Vincent Ji
Teaching: Co-Head of Materials Science Department (from 2007 to 2015), Professional Education Responsible (from 2015 to 2019) of PolyTech Paris-Saclay, Co-Head of Department "Materials: Mechanics and Energy" (from 2019 to 2022), The Engineering Institute of Université Paris-Saclay (https://www.polytech.universite-paris-saclay.fr/), intervention on
* Atomic defects and diffusion * High temperature corrosion
* Composite materials * X-ray diffraction and residual stress analysis
* Coatings and thin films for mechanical applications * Residual stress and their determination
Main Research Topics in ICMMO/SP2M – Associated Research Institute with CNRS (Centre National des Recherche Scientifiques) at Université Paris-Saclay (https://www.icmmo.u-psud.fr/fr)
With more then 270 papers in international journals, 120 contributions in conferences, direction or co-direction of 23 Ph.D thesis, participation of 20 another Ph.D thesis with common publications, direction of 23 Masters thesis, the main scientific research themes are
* Methodology development of X-ray diffraction residual stress analysis in heterogeneous materials (materials with properties gradient, multiphase materials etc…);
* Study of relationship between microstructure evolution, material processing and internal stress (surface science, thin films, surface treatment etc…) by experimentation and by numerical modelization
* Oxidation kinetics and diffusion mechanism of alloys and metals at high temperature
All the research works are realized in collaboration with different academic or industrial partners in France, in Europe and in Asia (China and Japan)
University Degrees :
2003, HDR (Habilitation à diriger des Recherches) « Physics Science », Université Lille 1 (https://umet.univ-lille.fr/), under the direction of Professor Jacques Foct
1989, PhD Thesis « Mécanique et Matériaux », Arts et Métiers ParisTech (Paris,https://www.artsetmetiers.fr/fr ), under the direction of Professor Gérard Maeder and Jean-Lou Lebrun
1986, Master « Métallurgie Spéciale et Matériaux » INSTN (Saclay, https://instn.cea.fr/formation/master-materiaux-pour-lenergie-et-les-transports/ ) -Université Paris-Saclay (Orsay), under the direction of Professor Anne-Marie Huntz
1984, Engineer «Materials Science and Engineering », Beijing University of Aeronautics and Astronautics (Beijing, China, http://www.mse.buaa.edu.cn/)
Professional Cursus
* Full Professor (from 2007 to 2016) and Distinguished Professor since 2016 at Université Paris-Saclay/ICMMO (Institut de Chimie Moléculaire et Matériaux d’ORSAY) for scientifique research and with PolyTech Paris-Saclay (The Engineering Institute of Univ. Paris-Saclay) for teaching
* 2004-2015, External Collaborator with Laboratoire Léon-Brillouin (http://www-llb.cea.fr/index.php), French Neutron facility co-managed by CNRS (Centre National des Recherches Scientifiques) and CEA (Commissariat d’Energie Atomic) at Saclay for residual stress analysis by Neutron
* October 1994 to July 2007, Assistant Professor (maître de conférences) at Arts et Métiers ParisTech (Ecole Nationale Supérieure d’Arts et Métiers), Paris
* October 1991- September 1994: Research Engineer at SERAM, Paris
* September 1989-September 1991: Assistant at Arts et Métiers ParisTech, Paris
ORCID ID: https://orcid.org/my-orcid?orcid=0000-0003-1979-7323
https://scholar.google.fr/citations?user=CCuGUssAAAAJ
Recent publications
Effect of interface optimization and thermal cycling on thermal conductivity of laminated Cu/GO/Cu composite foils prepared by ultrasonic assisted electrodeposition and electrophoresis method. J. Cao, K. Zhan, J. Liu, B. Zhao, V. Ji, Materials Characterization, 2024, 113888
Enhancement of fatigue properties of selective laser melting fabricated TC4 alloy by multiple shot peening treatments. M. Chen, W. Deng, H. Liu, R. Wang, M. Wang, Y. Duan, C. Jiang, V. Ji, International Journal of Fatigue, 2024, 108215
Microstructural characterization and wear performance of shot-peened TA15 titanium alloy fabricated by SLM. Y. Ang, Y. Wenliang, Z. Wenlong, L. Wenbo, V. Ji, C. Jiang, Materials Characterization, 2024, 113747
Effect of laser shock peening on surface integrity and tensile fatigue behavior of TB8 bolts. Y. Zhang, X. Jian, F. Xia, D. Shi, L. Wu, L. Liu, V. Ji, Engineering Failure Analysis, 2024, 157, 107968
Contact Fatigue Behavior Evolution of 18CrNiMo7-6 Gear Steel Based on Surface Integrity. L. Wu, Y. Lv, Y. Zhang, A. Li, V. Ji, Metals, 2023, 13, 1605
Investigation on microstructure and tribological performances of electrodeposited Ni-W-Y2O3 composite coatings. S. Xing, W. Zhu, S. You, W. Yu, C. Jiang, V. Ji, Journal of Alloys and Compounds, 2023, 965, 171397
The synthesis and mechanism of superhydrophobic coatings with multifunctional properties on aluminum alloys surface: a review. Q. Yang, J. Cao, R. Ding, K. Zhan, Z. Yang, B. Zhao, Z. Wang, V. Ji, Progress in Organic Coatings, 2023, 183, 107786
Microstructure, properties and synergetic effect of graphene oxide-functionalized carbon nanotubes hybrid reinforced copper matrix composites prepared by DC electrodeposition. J. Cao, Q. Yang, L. Zhou, H. Chen, K. Zhan, J. Liu, R. Ding, S. You, B. Zhao, V. Ji, Carbon, 2023, 212, 118157
Surface integrity and tribological behavior of 17Cr2Ni2MoVNb steel under combined carburizing treatment and ultrasonic rolling. Y. Zhang, L. Wu, D. Shi, Z. Wang, H. Jin, L. Liu, S. Qu, V. Ji, Surface and Coatings Technology, 2023, 461, 129371
The microstructural features and strengthening mechanisms of Mg-Al-Zn-Ca-(RE) extruded alloys having high-volume fractions of second-phase particles. F. Wang, N. Dang, J. Chen, J. Li, T. Hu, W. Xiao, R. Zheng, V. Ji, C. Ma, Materials Science and Engineering: A, 2023, 868, 144765
Microstructure Evolution and Hardness Improvement of WC-Co Composites Sintered with Fe Substituting Part of Co Binder. X. Li, J. Zhang, Q. Zhang, X. Zhang, V. Ji, J. Liu, Coatings, 2023, 13
Surface integrity and bending fatigue behavior of aeronautic gear steel under combined carburized treatment and shot peening. Y. Zhang, J. Wang, L. Wu, Z. Wang, L. Liu, V. Ji, S. Qu, International Journal of Fatigue, 2023, 169, 107488
Erosion-corrosion behaviour of shot peening treated nickel-aluminium bronze in simulated sand-containing seawater. C. Wang, X. Xiong, L. Yang, Y. Hong, S. She, H. Zhang, H. Liu, V. Ji, M. Li, Corrosion Science, 2023, 211, 110908
Investigation on the Evolution of Residual Stress in Ultrasonic Surface Rolling Treatment-Processed 18CrNiMo7-6 Alloy Steel. Z. Liu, H. Zhao, C. Zhang, Z. He, V. Ji, Transactions of the Indian Institute of Metals, 2023
Formation of a joint between deposited and base metals during laser cladding of a nickel-based powder onto a copper-based alloy. F. Bourahima, T. Baudin, M. Rege, V. Ji, F. Brisset, A. Zavdoveev, A.-L. Helbert, The Paton Welding Journal, 2022, 4, 26-33
Effect of Mo and C Additions on Eta Phase Evolution of WC-13Co Cemented Carbides. X. Li, X. Zhang, J. Zhang, Q. Zhang, V. Ji, J. Liu, Coatings, 2022, 12, 1993
Surface characteristic and corrosion resistance of different plasma-sprayed coatings (Zn, Al6061and Zn/23Al) on S960 high strength steel with subsequent micro-shot peening. J. Zheng, K. Li, Y. Zhang, K. Zhan, Z. Yang, B. Zhao, Z. Wang, V. Ji, Surface and Coatings Technology, 2022, 451, 129046
Phase transformations mechanism in commercially pure titanium subjected to multiple laser shock peening. L. Li, W. Jia, V. Ji, Surface and Coatings Technology, 2022, 450, 129010
Effect of laser shock peening on α→ω phase transformation in high-purity titanium. L. Li, W. Jia, V. Ji, Vacuum, 2022, 206, 111510
Modified Johnson–Cook Constitutive Model of 18CrNiMo7-6 Alloy Steel under Ultrasonic Surface Burnishing Process. Z. Liu, H. Zhao, J. Li, Z. Niu, V. Ji, Journal of Materials Engineering and Performance, 2022, 32, 4022-4030
Surface characteristics and stress corrosion behavior of AA 7075-T6 aluminum alloys after different shot peening processes. L. Bao, K. Li, J. Zheng, Y. Zhang, K. Zhan, Z. Yang, B. Zhao, V. Ji, Surface and Coatings Technology, 2022, 440, 128481
Surface characteristic and wear resistance of S960 high-strength steel after shot peening combing with ultrasonic sprayed graphene oxide coating. Z. Yang, J. Zheng, K. Zhan, C. Jiang, V. Ji, Journal of Materials Research and Technology, 2022, 18, 978-689
Effect of Ti microparticles on the microstructure and properties of Ni-Ti composite coating prepared by electrodeposition. L. Wang, J. Ren, Y. Zhao, V. Ji, H. Liu, M. Liu, Z. Wang, C. Jiang, Z. Wang, Journal of Alloys and Compounds, 2022, 908, 164313
Kinetics and energetics of room-temperature microstructure in nanocrystalline Cu films: The grain-size dependent intragrain strain energy. Z. Chai, X. Huang, Z. Yu, V. Ji, C. Jiang, X. Chen, Journal of Applied Physics, 2022, 131, 055301
Tribological Behavior and Corrosion Resistance of S30432 Steel after Different Shot Peening Processes. K. Zhan, Y. Zhang, S. Zhao, Z. Yang, B. Zhao, V. Ji, Journal of Materials Engineering and Performance, 2022, 31, 1250-1258
The synergistic role of Ti microparticles and CeO2 nanoparticles in tailoring microstructures and properties of high-quality Ni matrix nanocomposite coating. L. Wang, S. Xing, Z. Shen, H. Liu, C. Jiang, V. Ji, Y. Zhao, Journal of Materials Science & Technology, 2022
Mechanism of Blunt Punching Tools: Influence on Deformation and Residual Stress Distribution. W. Wang, X. Fang, X. Wang, M. Andrieux, V. Ji, Metals, 2021, 11, 2029
Surface characteristic and wear resistance of QT-700-2 nodular cast iron after laser quenching combing with shot peening treatment. K. Zhan, Y. Zhang, L. Bao, Z. Yang, B. Zhao, V. Ji, Surface and Coatings Technology, 2021, 423, 127589
Surface residual stress and microstructure evolutions of Hastelloy X alloy after severe shot peening. M. Chen, S. Xing, J. Li, J. He, Y. Lu, C. Jiang, V. Ji, Vacuum, 2021, 187, 110136
Theoretical analysis and performance prediction on modified surface layer caused by ultrasonic surface rolling. Z. Liu, C. Zhang, H. Zhao, V. Ji, D. Wang, The International Journal of Advanced Manufacturing Technology, 2021, 113, 1307-1330
Unveiling the Residual Stresses, Local Micromechanical Properties and Crystallographic Texture in a Ti-6Al-4V Weld Joint. B. Mehdi, R. Badji, V. Ji, B. Alili, D. Bradai, W. Bedjaoui, F. Deschaux-Beaume, F. Brisset, Acta Metallurgica Sinica (English Letters), 2021, 34, 997-1006
Multi-Scale Characterization by Neutronography and Electron Diffraction of Ni Coating on Cu-Ni-Al or Cast-Iron Glass Molds after Laser Cladding. F. Bourahima, A. L. Helbert, F. Ott, V. Ji, M. Rege, F. Brisset, A. Courteaux, T. Baudin, Materials Science Forum, 2021, 1016, 297-302
Toughening effects of Mo and Nb addition on impact toughness and crack resistance of titanium alloys. S. Huang, Q. Zhao, Y. Zhao, C. Lin, C. Wu, W. Jia, C. Mao, V. Ji, Journal of Materials Science & Technology, 2021, 79, 147-164
Microstructure evolution and mechanical properties of a lamellar near-α titanium alloy treated by laser shock peening. W. Jia, Y. Zan, C. Mao, S. Li, W. Zhou, Q. Li, S. Zhang, V. Ji, Vacuum, 2021, 184, 109906
Effects of ultrasonic surface rolling on fretting wear behaviors of a novel 25CrNi2MoV steel. Y. Zhang, L. Huang, F. Lu, S. Qu, V. Ji, X. Hu, H. Liu, Materials Letters, 2021, 284, 128955
Effect of stress shot peening on the residual stress field and microstructure of nanostructured Mg-8 Gd-3 Y alloy. H. Liu, X. Wei, S. Xing, L. Wang, W. Zhu, C. Jiang, V. Ji, K. Zhan, Journal of Materials Research and Technology, 2021, 10, 74-83
Residual Stresses and Microstructural Features of Rotary-Friction-Welded from Dissimilar Medium Carbon Steels. E. Priymak, Z. Boumerzoug, A. Stepanchukova, V. Ji, Physics of Metals and Metallography, 2020, 121, 1339-1346
Microstructure evolution and residual stress distribution of nanostructured Mg-8Gd-3Y alloy induced by severe shot peening. H. Liu, W. Zhu, C. Jiang, M. Guagliano, S. Xing, L. Wang, V. Ji, K. Zhan, Surface and Coatings Technology, 2020, 404, 126465
Mechanical properties of CoCrCuFeNi multi-principal element alloy thin films on Kapton substrates. C.-H. Li, R. Dedoncker, L.-W. Li, F. Sedghgooya, F. Zighem, V. Ji, D. Depla, P. Djemia, D. Faurie, Surface and Coatings Technology, 2020, 402, 126474
Microstructures and rolling contact fatigue behaviors of 17Cr2Ni2MoVNb steel under combined ultrasonic surface rolling and shot peening. Y. Zhang, S. Qu, F. Lu, F. Lai, V. Ji, H. Liu, X. Li, International Journal of Fatigue, 2020, 141, 105867
Influence of Y2O3 nanoparticles on microstructures and properties of electrodeposited Ni–W–Y2O3 nanocrystalline coatings. S. Xing, L. Wang, C. Jiang, H. Liu, W. Zhu, V. Ji, Vacuum, 2020, 181, 109665
Improved wear properties of NiTi nanocomposite coating with tailored spatial microstructures by extra adding CeO2 nanoparticles. L. Wang, S. Xing, H. Liu, C. Jiang, V. Ji, Surface and Coatings Technology, 2020, 399, 126119
Determination of surface mechanical property and residual stress stability for shot-peened SAF2507 duplex stainless steel by in situ X-ray diffraction stress analysis. M. Chen, S. Xing, H. Liu, C. Jiang, K. Zhan, V. Ji, Journal of Materials Research and Technology, 2020, 9, 7644-7654
Evaluation of Mechanical Behavior and Surface Morphology of Shot-Peened Ti-6Al-4V Alloy. Y. Wen, P. Liu, L. Xie, Z. Wang, L. Wang, W. Lu, C. Jiang, V. Ji, Journal of Materials Engineering and Performance, 2020, 29, 182-190
Analytical modeling and experimental verification of surface roughness in the ultrasonic-assisted ball burnishing of shaft targets. Z. Liu, Q. Dai, J. Deng, Y. Zhang, V. Ji, The International Journal of Advanced Manufacturing Technology, 2020, 107, 3593-3613
Effect of shot peening on residual stress distribution and tribological behaviors of 17Cr2Ni2MoVNb steel. Y. Zhang, F. Lai, S. Qu, V. Ji, H. Liu, X. Li, Surface and Coatings Technology, 2020, 386, 125497
Atomic-scale investigation of the interface precipitation in a TiB2 nanoparticles reinforced Al–Zn–Mg–Cu matrix composite. Y. Ma, A. Addad, G. Ji, M.-X. Zhang, W. Lefebvre, Z. Chen, V. Ji, Acta Materialia, 2020, 185, 287-299
Structural, Half-metallic and Magnetic Properties of the Imperfect Pb2FeReO6 Containing Eight Different Inherent Defects. Y. Zhang, H.-X. Chen, L. Duan, L. Ni, J.-B. Fan, J. Wang, G.-T. Ci, V. Ji, Journal of Magnetics, 2019, 24 (3), 413-422
Optimization of Microstructural Evolution during Laser Cladding of Ni Based Powder on GCI Glass Molds. F. Bourahima, A. L. Helbert, V. Ji, M. Rege, A. Courteaux, F. Brisset, T. Baudin, Key Engineering Materials, 2019, 813, 185-190
Surface layer characteristics of SAF2507 duplex stainless steel treated by stress shot peening. M. Chen, C. Jiang, Z. Xu, V. Ji, Applied Surface Science, 2019, 481, 226-233
Roles of growth mechanisms of Ni deposits on corrosion behaviors of NixAlyTi composite coatings. Y. Zhao, S. Xing, L. Wang, Y. Sun, H. Liu, K. Zhan, C. Jiang, V. Ji, W. Li, Applied Surface Science, 2019, 492, 177-188
Surface layer microstructures and wear properties modifications of Mg-8Gd-3Y alloy treated by shot peening. H. Liu, C. Jiang, M. Chen, L. Wang, V. Ji, Materials Characterization, 2019, 158, 109952
A new powder metallurgy routine to fabricate TiB2/Al–Zn–Mg–Cu nanocomposites based on composite powders with pre-embedded nanoparticles. Q. Yang, Y. Ma, Z. Chen, G. Ji, M.-L. Wang, S.-Y. Zhong, Y. Wu, V. Ji, H.-W. Wang, Materialia, 2019, 8, 100458
Effect of scandia content on the hot corrosion behavior of Sc2O3 and Y2O3 co-doped ZrO2 in Na2SO4 + V2O5 molten salts at 1000 °C. C. Chen, T. Liang, Y. Guo, X. Chen, Q. Man, X. Zhang, J. Zeng, V. Ji, Corrosion Science, 2019, 158, 108094
Prediction of the terminations and Miller planes of the tetragonal zirconia thin films as a gate dielectric layer in integrated-circuit industry. Y. Zhang, H.-X. Chen, L. Duan, L. Ni, J.-B. Fan, Z. Wang, V. Ji, Surface and Interface Analysis, 2019, 51, 774-782
Studying the insulating characters of cubic ZrO2 slabs with nine terminations within three lower index Miller planes (001), (110) and (111). Y. Zhang, H.-X. Chen, L. Duan, J.-B. Fan, L. Ni, Z. Wang, H. Li, V. Ji, Microelectronic Engineering, 2019, 213, 77-85
Influences of Al and Ti particles on microstructure, internal stress and property of Ni composite coatings. Y. Zhao, L. Wang, Y. Sun, H. Liu, C. Jiang, V. Ji, W. Li, Journal of Alloys and Compounds, 2019, 793, 314-325
Cube orientation bands observed in largely deformed Al-Sc alloys containing shearable precipitates. C.-Y. Dan, Z. Chen, G. Ji, S.-Y. Zhong, J. Li, X.-R. Li, F. Brisset, G.-A. Sun, H.-W. Wang, V. Ji, Scripta Materialia, 2019, 166, 139-143
Laser cladding of Ni based powder on a Cu-Ni-Al glassmold: Influence of the process parameters on bonding quality and coating geometry. F. Bourahima, A.-L. Helbert, M. Rege, V. Ji, D. Solas, T. Baudin, Journal of Alloys and Compounds, 2019, 771, 1018-1028
Investigation on microstructure and properties of Al18B4O33 whisker reinforced Al-Mg-Si matrix composite after shot peening. H. Liu, M. Chen, L. Wang, K. Zhan, V. Ji, C. Jiang, Vacuum, 2019, 160, 303-310
Experimental study of the mechanisms of nanoparticle influencing the fatigue crack growth in an in-situ TiB2/Al-Zn-Mg-Cu composite. Y. Ma, J. Geng, Z. Chen, M. Wang, D. Chen, G. Ji, V. Ji, H. Wang, Engineering Fracture Mechanics, 2019, 207, 23–35
Experimental study on macro- and microstress state, microstructural evolution of austenitic and ferritic steel processed by shot peening. M. Chen, C. Jiang, Z. Xu, K. Zhan, V. Ji, Surface and Coatings Technology, 2019, 359, 511-519
Residual stress and microstructure evolutions of SAF 2507 duplex stainless steel after shot peening. M. Chen, H. Liu, L. Wang, Z. Xu, V. Ji, C. Jiang, Applied Surface Science, 2018, 459, 155-163
Investigations into the Surface Strain/Stress State in a Single-Crystal Superalloy via XRD Characterization. H. Duan, L. Qin, Y. Pei, S. Li, L.-D. Zhao, V. Ji, S. Gong, Metals, 2018, 8, 376
A comparison study of the Born effective charges and dielectric properties of the cubic, tetragonal, monoclinic, ortho-I, ortho-II and ortho-III phases of zirconia. Y. Zhang, H.-X. Chen, L. Duan, J.-B. Fan, L. Ni, V. Ji, Solid State Sciences, 2018, 81, 58-65
Investigation on the thermostability of residual stress and microstructure in shot peened SAF 2507 duplex stainless steel. M. Chen, H. Liu, L. Wang, Z. Xu, V. Ji, C. Jiang, Vacuum, 2018, 153, 145-153
Investigation on microstructure and properties of electrodeposited Ni-Ti-CeO2 composite coating. L. Wang, Y. Zhao, C. Jiang, V. Ji, M. Chen, K. Zhan, F. Moreira, Journal of Alloys and Compounds, 2018, 754, 93-104
Microstructure evolution and hot corrosion mechanisms of Ba2REAlO5 (RE = Yb, Er, Dy) exposed to V2O5 + Na2SO4 molten salt. L. Guo, C. Zhang, Q. He, J. Yu, Z. Yan, F. Ye, C. Dan, V. Ji, Journal of the European Ceramic Society, 2018, 38, 3555-3563
Simultaneously increasing strength and ductility of nanoparticles reinforced Al composites via accumulative orthogonal extrusion process. J. Liu, Z. Chen, F. Zhang, G. Ji, M. Wang, Y. Ma, V. Ji, S. Zhong, Y. Wu, H. Wang, Materials Research Letters, 2018, 6, 406-412
A comparison study of the structural and mechanical properties of cubic, tetragonal, monoclinic, and three orthorhombic phases of ZrO2. Y. Zhang, H.-X. Chen, L. Duan, J.-B. Fan, L. Ni, V. Ji, Journal of Alloys and Compounds, 2018, 749, 283-292
Cold rolling texture evolution of TiB2 particle reinforced Al-based composites by Neutron Diffraction and EBSD analysis. C.-Y. Dan, Z. Chen, M.-H. Mathon, G. Ji, L.-W. Li, Y. Wu, F. Brisset, L. Guo, H.-W. Wang, V. Ji, Materials Characterization, 2018, 136, 293-301
Investigation on surface layer characteristics of shot peened graphene reinforced Al composite by X-ray diffraction method. K. Zhan, Y. Wu, J. Li, B. Zhao, Y. Yan, L. Xie, L. Wang, V. Ji, Applied Surface Science, 2018, 435, 1257-1264
Hot corrosion behavior of TiO2 doped, Yb2O3 stabilized zirconia exposed to V2O5 + Na2SO4 molten salt at 700–1000°C. L. Guo, Z. Yan, J. Yu, C. Zhang, M. Li, F. Ye, V. Ji, Ceramics International, 2018, 44, 261-268
Evaluation of the residual stress and microstructure character in SAF 2507 duplex stainless steel after multiple shot peening process. M. Chen, H. Liu, L. Wang, C. Wang, K. Zhu, Z. Xu, C. Jiang, V. Ji, Surface and Coatings Technology, 2018, 344, 132-140
Surface layer characteristics of CNT/Al–Mg–Si alloy composites treated by stress peening. K. Zhu, C. Jiang, V. Ji, Surface and Coatings Technology, 2017, 317, 10-16
Microstructure study of cold rolling nanosized in-situ TiB2 particle reinforced Al composites. C.-Y. Dan, Z. Chen, G. Ji, S.-H. Zhong, Y. Wu, F. Brisset, H.-W. Wang, V. Ji, Materials & Design, 2017, 130, 357-365
Effect of the shot peening on the deformation of Al alloy component. X. Zhang, K. Liao, V. Ji, H. Chen, L. Hu, Surface Engineering, 2017, 0, 1-8
The Roles of Ti Particles in Improving the Corrosion Resistance of Electrochemically Assembled Ni-Ti Composite Coatings. Y. Zhao, L. Wang, Z. Qin, C. Wang, Z. Xu, C. Jiang, V. Ji, CORROSION, 2017, 73, 1107-1118
Structural, electronic, and magnetic properties of double perovskite Pb2FeReO6 thin films with (001) orientation and three possible terminations. Y. Zhang, L. Duan, V. Ji, Surface and Interface Analysis, 2017, 49, 960-966
Optimisation of microstructure and corrosion resistance of Ni-Ti composite coatings by the addition of CeO2 nanoparticles. L. Wang, M. Chen, H. Liu, C. Jiang, V. Ji, F. Moreira, Surface and Coatings Technology, 2017, 331, 196-205
Structure transformation of Ti films deposited on SiC single crystal substrates. L. Li, Y. Liu, X. Mao, L. Zeng, V. Ji, Materials Characterization, 2017, 134, 64-68
Residual stress and microstructure evolution of shot peened Ni-Al bronze at elevated temperatures. C. Wang, C. Jiang, M. Chen, L. Wang, H. Liu, V. Ji, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 707, 629-635
Hot corrosion behavior of Ba2REAlO5 (RE = Dy, Er, Yb) ceramics by vanadium pentoxide at 900–1000°C. C. Zhang, L. Guo, J. Yu, M. Li, F. Ye, V. Ji, Ceramics International, 2017, 43, 11944-11952
Effects of TiO2 doping on the defect chemistry and thermo-physical properties of Yb2O3 stabilized ZrO2. L. Guo, C. Zhang, L. Xu, M. Li, Q. Wang, F. Ye, C. Dan, V. Ji, Journal of the European Ceramic Society, 2017, 37, 4163-4169
Microstructure study of cold rolling nanosized in-situ TiB2 particle reinforced Al composites. C.-Y. Dan, Z. Chen, G. Ji, S.-H. Zhong, Y. Wu, F. Brisset, H.-W. Wang, V. Ji, Materials & Design, 2017, 130, 357-365
Calcium-magnesium-alumina-silicate (CMAS) resistance property of BaLn2Ti3O10 (Ln=La, Nd) for thermal barrier coating applications. L. Guo, M. Li, C. Yang, C. Zhang, L. Xu, F. Ye, C. Dan, V. Ji, Ceramics International, 2017, Volume 43, Issue 13, Pages 10521–10527
Hot corrosion behavior of (Gd0.9Sc0.1)2Zr2O7 in V2O5 molten salt at 700–1000 °C. C. Zhang, M. Li, Y. Zhang, L. Guo, J. Dong, F. Ye, L. Li, V. Ji, Ceramics International, 2017, Volume 43, Pages 9041–9046
Surface mechanical property and residual stress of peened nickel-aluminum bronze determined by in-situ X-ray diffraction. C. Wang, C. Jiang, Y. Zhao, M. Chen, V. Ji, Applied Surface Science, 2017, Volume 420, Pages 28–33
Surface layer characteristics of CNT/Al–Mg–Si alloy composites treated by stress peening. K. Zhu, C. Jiang, V. Ji, Surface and Coatings Technology, 2017, Volume 317, Pages 10–16
Thermal stability of residual stresses and work hardening of shot peened tungsten cemented carbide. C. Wang, C. Jiang, V. Ji, Journal of Materials Processing Technology, 2017, 240, 98-103
Estimation of microstructure and corrosion properties of peened nickel aluminum bronze. C. Wang, C. Jiang, Z. Chai, M. Chen, L. Wang, V. Ji, Surface and Coatings Technology, 2017, 313, 136-142
Residual stress analysis on oxide layers obtained by high temperature oxidation of Chromia-forming alloys. N. Li, J. Xiao, N. Prud'Homme, L. Li, V. Ji, Materials Research Proceedings 2, 2016, pp 365-370
EFFECT OF HEAT TREATMENT ON THE MICROSTRUCTURAL EVOLUTION IN WELD REGION OF 304L PIPELINE STEEL. Z. Boumerzoug, S. Hamza, V. Ji, Journal of Thermal Engineering, 2016, Vol. 2, No. 6, Special Issue 5,, pp. 1017-1022
The half-metallic ferromagnetic characters of (001)-oriented thin films of the double perovskite Pb2FeMoO6. Y. Zhang, L. Duan, V. Ji, Thin Solid Films, 2016, 615, 318-323
The detailed crystal and electronic structures of the cotunnite-type ZrO2. Y. Zhang, L. Duan, V. Ji, Solid State Communications, 2016, 239, 27–31
Numerical analysis and experimental validation on residual stress distribution of titanium matrix composite after shot peening treatment. L. Xie, C. Wang, L. Wang, Z. Wang, C. Jiang, W. Lu, V. Ji, Mechanics of Materials, 2016, 99, 2–8
The detailed crystal and electronic structures of the cotunnite-type ZrO2. Y. Zhang, L. Duan, V. Ji, Solid State Communications, 2016, 239, 27-31
First-principles study of the structural, electronic, and magnetic properties of double perovskite Sr2FeReO6 containing various imperfections. Y. Zhang, L. Duan, V. Ji, K.-W. Xu, Chin. Phys. B, 2016, Vol. 25 Issue (5), 058102
The structural, electronic, and magnetic properties of the stoichiometric (001) surface of double perovskite Sr2FeMoO6. Y. Zhang, V. Ji, K.-W. Xu, Surface and Interface Analysis, 2016, 1040–1047
Microstructure and residual stresses in Ti-6Al-4V alloy pulsed and unpulsed TIG welds. B. Mehdi, R. Badji, V. Ji, B. Allili, D. Bradai, F.-D. Beaume, F. Soulié, Journal of Materials Processing Technology, 2016, 231, 441-448
Characterization on surface mechanical properties of Ti–6Al–4V after shot peening. L. Xie, Y. Wen, K. Zhan, L. Wang, C. Jiang, V. Ji, Journal of Alloys and Compounds, 2016, 666, 65-70
Effect of humidity on high temperature oxidation of AISI 430 stainless steel. N. Li, J. Xiao, N. Prud’Homme, V. Ji, Materials Science Forum, 2015, Vol. 833, pp 165-168
Structural, electronic and magnetic properties of the Si chains doped zigzag AlN nanoribbons. J.-M. Zhang, J. Zhang, K.-W. Xu, V. Ji, Physica E: Low-dimensional Systems and Nanostructures, 2015, 65, 114-119
Finite element analysis of laser shock peening of 2050-T8 aluminum alloy. N. Hfaiedh, P. Peyre, H. Song, I. Popa, V. Ji, V. Vignal, International Journal of Fatigue, 2015, 70, 480-489
Effects of Co contents on the microstructures and properties of electrodeposited NiCo–Al composite coatings. F. Cai, C. Jiang, P. Fu, V. Ji, Applied Surface Science, 2015, 324, 482-489
Two stages for the evolution of crystallite size and texture of electrodeposited Ni–ZrC composite coating. Z. Zhang, C. Jiang, F. Cai, P. Fu, N. Ma, V. Ji, Surface and Coatings Technology, 2015, 261, 122-129
Hydrogen adsorption and storage on palladium-decorated graphene with boron dopants and vacancy defects: A first-principles study. L. Ma, J.-M. Zhang, K.-W. Xu, V. Ji, Physica E: Low-dimensional Systems and Nanostructures, 2015, 66, 40-47
Effects of vertical strain on zigzag graphene nanoribbon with a topological line defect. L.-H. Qu, J.-M. Zhang, K.-W. Xu, V. Ji, Physica E: Low-dimensional Systems and Nanostructures, 2015, 67, 116-120
Effects of Co contents on the microstructures and properties of the electrodeposited NiCo–Zr composite coatings. F. Cai, C. Jiang, Y. Zhao, V. Ji, Materials Research Bulletin, 2015, 65, 195-203
A first-principles study on uniaxial strain effects of nonplanar oxygen-functionalized armchair graphene nanoribbons. L.-H. Qu, J.-M. Zhang, K.-W. Xu, V. Ji, Journal of Alloys and Compounds, 2015, 631, 219-224
Fabrication and characterization of Ni–Zr composite coatings using electrodepositing technique. F. Cai, C. Jiang, Z. Zhang, E. Muttini, P. Fu, Y. Zhao, V. Ji, Journal of Alloys and Compounds, 2015, 635, 73-81
Characterization of the deformation texture after tensile test and cold rolling of a Ti-6Al-4V sheet alloy. B. Mehdi, H. Azzeddine, R. Badji, V. Ji, B. Alili, D. Bradai, IOP Conf. Series: Materials Science and Engineering, 2015, 82, 012018
A first-principles study on gas sensing properties of graphene andPd-doped graphene. L. Ma, J.-M. Zhang, K.-W. Xu, V. Ji, Applied Surface Science, 2015, 343, 121–127
Effects of the defects on the structural, electronic and magnetic properties of Sr2FeMoO6. Y. Zhang, V. Ji, K.-W. Xu, Journal of Alloys and Compounds, 2015, 648, 374-381
Residual stress distribution and microstructure in the friction stir weld of 7075 aluminum alloy. P. Ji, Z. Yang, J. Zhang, L. Zheng, V. Ji, V. Klosek, J Mater Sci, 2015, 50, 7262–7270
Quantitative study of particle size distribution in an in-situ grown Al–TiB2 composite by synchrotron X-ray diffraction and electron microscopy. Y. Tan, Z. Chen, A. Borbélyb, G. Ji, S.-Y. Zhong, D. Schryvers, V. Ji, H.-W. Wang, Materials Characterization, 2015, 102, 131–136
Effects of the defects on the half-metallic characters and magnetic properties in double perovskite Pb2FeMoO6. Y. Zhang, K.-W. Xu, V. Ji, Materials Chemistry and Physics, 2015, 162, 711-723
Study of ion diffusion in oxidation films grown on a model Fe–15%Cr alloy. A. C. S. Sabioni, J. N. V. Souza, V. Ji, F. Jomard, V. B. Trindade, J. F. Carneiro, Solid State Ionics, 2015, 276, 1–8
Residual stress study in oxide scale obtained on high temperature oxidation of AISI 430 stainless steel. N. Li, J. Xiao, N. Prud’Homme, V. Ji, Advanced Materials Research, 2014, Vol. 996, pp 918-923
Structural and electronic properties of copper nanowires inside zigzag carbon nanotubes. Y.-N. Duan, J.-M. Zhang, X.-M. Wei, X.-X. Fan, K.-W. Xu, V. Ji, Physica B: Condensed Matter, 2014, 447, 77-82
Improving SO2 gas sensing properties of graphene by introducing dopant and defect: A first-principles study. X.-Y. Liu, J.-M. Zhang, K.-W. Xu, V. Ji, Applied Surface Science, 2014, 313, 405-410
Synthesis and characterization of Ni–Al–Y2O3 composite coatings with different Y2O3 particle content. F. Cai, C. Jiang, Z. Zhang, V. Ji, Ceramics International, 2014, 40, 15105-15111
Residual stress study in oxide scale obtained on high temperature oxidation of AISI 430 stainless steel. N. Li, J. Xiao, N. Prud'Homme, V. Ji, Advanced Materials Research, 2014, 966, 918-923
Residual stresses in oxide scale formed on Fe–17Cr stainless steel. N. Li, J. Xiao, N. Prud'Homme, Z. Chen, V. Ji, Applied Surface Science, 2014, 316, 108-113
X-Ray Analysis of Residual Stress in Weld Region of X70 Pipeline Steel. Z. Boumerzoug, K. Digheche, V. Ji, Advanced Materials Research, 2014, Vol. 936, 2011-2016
Residual Stress and Microstructures Characterization in Welded Al-Si- 12Cu Alloy. Z. Boumerzoug, C. Bouremel, V. Ji, Advanced Materials Research, 2014, Vol. 856, 201-204
Residual stress and micro-structure of GCr15 steel after multistep shot peening. P. Fu, C. Jiang, Z. Zhang, V. Ji, Surface Engineering, 2014, VOL 30 NO 11, 847-851
Nitrogen and Boron substitutional doped zigzag silicene nanoribbons: Ab initio investigation. L. Ma, J.-M. Zhang, K.-W. Xu, V. Ji, Physica E, 2014, 60, 112–117
Armchair graphene nanoribbos under shear strain. L.-H. Qu, J.-M. Zhang, K.-W. Xu, V. Ji, Physica E, 2014, 60, 156–159
Magnetic properties and possible martensitic transformation in Mn2NiSi and Ni2MnSi Heusler alloys. Q.-L. Fang, J.-M. Zhang, X.-M. Zhao, K.-W. Xu, V. Ji, Journal ofMagnetismandMagneticMaterials, 2014, 362, 42–46
The study of the P doped silicene nanoribbons with first-principles. J.-M. Zhang, W.-T. Song, K.-W. Xu, V. Ji, Computational Materials Science, 2014, 95, 429–434
Effects of the 3d transition metal doping on the structural, electronic, and magnetic properties of BeO nanotubes. J.-M. Zhang, W.-T. Song, H.-H. Li, K.-W. Xu, V. Ji, Chin. Phys. B, 2014, Vol. 23, No. 1, 017103-01/06