Institut de Chimie Moléculaire et des Matériaux d'Orsay

Mechanical Properties and Texture Evolution of High-Carbon Steel Wires during Wire Drawing: Strand Manufacturing. A. Kisrane-Bouzidi, M. Zidani, M.-C. Nebbar, T. Abid, A.-L. Helbert, F. Brisset, T. Baudin, International Journal of Engineering Research in Africa, 2020, 49, 130-138

Microstructural and textural investigation of an Mg–Dy alloy after hot plane strain compression. F. Guerza-Soualah, H. Azzeddine, T. Baudin, A.-L. Helbert, F. Brisset, D. Bradai, Journal of Magnesium and Alloys, 2020

The deformation and recrystallization behaviour of an Mg-Dy alloy processed by plane strain compression. F. Guerza-Soualah, A. Hanna, H. Azzeddine, A.-L. Helbert, F. Brisset, T. Baudin, D. Bradai, Materials Today Communications, 2020, 24, 101239

Effect of the hot rolling on Goss development and magnetic induction in an advanced soft magnetic Fe–27%Co alloy. B. Nabi, A.-L. Helbert, F. Brisset, T. Waeckerlé, R. Batonnet, T. Baudin, Journal of Alloys and Compounds, 2020, 155149

Alkali magmatism on a carbonaceous chondrite planetesimal. J. Aléon, A. Aléon-Toppani, B. Platevoet, J.-M. Bardintzeff, K. D. Mckeegan, F. Brisset, Proc Natl Acad Sci USA, 2020, 201919550

Effect of TiO2-Nanoparticles on Ni Electrodeposition on Copper Wire. S. Saad, Z. Boumerzoug, A. L. Helbert, F. Brisset, T. Baudin, Metals, 2020, 10

A comprehensive study of the glass/translucent anti-glass/transparent ceramic structural ordering in the Bi2O3Nb2O5–TeO2 system. M. Dolhen, M. Allix, V. Sarou-Kanian, F. Fayon, C. Genevois, S. Chenu, P.-E. Coulon, M. Colas, J. Cornette, J.-R. Duclère, F. Brisset, O. Masson, P. Thomas, G. Delaizir, Acta Materialia, 2020, 189, 73-84

Microstructure of GaAs thin films grown on glass using Ge seed layers fabricated by aluminium induced crystallization. D. Pelati, G. Patriarche, L. Largeau, O. Mauguin, L. Travers, F. Brisset, F. Glas, F. Oehler, Thin Solid Films, 2020, 694, 137737

SPS-assisted synthesis of InGaO3(ZnO)m ceramics, and influence of m on the band gap and the thermal conductivity. S. Préaud, C. Byl, F. Brisset, D. Berardan, Journal of the American Ceramic Society, 2020, 103, 3030-3038

Microstructural peculiarities and textural characteristics of Ni–W sheet alloy after accumulative roll-bonding and annealing. S. Koriche, S. Boudekhani-Abbas, H. Azzeddine, T. Baudin, A.-L. Helbert, F. Brisset, Y. A. Betanda, T. Waeckerlé, D. Bradai, SN Applied Sciences, 2020, 2, 650

Impact of rare-earth elements on the corrosion performance of binary magnesium alloys. H. Azzeddine, A. Hanna, A. Dakhouche, L. Rabahi, N. Scharnagl, M. Dopita, F. Brisset, A.-L. Helbert, T. Baudin, Journal of Alloys and Compounds, 2020, 829, 154569

In-situ EBSD investigation of thermal stability of a 316L stainless steel nanocrystallized by Surface Mechanical Attrition Treatment. Y. Wu, Z. Sun, F. Brisset, T. Baudin, A.-L. Helbert, D. Retraint, Materials Letters, 2020, 263, 127249

GaAs (111) epilayers grown by MBE on Ge (111): Twin reduction and polarity. D. Pelati, G. Patriarche, O. Mauguin, L. Largeau, L. Travers, F. Brisset, F. Glas, F. Oelher, Journal of Crystal Growth, 2019, 519, 84-90

Photocatalytic degradation of organic pollutant with polypyrrole nanostructures under UV and visible light. X. Yuan, D. Floresyona, P.-H. Aubert, T.-T. Bui, S. Remita, S. Ghosh, F. Brisset, F. Goubard, H. Remita, Applied Catalysis B: Environmental, 2019, 242, 284-292

Growth facets of SrIrO3 thin films and single crystals. L. Fruchter, V. Brouet, F. Brisset, H. Moutaabbid, Y. Klein, CrystEngComm, 2019, 21, 3822-3828

Microstructural Evolutions and Mechanical Properties of Drawn Medium Carbon Steel Wire. M. C. Nebbar, M. Zidani, T. Djimaoui, T. Abid, H. Farh, T. Ziar, A.-L. Helbert, F. Brisset, T. Baudin, International Journal of Engineering Research in Africa, 2019, 41, 1-7

Texture analysis of welded 304L pipeline steel. S. Hamza, Z. Boumerzoug, H. Anne-Laure, F. Brisset, T. Baudin, Journal of Metals, Materials and Minerals, 2019, 29, 32-41

Thermal Stability of an Mg–Nd Alloy Processed by High-Pressure Torsion. S. Tighiouaret, R. Lachhab, A. Hanna, H. Azzeddine, Y. Huang, T. Baudin, A.-L. Helbert, F. Brisset, D. Bradai, T. G. Langdon, Advanced Engineering Materials, 2019, 21, 1900801

Optimization of Microstructural Evolution during Laser Cladding of Ni Based Powder on GCI Glass Molds. F. Bourahima, A. L. Helbert, V. Ji, M. Rege, A. Courteaux, F. Brisset, T. Baudin, Key Engineering Materials, 2019, 813, 185-190

Origin of the {111}〈112〉 Cold Rolling Texture Development in a Soft Magnetic Fe-27%Co Alloy. B. Nabi, A.-L. Helbert, H. Azzeddine, D. Bradai, F. Brisset, T. Waeckerlé, V. Aubin, T. Baudin, Journal of Materials Engineering and Performance, 2019, 28, 3767-3776

An investigation of the stored energy and thermal stability in a Cu–Ni–Si alloy processed by high-pressure torsion. H. Azzeddine, Y. Bourezg, A. Khereddine, T. Baudin, A.-L. Helbert, F. Brisset, M. Kawasaki, D. Bradai, T. Langdon, Philosophical Magazine, 2019, 100, 688-712

Effect of alkali cations on the photomagnetic behavior of CoFe Prussian blue analogue nanoparticles embedded in ordered mesoporous silica. L. Altenschmidt, G. Fornasieri, E. Rivière, F. Brisset, R. Saint-Martin, A. Bleuzen, Comptes Rendus Chimie, 2019, 22, 508-515

Facile and efficient Cu(0)-mediated radical polymerisation of pentafluorophenyl methacrylate grafting from poly(ethylene terephthalate) film. T. P. T. Nguyen, N. Barroca-Aubry, D. Dragoe, S. Mazerat, F. Brisset, J.-M. Herry, P. Roger, European Polymer Journal, 2019, 116, 497-507

Femtosecond Laser-Induced Crystallization in Glasses: Growth Dynamics for Orientable Nanostructure and Nanocrystallization. J. Cao, M. Lancry, F. Brisset, L. Mazerolles, R. Saint-Martin, B. Poumellec, Crystal Growth & Design, 2019, 19, 2189-2205

Cube orientation bands observed in largely deformed Al-Sc alloys containing shearable precipitates. C.-Y. Dan, Z. Chen, G. Ji, S.-Y. Zhong, J. Li, X.-R. Li, F. Brisset, G.-A. Sun, H.-W. Wang, V. Ji, Scripta Materialia, 2019, 166, 139-143

Study of the microstructure and texture heterogeneities of Fe-48wt%Ni alloy severely deformed by equal channel angular pressing. R. Lachhab, M. A. Rekik, H. Azzeddine, T. Baudin, A.-L. Helbert, F. Brisset, M. Khitouni, JOURNAL OF MATERIALS SCIENCE, 2019, 54, 4354-4365

Evaluating the textural and mechanical properties of an Mg-Dy alloy processed by high-pressure torsion. A. Hanna, H. Azzeddine, R. Lachhab, T. Baudin, A.-L. Helbert, F. Brisset, Y. Huang, D. Bradai, T. G. Langdon, JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 778, 61-71

Investigation of microstructure and texture evolution of a Mg/Al laminated composite elaborated by accumulative roll bonding. W. Habila, H. Azzeddine, B. Mehdi, K. Tirsatine, T. Baudin, A.-L. Helbert, F. Brisset, S. Gautrot, M.-H. Mathon, D. Bradai, MATERIALS CHARACTERIZATION, 2019, 147, 242-252

On the evaluation of dislocation densities in pure tantalum from EBSD orientation data. C. Fressengeas, B. Beausir, C. Kerisit, A.-L. Helbert, T. Baudin, F. Brisset, M.-H. Mathon, R. Besnard, N. Bozzolo, MATERIAUX & TECHNIQUES, 2019, 106

Photonic Titanium dioxide film obtained from hard template with chiral nematic structure for environmental application. L. Chunyu, E. Paineau, F. Brisset, S. Franger, C. Colbeau-Justin, M. Ghazzal, Catalysis Today, 2019, 335, 409-417

On the groove pressing of Ni-W alloy: microstructure, texture and mechanical properties evolution. S. Koriche, S. Boudekhani-Abbas, H. Azzeddine, K. Abib, A.-L. Helbert, F. Brisset, T. Baudin, D. Bradai, KOVOVE MATERIALY-METALLIC MATERIALS, 2018, 56, 313-323

Microstructure, texture and mechanical properties of Ni-W alloy after accumulative roll bonding. S. Boudekhani-Abbas, H. Azzeddine, K. Tirsatine, T. Baudin, A.-L. Helbert, F. Brisset, B. Alili, D. Bradai, Journal of Materials Engineering and Performance, 2018, 27, 5561-5570

Development of radioactive beams at ALTO: Part 1. Physicochemical comparison of different types of UCx targets using a multivariate statistical approach. J. Guillot, S. Tusseau-Nenez, B. Roussière, N. Barré-Boscher, F. Brisset, S. Denis, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2018, 433, 60-68

Nanoparticles with high payloads of pipemidic acid, a poorly soluble crystalline drug: drug-initiated polymerization and self-assembly approach. E. Pancani, M. Menendez-Miranda, A. Pastor, F. Brisset, M.-F. Bernet-Camard, D. Desmaële, R. Gref, Acta Pharmaceutica Sinica B, 2018, 8, 420-431

Organic and mineralogic heterogeneity of the Paris meteorite followed by FTIR hyperspectral imaging. Z. Dionnet, A. Aleon-Toppani, D. Baklouti, F. Borondics, F. Brisset, Z. Djouadi, C. Sandt, R. Brunetto, Meteoritics & Planetary Science, 2018, 1, 1-16

An EBSD analysis of Fe-36%Ni alloy processed by HPT at ambient and a warm temperature. K. Tirsatine, H. Azzeddine, Y. Huang, T. Baudin, A.-L. Helbert, F. Brisset, D. Bradai, T.-G. Langdon, Journal of Alloys and Compounds, 2018, 753, 46-53

Microstructure and phase constitution in the bonding zone of explosively welded tantalum and stainless steel sheets. H. Paul, M.-M. Miszczyk, R. Chulist, M. Prazmowski, J. Morgiel, A. Galka, M. Faryna, F. Brisset, Materials & Design, 2018, 153, 177-189

Nd 3+ doped transparent tellurite ceramics bulk lasers. M. Dolhen, M. Tanaka, V. Couderc, S. Chenu, G. Delaizir, F. Brisset, P. Thomas, J.-R. Duclère, Scientific Reports, 2018, 8, 4640-4649

Pulse energy dependence of refractive index change in lithium niobium silicate glass during femtosecond laser direct writing. J. Cao, B. Poumellec, F. Brisset, M. Lancry, Optics Express, 2018, 26, 7460-7474

Cold rolling texture evolution of TiB2 particle reinforced Al-based composites by Neutron Diffraction and EBSD analysis. C.-Y. Dan, Z. Chen, M.-H. Mathon, G. Ji, L.-W. Li, Y. Wu, F. Brisset, L. Guo, H.-W. Wang, V. Ji, Materials Characterization, 2018, 136, 293-301

Accumulative roll bonding at room temperature of a bi-metallic AA5754/AA6061 composite: Impact of strain path on microstructure, texture and mechanical properties. K. Verstraete, H. Azzeddine, A.-L. Helbert, F. Brisset, D. Bradai, T. Baudin, Advanced Engineering Materials, 2018, 20, 1700285

Microstructure study of cold rolling nanosized in-situ TiB2 particle reinforced Al composites. C.-Y. Dan, Z. Chen, G. Ji, S.-H. Zhong, Y. Wu, F. Brisset, H.-W. Wang, V. Ji, Materials & Design, 2017, 130, 357-365

Formation processes of theu-Al70Cu20Fe10phase synthesized by SPS technique. A. Joseph, V. Gauthier-Brunet, J.-P. Monchoux, A. Joulain, F. Brisset, C. Thomas, J. Douin, S. Dubois, Journal of Alloys and Compounds, 2017, 699, 1157-1165

Kinetics and crystal texture improvements on thin germanium layers obtained by aluminium induced crystallization using oxygen plasma. D. Pelati, O. Mauguin, L. Largeau, F. Brisset, F. Glas, F. Oehler, Surface & Coatings Technology, 2017, 243, 121-126

In situ optical monitoring of new pathways in the metal induced crystallization of amorphous Ge. D. Pelati, G. Patriarche, O. Mauguin, L. Largeau, F. Brisset, F. Glas, F. Oehler, Crystal Growth & Design, 2017, 17, 5783–5789

Ballistic edge states in Bismuth nanowires revealed by SQUID interferometry. A. Murani, A. Kasumov, F. Brisset, S. Guéron, NATURE COMMUNICATIONS, 2017, 8, 1-7

Highly Active Poly(3-hexylthiophene) Nanostructures for Photocatalysis under Solar Light. D. Floresyona, F. Goubard, P.-H. Aubert, I. Lampre, J. Mathurin, P. Beaunier, F. Brisset, S. Remita, H. Remita, Appl. Catalysis B: Environmental, 2017, 209, 23-32

Abnormal elemental redistribution in silicate glasses irradiated by ultrafast laser. X. Zhang, X. He, Q. Liu, B. Poumellec, M. Lancry, F. Brisset, Journal of Alloys and Compounds, 2017, 727, 444-448

Modifications in lithium niobium silicate glass by femtosecond laser direct writing: morphology, crystallization, and nanostructure. J. Cao, L. Mazerolles, M. Lancry, F. Brisset, B. Poumellec, JOSA B, 2017, 34, 160-168

On the recrystallization and texture of Fe-36%Ni alloy after accumulative roll bonding and annealing at 600°C. K. Tirsatine, H. Azzeddine, T. Baudin, A.-L. Helbert, F. Brisset, D. Bradai, Materials Engineering - Materiálové inžinierstvo (MEMI), 2017, 24, 56-66

Neutron diffraction versus EBSD analysis of the texture in Fe-36%Ni alloy after accumulative roll bonding. H. Azzeddine, K. Tirsatine, T. Baudin, A.-L. Helbert, M.-H. Mathon, F. Brisset, D. Bradai, INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2017, 24, 35-44

On the stored energy evolution after accumulative roll-bonding of invar alloy. H. Azzeddine, K. Tirsatine, T. Baudin, M.-H. Mathon, A.-L. Helbert, F. Brisset, D. Bradai, MATERIALS CHEMISTRY AND PHYSICS, 2017, 201, 408-415

Benefits of energetic ion bombardment for tailoring stress and microstructural evolution during growth of Cu thin films. F. Cemin, G. Abadias, T. Minea, C. Furgeaud, F. Brisset, D. Solas, D. Lundin, Acta Materialia, 2017, 141, 120-130

β-Cyclodextrin-Mediated Enantioselective Photochemical Electrocyclization of 1,3-Dihydro-2H-azepin-2-one. A. T. Mansour, J. Buendia, J. Xie, F. Brisset, S. Robin, D. Naoufal, O. Yazbeck, D. J. Aitken, J. Org. Chem., 2017, 82, 9832-9836

Microstructure study of cold rolling nanosized in-situ TiB2 particle reinforced Al composites. C.-Y. Dan, Z. Chen, G. Ji, S.-H. Zhong, Y. Wu, F. Brisset, H.-W. Wang, V. Ji, Materials & Design, 2017, 130, 357-365

Spatially controlled positioning of coordination polymer nanoparticles onto heterogeneous nanostructured surfaces. V. Trannoy, M. Faustini, D. Grosso, F. Brisset, P. Beaunier, E. Riviere, M. Putero, A. Bleuzen, Nanoscale, 2017, 9, 5234-5243

Conformational effects through hydrogen bonding in a constrained γ-peptide template: from intra-residue 7-membered rings to a gel-forming sheet structure. H. Awada, C. M. Grison, F. Charnay-Pouget, J.-P. Baltaze, F. Brisset, R. Guillot, S. Robin, A. Hachem, N. Jaber, D. Naoufal, O. Yazbeck, D. J. Aitken, J. Org. Chem., 2017, 82, 4819–4828

Experimental study of microstructure changes due to low cycle fatigue of a steel nanocrystallised by Surface Mechanical Attrition Treatment (SMAT). Z. Sun, D. Retraint, T. Baudin, A.-L. Helbert, F. Brisset, M. Chemkhi, J. Zhou, P. Kanoute, Materials Characterization, 2017, 124, 117-121

Nanoscale Phase Separation in Lithium Niobium Silicate Glass by Femtosecond Laser Irradiation. J. Cao, B. Poumellec, L. Mazerolles, F. Brisset, A.-L. Helbert, S. Surble, X. He, M. Lancry, Journal of the American Ceramic Society, 2017, 100, 115-124

Nanogratings formation in multicomponent silicate glasses. M. Lancry, F. Zimmerman, R. Desmarchelier, J. Tian, F. Brisset, S. Nolte, B. Poumellec, Applied Physics B, 2016, 122, 66

Study of uranium oxide milling in order to obtain nanostructured UCxtarget. J. Guillot, S. Tusseau-Nenez, B. Roussiere, N. Barre-Boscher, F. Brisset, M. Cheikh Mhamed, C. Lau, S. Nowak, Nuclear Instruments and Methods in Physics Research B, 2016, 374, 116-120

Scalable and Formable Tellurite-Based Transparent Ceramics for Near Infrared Applications. A. Bertrand, J. Carreaud, S. Chenu, M. Allix, E. Veron, J.-R. Duclere, Y. Launay, T. Hayakawa, C. Genevois, F. Brisset, F. Celarie, P. Thomas, G. Delaizir, Adv. Optical Mater., 2016, 4, 1482-1486

Links between morphology and function of the pollen wall: an experimental approach. A. Matamoro-Vidal, C. Raquin, F. Brisset, H. Colas, B. Izac, B. Albert, P.-H. Gouyon, Botanical Journal of the Linnean Society, 2016, 180, 478-490

Giant Amplification of Photoswitching by aFew Photons in FluorescentPhotochromic Organic Nanoparticles. J. Su, T. Fukaminato, J.-P. Placial, T. Onodera, R. Suzuki, H. Oikawa, A. Brosseau, F. Brisset, R. Pansu, N. Keitaro, R. Metivier, Angew. Chem. Int. Ed., 2016, 55, 3662-3666

Tunable angular-dependent second-harmonic generation in glass by controlling femtosecond laser polarization. J. Cao, B. Poumellec, F. Brisset, A.-L. Helbert, M. Lancry, Journal of the Optical Society of America B, 2016, 33, 741-747

Form birefringence induced in multicomponent glass by femtosecond laser direct writing. J. Cao, L. Mazerolles, M. Lancry, D. Solas, F. Brisset, B. Poumellec, Optics Letters, 2016, 41, 2739-2742

Thermal stability of Cu-Cr-Zr alloy processed by equal-channel angular pressing. K. Abib, H. Azzeddine, K. Tirsatine, T. Baudin, A.-L. Helbert, F. Brisset, B. Alili, D. Bradai, MATERIALS CHARACTERIZATION, 2016, 118, 527-534

Additive layer manufacturing of titanium matrix composites using the direct metal deposition laser process. S. Pouzet, P. Peyre, C. Gorny, O. Castelnau, T. Baudin, F. Brisset, C. Colin, P. Gadaud, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 677, 171-181

Form birefringence induced in multicomponent glass by femtosecond laser direct writing. J. Cao, L. Mazerolles, M. Lancry, F. Brisset, B. Poumellec, OPTICS LETTERS, 2016, 41, 2739 2742

An evaluation of high temperature tensile properties for a magnesium AZ31 alloy processed by high-pressure torsion. Y. Huang, P.-H.-R. Pereira, R.-B. Figueiredo, T. Baudin, A.-L. Helbert, F. Brisset, T.-G. Langdon, LETTERS ON MATERIALS-PIS MA O MATERIALAKH, 2015, 5, 341-346

Angular Dependence of the Second Harmonic Generation Induced by Femtosecond Laser Irradiation in Silica-Based Glasses: Variation with Writing Speed and Pulse Energy. J. Cao, B. Poumellec, F. Brisset, A.-L. Helbert, M. Lancry, World Journal of Nano Science and Engineering, 2015, 5, 96-106

In the heart of femtosecond laser induced nanogratings: from porous nanoplanes to form birefringence. R. Desmarchelier, B. Poumellec, F. Brisset, S. Mazerat, M. Lancry, World Journal of Nano Science and Engineering, 2015, 5, 115-125

The effects of l-cysteine on the inhibition and accelerated dissolution processes of zinc metal. V. Shkirskiy, P. Keil, H. Hintze-Bruening, F. Leroux, F. Brisset, K. Ogle, P. Volovitch, Corrosion Science, 2015, 100, 101-112

New Transparent Glass-Ceramics Based on the Crystallization of “Anti-glass” Spherulites in the Bi2O3–Nb2O5–TeO2 System. A. Bertrand, J. Carreaud, G. Delaizir, M. Shimoda, J.-R. Duclère, M. Colas, M. Belleil, T. Hayakawa, C. Genevois, E. Veron, M. Allix, S. Chenu, F. Brisset, P. Thomas, Cryst. Growth Des., 2015, 15, 5086-5096

Copper Refinement from Anode to Cathode and then to Wire Rod: Effects of Impurities on Recrystallization Kinetics and Wire Ductility. A.-L. Helbert, A. Moya, T. Jil, M. Andrieux, M. Ignat, F. Brisset, T. Baudin, Microscopy and Microanalysis, 2015, 21, 1153-1166

Systematic control of structural changes in GeO2 glass induced by femtosecond laser direct writing. T. Asai, Y. Shimotsuma, T. Kurita, A. Murata, S. Kubota, M. Sakakura, K. Miura, F. Brisset, B. Poumellec, M. Lancry, Journal of the American Ceramic Society, 2015, 98, 1471-1477

Formation of annealing twins during primary recrystallization of two low stacking fault energy Ni-based alloys. W. Wang, S. Lartigue-Korinek, F. Brisset, A.-L. Helbert, J. Bourgon, T. Baudin, JOURNAL OF MATERIALS SCIENCE, 2015, 50, 2167-2177

Microstructure and texture evolution in a Cu-Ni-Si alloy processed by equal-channel angular pressing. F. H. Larbi, H. Azzeddine, T. Baudin, M.-H. Mathon, F. Brisset, A.-L. Helbert, M. Kawasaki, D. Bradai, T. G. Langdon, JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 638, 88-94

Microstructure, mechanical properties and texture of an AA6061/AA5754 composite fabricated by cross accumulative roll bonding. K. Verstraete, A.-L. Helbert, F. Brisset, A. Benoit, P. Poniard, T. Baudin, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 640, 235-242

Copper Refinement from Anode to Cathode and then to Wire Rod: Effects of Impurities on Recrystallization Kinetics and Wire Ductility. A.-L. Helbert, A. Moya, T. Jil, M. Andrieux, M. Ignat, F. Brisset, T. Baudin, MICROSCOPY AND MICROANALYSIS, 2015, 21, 1153-1166

Effect of Annealing Atmosphere on the Recrystallized Texture and Abnormal Grain Growth of Ni-5% W Alloy Sheets. Y. A. Betanda, A.-L. Helbert, F. Brisset, T. Waeckerle, T. Baudin, ADVANCED ENGINEERING MATERIALS, 2015, 17, 1568-1572

Nanocrystals of Fe(phen)2(NCS)2 and the size-dependent spin-crossover characteristics. J. Laisney, A. Tissot, G. Molnar, L. Rechignat, E. Riviere, F. Brisset, A. Bousseksou, M.-L. Boillot, Dalton Trans., 2015, 44, 17302-17311

Inter-laboratory comparison of a WDS–EDS quantitative X-ray microanalysis of a metallic glass. P. Jonnard, F. Brisset, R. Florence, G. Wille, J. Ruste, X-Ray spectrometry, 2014, 44, 24-29

On the cathodic dissolution of Al and Al alloys. M. Serdechnova, P. Volovitch, F. Brisset, K. Ogle, Electrochimica Acta, 2014, 124, 9-16

PEDOTnanostructures synthesized in hexagonal mesophases. S. Ghost, H. Remita, L. Ramos, A. Dazzi, A. Deniset-Besseau, P. Beaunier, F. Goubard, P.-H. Aubert, F. Brisset, S. Remita, New J. Chem, 2014, 38, 1106-1115

One-step photoinscription of asymmetrically oriented fresnoite-type crystals in glass by ultrafast laser. X. He, B. Poumellec, Q. Liu, F. Brisset, M. Lancry, Optics letters, 2014, 39, 5423-5426

Size-controlled oriented crystallization in SiO 2-based glasses by femtosecond laser irradiation. X. He, C. Fan, B. Poumellec, Q. Liu, H. Zeng, F. Brisset, G. Chen, X. Zhao, M. Lancry, JOSA B, 2014, 31, 376-381

Influence of stored energy on twin formation during primary recrystallization. W. Wang, F. Brisset, A.-L. Helbert, D. Solas, I. Drouelle, M. H. Mathon, T. Baudin, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 589, 112-118

CHARACTERIZATION OF EXPLOSIVE WELD JOINTS BY TEM AND SEM/EBSD. H. Paul, J. Morgiel, T. Baudin, F. Brisset, M. Prazmowski, M. Miszczyk, ARCHIVES OF METALLURGY AND MATERIALS, 2014, 59, 1129-1136

Effect of long range order on mechanical properties of partially recrystallized Fe49Co-2V alloy. B. Nabi, A.-L. Helbert, F. Brisset, R. Batonnet, G. Andre, T. Waeckerle, T. Baudin, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 592, 70-76

Influence of Sulfur on the Recrystallization and 100< 001 > Cube Texture Formation in Fe48%Ni Alloys Tapes. Y. A. Betanda, A.-L. Helbert, F. Brisset, M. Wehbi, M.-H. Mathon, T. Waeckerle, T. Baudin, ADVANCED ENGINEERING MATERIALS, 2014, 16, 933-939

Measurement of stored energy in Fe-48%Ni alloys strongly cold-rolled using three approaches: Neutron diffraction, Dillamore and KAM approaches. Y. A. Betanda, A.-L. Helbert, F. Brisset, M.-H. Mathon, T. Waeckerle, T. Baudin, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 614, 193-198

Texture and microstructure evolution of Fe-Ni alloy after accumulative roll bonding. K. Tirsatine, H. Azzeddine, T. Baudin, A.-L. Helbert, F. Brisset, B. Alili, D. Bradai, JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 610, 352-360

Texture evolution of an Fe-Ni alloy sheet produced by cross accumulative roll bonding. H. Azzeddine, K. Tirsatine, T. Baudin, A.-L. Helbert, F. Brisset, D. Bradai, MATERIALS CHARACTERIZATION, 2014, 97, 140-149

Monte Carlo simulation of primary recrystallization and annealing twinning. W. Wang, A.-L. Helbert, F. Brisset, M. H. Mathon, T. Baudin, ACTA MATERIALIA, 2014, 81, 457-468

Towards bottom-up nanopatterning of Prussian blue analogues. V. Trannoy, M. Faustini, D. Grosso, S. Mazerat, F. Brisset, A. Dazzi, A. Bleuzen, Beilstein Journal of Nanotechnology, 2014, 5, 1933-1943

A nickel dimethyl glyoximato complex to form nickel based nanoparticles for electrocatalytic H2 production. S. Cherdo, S. E. Ghachtouli, M. Sircoglou, F. Brisset, M. Orio, A. Aukauloo, Chemical Communications, 2014, 50, 13514-13516