R. Saint-Martin, A. Revcolevschi, C. Hess, B. Büchner, H.-J. Grafe, Physical Review B, 2014, 89, 184410

Amorphous ferromagnetism and re-entrant magnetic glassiness in single-crystalline Sm2Mo2O7. G. Prando, P. Carretta, A. U. B. Wolter, R. Saint-Martin, A. Revcolevschi, B. Büchner, Physical Review B, 2014, 90, 085111

Charge and magnetic states of rutile TiO2 doped with Cr ions. R. Kim, S. Cho, W.-G. Park, D.-Y. Cho, S.-J. Oh, R. Saint-Martin, P. Berthet, J.-G. Park, J. Yu, Journal of Physics: Condensed Matter, 2014, 26

Low-field magnetoresistance up to 400 K in double perovskite Sr2FeMoO6 synthesized by a citrate route. L. Harnagea, B. Jurca, P. Berthet, Journal of Solid State Chemistry, 2014, 211, 219-226

Structural Investigation and Functional Properties of MgxNi1−xFe2O4 Ferrites. M. Airimioaei, M.-N. Palamaru, A. R. Iordan, P. Berthet, C. Decorse, L. Curecheriu, L. Mitoseriu, Journal of the American Ceramic Society, 2014, 97, 519-526

4He behavior in calcite filling viewed by (U–Th)/He dating, 4He diffusion and crystallographic studies. A. Cros, C. Gautheron, M. Pagel, P. Berthet, L. Tassan-Got, E. Douville, R. Pinna-Jamme, P. Sarda, Geochimica et Cosmochimica Acta, 2014, 125, 414-432

Inhomogenous ordering in weakly coupled Heisenberg s = 1/2 chains with random bonds. M. Thede, T. Haku, T. Masuda, C. Baines, E. Pojakushina, G. Dhalenne, A. Revcolevschi, E. Morenzoni, A. Zheludev, Physical Review B, 2014, 90, 144407

2013

Phase Transformations in Pyrochlores Irradiated by Swift Heavy Ions: Influence of Composition and Chemical Bonding. G. Sattonnay, L. Thomé, N. Sellami, I. Monnet, C. Grygiel, C. Legros, R. Tétot, Acta Physica Polonica A, 2013, 123, 862

Study of the Relation between Microstructure and Properties (Mechanical/Electrical) of Copper Wire Drawing and Annealed. M. Zidani, S. Messaoudi, F. Dendouga, T. Baudin, C. Derfouf, A. Boulagroun, M. H. Mathon, Acta Physica Polonica A, 2013, 123, 470-472

Microstructural Evolution and Mechanical Response of the Surface of 18CrNiMo7-6 Steel after Multistep Shot Peening during Annealing. P. Fu, C. Jiang, V. Ji, MATERIALS TRANSACTIONS, 2013, 54, 2180-2184

Growth and structural characterization of orthorhombic and tetragonal SrCuO2 thin films. C. N. Mihailescu, I. Pasuk, G. I. Athanasopoulos, C. Lululescu, M. Socol, R. Saint-Martin, A. Revcolevschi, J. Giapintzakis, Applied Surface Science, 2013, 278, 132-135

Lattice modes in paraelectric La1/2Na1/2TiO3 by infrared and Raman spectroscopy. F. Borodavka, S. Simon, I. Gregora, S. Kamba, R. Haumont, J. Hlinka, Journal of Physics. Condensed Matter : an institute of Physics Journal, 2013, 25, 085901

Structural investigation of strontium titanate nanoparticles and the core-shell model. J.-M. Kiat, R. Haumont, Physical Review B, 2013, 87, 024106

Surface-driven, one-step chemical vapor deposition of γ-Al4Cu9 complex metallic alloy film. N. Prud'Homme, T. Duguet, D. Samélor, F. Senocq, C. Vahlas, Applied Surface Science, 2013, 283, 788-793

Structural transitions in a doped lanthanum cuprate. S.-H. Baek, P. C. Hammel, M. Huecker, B. Buechner, U. Ammerahl, A. Revcolevschi, B. J. Suh, PHYSICAL REVIEW B, 2013, 87, 174505

Low temperature ballistic spin transport in the S=1/2 antiferromagnetic Heisenberg chain compound SrCuO2. H. Maeter, A. A. Zvyagin, H. Luetkens, G. Pascua, Z. Shermadini, R. Saint-Martin, A. Revcolevschi, C. Hess, B. Buechner, H.-H. Klauss, JOURNAL OF PHYSICS-CONDENSED MATTER, 2013, 25, 365601

Determining the Short-Range Spin Correlations in the Spin-Chain Li2CuO2 and CuGeO3 Compounds Using Resonant Inelastic X-Ray Scattering. C. Monney, V. Bisogni, K.-J. Zhou, R. Kraus, V. N. Strocov, G. Behr, J. Malek, R. Kuzian, S.-L. Drechsler, S. Johnston, A. Revcolevschi, B. Buechner, H. M. Ronnow, J. Van Den Brink, J. Geck, T. Schmitt, PHYSICAL REVIEW LETTERS, 2013, 110, 087403

Phonon-Magnon Interaction in Low Dimensional Quantum Magnets Observed by Dynamic Heat Transport Measurements. M. Montagnese, M. Otter, X. Zotos, D. A. Fishman, N. Hlubek, O. Mityashkin, C. Hess, R. Saint-Martin, S. Singh, A. Revcolevschi, P. H. M. Van Loosdrecht, PHYSICAL REVIEW LETTERS, 2013, 110, 147206

Structural and compositional characterization of ultrathin titanium oxide films grown on Pt3Ti(111). S. Le Moal, M. Moors, J. M. Essen, C. Breinlich, C. Becker, K. Wandelt, JOURNAL OF PHYSICS-CONDENSED MATTER, 2013, 25, 045013

Controllable 3D crystallization in SiO2-based glasses by femtosecond laser. X. He, C. Fan, B. Poumellec, F. Brisset, Q. Liu, H. Zeng, G. Chen, X. Zhao, M. Lancry, MATEC Web of Conferences, 2013, 8, 02009

Insulator-metal transition of VO2 ultrathin films on silicon: evidence for an electronic origin by infrared spectroscopy. W. Peng, G. Niu, R. Tétot, B. Vilquin, F. Raimondi, J.-B. Brubach, E. Amzallag, T. Yanagida, S. Autier-Laurent, P. Lecoeur, P. Roy, Journal of Physics-Condensed Matter, 2013, 25, 445402

SrTiO3 (001) surface and strained thin films: Atomic simulations using a tight-binding variable-charge model. R. Tétot, N. Salles, S. Landron, E. Amzallag, Surface Science, 2013, 616, 19-28

Residual stress study of nanostructured Zirconia films obtained by MOCVD and by Sol-gel routes. M. Jouili, M. Andrieux, P. Ribot, A. Bleuzen, G. Fornasieri, V. Ji, Applied Surface Science, 2013, 276, 138-146

Interaction of nickel aminoalkoxide with samarium β-diketonate – identification of new precursors for MOCVD synthesis of SmNiO3 perovskite films. G. Seisenbaeva, V. Kessler, M. Andrieux, Polyhedron, 2013, 50, 31-35

SEM-EBSD observations of crack initiation and propagation due to orientation changes during forming in mild steel. A. Boumaiza, N. Rouag, T. Baudin, R. Penelle, Advanced Materials Research, 2013, 682, 25-32

Local approach to ductile fracture and dynamic strain aging. C. Berdin, H. Wang, Int. J. Fract, 2013, 182, 39-51

Internal stresses in polycrystalline zirconia: microstructure effects. C. Berdin, Z. Yao, S. Pascal, comp. Mat. Sc., 2013, 70, 140-144

Laser tailoring surface interactions, contact angles, drop topologies and the self-assembly of optical microwires. J. Canning, H. Weil, M. Naqshbandi, K. Cook, M. Lancry, Optical Materials Express, 2013, 3, 284-294

Asymmetric Orientational Writing in glass with femtosecond laser irradiation. B. Poumellec, M. Lancry, R. Desmarchelier, E. Hervé, F. Brisset, J. Poulin, Optical Materials Express, 2013, 3, 1586-1599

Ultrafast nanoporous silica formation driven by femtosecond laser irradiation. M. Lancry, B. Poumellec, J. Canning, K. Cook, J.-C. Poulin, F. Brisset, Laser & Photonics Reviews, 2013, 7, 953-962

UV laser processing and multiphoton absorption processes in optical telecommunication fiber materials. M. Lancry, B. Poumellec, Physics Reports, 2013, 523, 207-229

Broadband anisotropy of femtosecond laser induced nanogratings in fused silica. M. Beresna, M. Geceviçius, M. Lancry, B. Poumellec, P. Kazansky, Applied Physics Letters, 2013, 103, 131903

STM and XPS investigation of the oxidation of the Al-4(Cr,Fe) quasicrystal approximant. J. K. Parle, A. Beni, V. R. Dhanak, J. A. Smerdon, P. Schmutz, M. Warde, M. G. Barthes-Labrousse, B. Bauer, P. Gille, H. R. Sharma, R. Mcgrath, Applied Surface Science, 2013, 283, 276-282

Bulk, surface and point defect properties in UO2 from a tight-binding variable-charge model. G. Sattonnay, R. Tetot, Journal of Physics-Condensed Matter, 2013, 25, 125403

Structural stability of Nd2Zr2O7 pyrochlore ion-irradiated in a broad energy range. G. Sattonnay, N. Sellami, L. Thome, C. Legros, C. Grygiel, I. Monnet, J. Jagielski, I. Jozwik-Biala, P. Simon, Acta Materialia, 2013, 61, 6492-6505

AuNi alloy monolayer films electrodeposited on Au(111): An in situ STM study. F. Lecadre, F. Maroun, I. Braems, F. Berthier, C. Goyhenex, P. Allongue, Surface Science, 2013, 607, 25-32

Nanocrystallized SnO2 thin films deposited on Si and LaAlO3 substrates by pulsed-MOCVD technique for electrochemical applications. R. Drevet, C. Legros, D. Berardan, P. Ribot, A. Chaussé, M. Andrieux, Surface & Coatings Technology, 2013, 230, 180-185

Texturation boosts the thermoelectric performance of BiCuSeO oxyselenides. J. Sui, J. Li, J. He, Y.-L. Pei, D. Bérardan, H. Wu, N. Dragoe, W. Cai, L. Zhao, Energy & Environmental Science, 2013, 6, 2916

Oxychalcogenides as new efficient p-type thermoelectric materials. C. Barreteau, L. Pan, Y.-L. Pei, L. Zhao, D. Bérardan, N. Dragoe, Functional Materials Letters, 2013, 6, 1340007

Preparation and study of thermoelectric properties of fine grains GdxZn1-xO. T.-N. Ha Le, F. Hou, T.-T. Xuan Vo, Q. N. Pham, D. Bérardan, N. Dragoe, Physica Status Solidi a, 2013, 210, 2693

High thermoelectric performance in n-type BiAgSeS due to intrinsically low thermal conductivity. Y.-L. Pei, H. Wu, J. Li, D. Bérardan, C. Barreteau, L. Pan, N. Dragoe, W.-S. Liu, J. Sui, J. He, L. Zhao, Energy & Environmental Science, 2013, 6, 1750

Direct synthesis of BiCuChO-type oxychalcogenides by mechanical alloying. V. Pelé, C. Barreteau, D. Bérardan, L. Zhao, N. Dragoe, Journal of Solid State Chemistry, 2013, 203, 187

High thermoelectric properties of n-type AgBiSe2. L. Pan, D. Bérardan, N. Dragoe, Journal of the American Chemical Society, 2013, 135, 4914

High thermoelectric performance from an oxyselenide. Intrisically low thermal conductivity in Ca doped BiCuSeO. Y. Pei, F. Li, J.-F. Li, Q. Liu, W. Pan, C. Barreteau, D. Bérardan, N. Dragoe, J. He, L. Zhao, NPG Asia Materials, 2013, 5, e47

Superconductivity and mechanical properties for LaFe1-xZnxAsO0.85F0.15. Y. Pei, D. Bérardan, C. Barreteau, N. Dragoe, J. Sui, L. Zhao, Journal of alloys and compounds, 2013, 563, 261

Influence of the Te substitution on the structural and electronic properties of thermoelectric BiCuSeO. C. Barreteau, D. Bérardan, L. Zhao, N. Dragoe, Journal of Materials Chemistry A, 2013, 1, 2921

Influence of Pb doping on the electrical transport properties of BiCuSeO. L. Pan, D. Bérardan, L. Zhao, C. Barreteau, N. Dragoe, Applied Physics Letters, 2013, 102, 023902

Evidence ofa structural phase transition in superconducting SmFeAsO1-xFx from 19F NMR. M. Majumder, K. Ghoshray, C. Mazumdar, A. Poddar, A. Ghoshray, D. Bérardan, N. Dragoe, Journal of Physics: Condensed Matter, 2013, 25, 025701

Thermoelectric properties of Mg doped p-type BiCuSeO oxyselenides. J. Li, J. Sui, Y. Pei, C. Barreteau, D. Bérardan, N. Dragoe, W. Cai, L. Zhao, Journal of alloys and compounds, 2013, 551, 649

Effect of TiO2 and SrO additions on some physical properties of 33Na(2)O-xSrO-xTiO(2)-(50-2x)B2O3-17P(2)O(5) glasses. H. Sinouh, L. Bih, M. Azrour, A. El Bouari, S. Benmokhtar, B. Manoun, B. Belhorma, T. Baudin, P. Berthet, D. Solas, R. Haumont, JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2013, 111, 401-408

Microstructure and texture evolution during the ultra grain refinement of the Armco iron deformed by accumulative roll bonding (ARB). E. Bonnot, A.-L. Helbert, F. Brisset, T. Baudin, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 561, 60-66

Microstructure and microtexture evolution with aging treatment in an Al-Mg-Si alloy severely deformed by HPT. A. Loucif, T. Baudin, R. B. Figueiredo, F. Brisset, A.-L. Helbert, R. Chemam, T. G. Langdon, JOURNAL OF MATERIALS SCIENCE, 2013, 48, 4573-4581

An examination of microstructural evolution in a Cu-Ni-Si alloy processed by HPT and ECAP. A. Y. Khereddine, F. H. Larbi, M. Kawasaki, T. Baudin, D. Bradai, T. G. Langdon, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 576, 149-155

In Situ Electron Backscatter Diffraction Investigation of Recrystallization in a Copper Wire. F. Brisset, A.-L. Helbert, T. Baudin, MICROSCOPY AND MICROANALYSIS, 2013, 19, 969-977

Effect of recrystallization and degree of order on the magnetic and mechanical properties of soft magnetic FeCo-2V alloy. B. Nabi, A.-L. Helbert, F. Brisset, G. Andre, T. Waeckerle, T. Baudin, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 578, 215-221

Barkhausen noise measurements give direct observation of magnetocrystalline anisotropy energy in ferromagnetic polycrystals. J. H. Espina-Hernandez, J. A. Perez-Benitez, F. Caleyo, T. Baudin, A.-L. Helbert, J. M. Hallen, JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2013, 46, 392001

Microstructures and textures of a Cu-Ni-Si alloy processed by high-pressure torsion. A. Y. Khereddine, F. H. Larbi, H. Azzeddine, T. Baudin, F. Brisset, A.-L. Helbert, M.-H. Mathon, M. Kawasaki, D. Bradai, T. G. Langdon, JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 574, 361-367

Anisotropic propagating excitations and quadrupolar effects in Tb2Ti2O7. S. Guitteny, J. Robert, J. Ollivier, C. Decorse, P. Steffens, M. Boehm, H. Mutka, I. Mirebeau, S. Petit, Physical Review Letters, 2013, 111, 087201

Magnetic structure in the spin liquid Tb2Ti2O7 induced by a [111] magnetic field: Search for a magnetization plateau. A. P. Sazonov., A. Gukasov, H. Cao, P. Bonville, E. Ressouche, C. Decorse, I. Mirebeau, Physical Review B, 2013, 88, 184428

Evidence of Pd segregation and stabilization at edges of AuPd nanoclusters in the presence of CO: a combined DFT and DRIFT study. B. Zhu, G. Thrimurthulu, L. Delannoy, C. Louis, C. Mottet, J. Creuze, B. Legrand, H. Gusemi, Journal of Catalysis, 2013, 308, 272

Interface effects at a ferromagnetic and ferroelectric junction. Q.-L. Fang, J.-M. Zhang, K.-W. Xu, V. Ji, Thin Solid Films, 2013, 540, 92–95

Thermostability of S30432 shot peened surface layer. K. Zhan, L. C. Xie, C. H. Jiang, V. Ji, Surface Engineering, 2013, VOL 29 NO 1, 61-64

Effect of shot peening on the residual stress and microstructure of duplex stainless steel. Q. Feng, C. Jiang, Z. Xu, L. Xie, V. Ji, Surface & Coatings Technology, 2013, 226, 140–144

Microstructure characterization and deposition mechanism studies of ZrO2 thin films deposited by LI-MOCVD. Z. Chen, N. Prud'Homme, B. Wang, P. Ribot, V. Ji, Surface & Coatings Technology, 2013, 218, 7–16

Stabilization of the tetragonal phase in large columnar zirconia crystals without incorporating dopants. Z. Chen, G. Ji, N. Prud’Homme, A. Addad, V. Ji, J. Chevalier, G. Bernard-Grangere, Scripta Materialia, 2013, 68, 559–562

General compliance transformation relations for all seven crystal systems. Y. Zhang, V. Ji, SCIENCE CHINA Physics, Mechanics & Astronomy, 2013, Vol.56 No.4, 694–700

Ab initio study of iron nanowires encapsulated inside silicon nitride nanotubes. S.-F. Wang, L.-Y. Chen, J.-M. Zhang, Y. Xie, K.-W. Xu, V. Ji, Physica E, 2013, 49, 97–104

The detailed orbital-decomposed electronic structures of tetragonal ZrO2. Y. Zhang, V. Ji, K.-W. Xu, Physica B, 2013, 411, 126–130,

Structural and electronic properties of substitutionally doped armchair silicene nanoribbons. L. Ma, J.-M. Zhang, K.-W. Xu, V. Ji, Physica B, 2013, 425, 66–71

Uniformity of residual stress distribution on the surface of S30432 austenitic stainless steel by different shot peening processes. K. Zhan, C.-H. Jiang, V. Ji, Materials Letters, 2013, 99, 61–64

Electronic structure and magnetismof Ti2FeSi: A first-principles study. Q.-L. Fangi, J.-M. Zhang, K.-W. Xu, V. Ji, Journal of Magnetism and Magnetic Materials, 2013, 345, 171–175

The detailed geometrical and electronic structures of monoclinic zirconia. Y. Zhang, K.-W. Xu, V. Ji, Journal of Physics and Chemistry of Solids, 2013, 74, 518–523

Structural and electronic properties of BeO nanotubes filled with Cu nanowires. Y.-N. Duan, J.-M. Zhang, K.-W. Xu, V. Ji, Eur. Phys. J. B, 2013, 86, 364

Influence of humidity on high temperature oxidation of Inconel 600 alloy: Oxide layers and residual stress study. J. Xiao, N. Prud’Homme, N. Li, V. Ji, Applied Surface Science, 2013, 284, 446– 452

2011

Residual stress gradient analysis with GIXRD on ZrO2 thin films deposited by MOCVD. Z. Chen, N. Prud'Homme, B. Wang, V. Ji, Surface and Coatings Technology, 2011, 206, 405-410